6 ADML_INSTANCES=`cat .st_conf_adml_instances 2>/dev/null`
7 RATE_PER_INSTANCE=`cat .st_conf_rate_per_instance 2>/dev/null`
8 DESIRED_RATE=`cat .st_conf_desired_rate 2>/dev/null`
9 REPEATS=`cat .st_conf_cycle_repeats 2>/dev/null`
10 PROGRAM_LAYOUT_FILE=.st_conf_n_testcases_program_layout
11 [ -z "$ADML_CONCURRENT_PROVISION_JOBS" ] && ADML_CONCURRENT_PROVISION_JOBS=10
23 Usage: $0 <test stuff directory|dynamic> [-s]
25 Performs test case programming from scratch (current test cases will be dropped
26 from ADML involved instances). There are two types of programming depending on
27 the first argument provided:
31 The folder provided must contain msk files, specially a testcase file with
32 xml files referenced inside. Those xml files (without the .msk extension)
33 shall exists in the directory. For example:
35 $0 st_examples/DynamicQualification
37 Optionally, a file 'specific' could exists containing testcase-specific
38 information, which normally will be used to specify database sentences.
39 This file will be accumulated as a cloning seed over the file 'specific.all'
40 created on test stuff directory.
42 Template type programming could be used for medium-duration testings, because
43 the scripting used for programming, have lots of groups divisions which even
44 background-executed are much more slower on programming than a c++ builtin
45 procedure: dynamic type is the one for large sets of test cases:
50 The current dynamic procedure selected by mean 'dynlibs/select.sh' script,
51 will be programmed using its dirname resources: inside, you may found not
52 only the .so library but the needed xml files for the implemented scenary
53 and a file called 'dynamic.suffix' used to complete the dynamic operation
56 dynamic|<timeout ms>|<initial sequence>|<final sequence>|<dynamic.suffix content>
58 For example, you could have this content for 'dynamic.suffix':
60 0|7|CCR-I.xml|CCR-T.xml (0 for timeout means no timeout step)
62 in order to generate the operation:
64 dynamic|0|<initial sequence>|<final sequence>|7|CCR-I.xml|CCR-T.xml
66 which would be parsed for the specific ADML instance programmed:
68 dynamic|0|2000001|2001000|7|CCR-I.xml|CCR-T.xml
70 The file 'dynamic.suffix' could have several lines for several scenaries.
71 In this case, this script will prompt for the desired one.
73 This script will build every operation for the configured ADML instances
74 to complete all the sequence ranges along the whole test system.
78 -s: start testing just after programming, using desired rate: $DESIRED_RATE test cases per second.
80 [ $ADML_INSTANCES -gt 1 ] && echo " In your case, with $ADML_INSTANCES, a rate of $RATE_PER_INSTANCE ttps will be send per instance."
85 advice_to_squeeze_idle_cpu () {
86 local idle=$(top -b -d 0.1 -n 2 | grep 'Cpu(s):'| tail -1 | awk '{print $8}' | sed 's/,/./')
89 echo "Idle cpu now: $idle. Check the system CPU with top. If is not overcommited, consider"
90 echo " increase the environment variable 'ADML_CONCURRENT_PROVISION_JOBS' (now $ADML_CONCURRENT_PROVISION_JOBS)."
98 [ ! -f .st_conf_adml_instances ] && miss_conf=yes
99 [ ! -f .st_conf_n_testcases_program_layout ] && miss_conf=yes
100 [ ! -f .st_conf_cycle_repeats ] && miss_conf=yes
101 [ ! -f .st_conf_rate_per_instance ] && miss_conf=yes
102 [ ! -f .st_conf_desired_rate ] && miss_conf=yes
103 [ -n "$miss_conf" ] && _exit "You must run './configure.sh' script firtly !!"
107 echo "Testcases programming ..."
111 [ $? -ne 0 ] && _exit "Fix status to continue ..."
113 # We launch in background !
114 #./operation.sh --ping >/dev/null
115 #[ $? -ne 0 ] && _exit "Programming aborted (some ADML client process is not running) !"
121 # test case stuff programming #########################################################
122 if [ "$PROG_TYPE" != "dynamic" ]
124 TESTCASE_DIR=$PROG_TYPE
126 [ ! -d $TESTCASE_DIR ] && _exit "Cannot found the test directory '$TESTCASE_DIR' !!"
127 TESTCASE=( `ls $TESTCASE_DIR/testcase*msk 2>/dev/null` )
128 TESTCASE_FILES=${#TESTCASE[@]}
129 [ $TESTCASE_FILES -ne 1 ] && _exit "One and only one 'testcase*msk' file must be present !!"
131 MAX_NUMBER_GROUPS=$(grep ^MAX_NUMBER_GROUPS= clone.sh | cut -d= -f2)
132 CLONE_GROUPS=$((MAX_NUMBER_GROUPS/ADML_INSTANCES))
135 [ -f $TESTCASE_DIR/specific ] && specific=specific
140 instance=$(echo $line | awk '{ print $1 }')
141 ini_seq=$(echo $line | awk '{ print $2 }')
142 fin_seq=$(echo $line | awk '{ print $3 }')
143 ADML_DIR=`readlink -f ADMLS/ADML-$instance`
144 echo -e "\rCloning interval [$ini_seq,$fin_seq] for $(basename $ADML_DIR) ..."
145 ./clone.sh $ADML_DIR $TESTCASE $ini_seq $fin_seq $CLONE_GROUPS $specific &
148 if [ $count -eq $ADML_CONCURRENT_PROVISION_JOBS ]
154 done < $PROGRAM_LAYOUT_FILE
156 # Advice for idle cpu:
157 advice_to_squeeze_idle_cpu
159 # Wait background jobs to finish:
161 echo "Waiting for clone completion ..."
162 echo "(please be patient, this may take a while)"
164 echo "Background Jobs: $(jobs -p | wc -l)"
168 echo "Programming has finished !"
171 echo "Configuring repeat cycles ..."
172 ./operation.sh "test|repeats|$REPEATS"
174 if [ -n "$specific" ]
176 echo "A new file '$TESTCASE_DIR/specific.all' has been created."
177 echo "Probably you need to apply it before starting traffic."
179 echo "Press ENTER to continue, CTRL-C to abort ..."
183 # dynamic programming #################################################################
185 TESTCASE_DIR=$(readlink -f dynlibs/libanna_dynamicLauncherProcedure.so | xargs dirname)
186 DYNAMIC_SUFFIX_FILE=$TESTCASE_DIR/dynamic.suffix
188 [ ! -f $DYNAMIC_SUFFIX_FILE ] && _exit "Missing '$DYNAMIC_SUFFIX_FILE' file.\nUse 'dynlibs/select.sh' to change the dynamic procedure and restart the ADML instances."
189 dynamic_suffix=( $(grep -v ^# $DYNAMIC_SUFFIX_FILE) )
191 # Multiple scenarios:
192 suffixes=${#dynamic_suffix[@]}
193 if [ $suffixes -gt 1 ]
196 echo "----------------------------------------------------------------"
197 cat $DYNAMIC_SUFFIX_FILE
198 echo "----------------------------------------------------------------"
200 echo "Detected $suffixes scenarios:"
204 for line in $(grep -v ^# $DYNAMIC_SUFFIX_FILE)
211 echo "Select the desired option (0 to input a user defined one):"
213 while [ -z "$option" ]; do read option ; done
214 if [ "$option" != "0" ]
216 dynamic_suffix=$(grep "^${option}) " $tmpfile | cut -d" " -f2-)
217 [ -z "$dynamic_suffix" ] && _exit "Invalid option !"
219 echo "Input specific program arguments:"
220 echo " (be sure that are supported by the dynamic procedure)"
223 while [ -z "$dynamic_suffix" ]; do read dynamic_suffix ; done
227 # Modify xml files path:
228 xmls=( $(echo $dynamic_suffix | sed 's/'\|'/ /g') )
229 dynamic_suffix=$(for xml in ${xmls[@]}
231 echo $xml | grep -q "\.xml$"
232 [ $? -eq 0 ] && echo -n "$TESTCASE_DIR/"
234 done | sed 's/'\|'$//')
236 # If still idle CPU, you could increase chunks number of background jobs
237 echo "Dynamic programming ..."
241 instance=$(echo $line | awk '{ print $1 }')
242 ini_seq=$(echo $line | awk '{ print $2 }')
243 fin_seq=$(echo $line | awk '{ print $3 }')
244 ADML_DIR=`readlink -f ADMLS/ADML-$instance`
247 ./operation.sh -t 60 "dynamic|$ini_seq|$fin_seq|$dynamic_suffix" &
250 if [ $count -eq $ADML_CONCURRENT_PROVISION_JOBS ]
257 done < $PROGRAM_LAYOUT_FILE
259 # Advice for idle cpu:
260 advice_to_squeeze_idle_cpu
267 if [ "$AUTOSTART" = "-s" ]
273 To start testing, you must use the './operation.sh' script. The most
274 common commands used for testing are:
276 - Enable reports dump for failed tests: ./operation.sh "test|report|failed"
277 - Launch traffic: ./operation.sh "test|ttps|<test ticks per second (*)>"
279 (*) this is related to a single instance, because operation script launched
280 here invokes every 'ADMLS/ADML-<instance>/operation.sh' counterpart
281 script. Then, you should divide the desired CPS by the number of
282 instances. For example, if you need $DESIRED_RATE test cases per second,
283 as you have $ADML_INSTANCES instances, then you should execute:
285 ./operation.sh "test|ttps|$RATE_PER_INSTANCE"
287 - Stop traffic: ./operation.sh "test|ttps|0"
288 - Reset already classified (Success/Failed) test cases: ./operation.sh "test|reset[|soft]"
289 - Reset also 'in-progress' state test cases: ./operation.sh "test|reset|hard"
290 - Clear programmed test cases: ./operation.sh "test|clear"
292 Remember that './operation.sh' broadcasts the operation scripts inside
293 the ADML instances, then some operations should better be used within
294 a specific 'ADMLS/ADML-<instance>' directory to avoid console spam:
296 - Check a testcase in runtime: ADMLS/ADML-001/operation.sh "test|look|<test id>"
297 - Execute the next programmed test case: ADMLS/ADML-001/operation.sh "test|next"
298 - Interactive-step execution: ADMLS/ADML-001/operation.sh "test|interact|<steps to execute>|<test id>"
299 - Summary: ADMLS/ADML-001/operation.sh "test|summary"
301 For a complete and detailed information, execute: ./operation.sh --help | less
303 You could also use './launchCPS.sh' script.
309 if [ -n "$start_testing" ]
312 echo "Start testing to achieve desired rate of $DESIRED_RATE test cases per second ..."
314 ./operation.sh "test|ttps|$RATE_PER_INSTANCE"