1 // ANNA - Anna is Not Nothingness Anymore //
3 // (c) Copyright 2005-2015 Eduardo Ramos Testillano & Francisco Ruiz Rayo //
5 // See project site at http://redmine.teslayout.com/projects/anna-suite //
6 // See accompanying file LICENSE or copy at http://www.teslayout.com/projects/public/anna.LICENSE //
10 #include <sstream> // std::istringstream
11 #include <iostream> // std::cout
12 #include <math.h> // ceil
14 #include <unistd.h> // chdir
17 #include <anna/timex/Engine.hpp>
18 #include <anna/statistics/Engine.hpp>
19 #include <anna/diameter/codec/functions.hpp>
20 #include <anna/diameter/codec/Engine.hpp>
21 #include <anna/diameter/codec/EngineManager.hpp>
22 #include <anna/http/Transport.hpp>
23 #include <anna/diameter/stack/Engine.hpp>
24 #include <anna/diameter/helpers/base/functions.hpp>
25 #include <anna/time/functions.hpp>
26 #include <anna/diameter.comm/ApplicationMessageOamModule.hpp>
27 #include <anna/xml/xml.hpp>
28 #include <Procedure.hpp>
31 #include <Launcher.hpp>
32 #include <OriginHost.hpp>
33 #include <MyDiameterEngine.hpp>
34 #include <TestManager.hpp>
35 #include <TestCase.hpp>
38 #define SIGUSR2_TASKS_INPUT_FILENAME "sigusr2.in"
39 #define SIGUSR2_TASKS_OUTPUT_FILENAME "sigusr2.out"
42 const char *ServicesDTD = "\
43 <?xml version=\"1.0\" encoding=\"UTF-8\"?>\n\
44 <!-- Diameter services DTD -->\n\
46 <!ELEMENT services (stack*, node*)>\n\
48 <!ELEMENT stack EMPTY>\n\
49 <!ATTLIST stack id CDATA #REQUIRED dictionary CDATA #REQUIRED validationMode (BeforeEncoding | AfterDecoding | Always | Never) #IMPLIED validationDepth (Complete | FirstError) #IMPLIED fixMode (BeforeEncoding | AfterDecoding | Always | Never) #IMPLIED ignoreFlagsOnValidation (yes | no) #IMPLIED>\n\
53 id: Normally the id corresponds to the Application-Id for which the dictionary provided is designed\n\
54 (in multistack applications, it shall be mandatory respect such association to know the stack used\n\
55 for processed messages).\n\
56 dictionary: Path to the dictionary file.\n\
57 validationMode: Sets the validation mode. Default is 'AfterDecoding'.\n\
58 validationDepth: Sets the validation depth. Default is 'FirstError'.\n\
59 fixMode: Sets the fix mode. Default is 'BeforeEncoding'.\n\
60 ignoreFlagsOnValidation: Ignore flags during message validation. Default is 'no'.\n\
63 <!ELEMENT node EMPTY>\n\
64 <!ATTLIST node originHost CDATA #REQUIRED applicationId CDATA #REQUIRED originRealm CDATA #IMPLIED cer CDATA #IMPLIED dwr CDATA #IMPLIED cea CDATA #IMPLIED allowedInactivityTime CDATA #IMPLIED tcpConnectDelay CDATA #IMPLIED answersTimeout CDATA #IMPLIED ceaTimeout CDATA #IMPLIED watchdogPeriod CDATA #IMPLIED entity CDATA #IMPLIED entityServerSessions CDATA #IMPLIED diameterServer CDATA #IMPLIED diameterServerSessions CDATA #IMPLIED balance (yes | no) #IMPLIED sessionBasedModelsClientSocketSelection (SessionIdLowPart | SessionIdHighPart | SessionIdOptionalPart | RoundRobin) #IMPLIED retries CDATA #IMPLIED log CDATA #IMPLIED splitLog (yes | no) #IMPLIED detailedLog (yes | no) #IMPLIED dumpLog (yes | no) #IMPLIED burstLog (yes | no) #IMPLIED>\n\
68 originHost: Node identifier as diameter application host name.\n\
69 applicationId: The Application-Id provided must exists as a registered 'stack id'.\n\
70 originRealm: Origin-Realm (domain-name internally used by default).\n\
73 - Diameter clients:\n\
75 entity: Target diameter entity (comma-separated '<address>:<port>' format).\n\
76 For example: 10.20.30.40:3868,10.20.30.41:3868. If missing, no entity will be enabled.\n\
77 entityServerSessions: Diameter entity server sessions (0: diameter entity disabled). Default value of 1.\n\
78 cer: User defined CER path file to be encoded to establish diameter connections.\n\
79 If missing, will be harcoded.\n\
80 dwr: User defined DWR path file to be encoded for diameter protocol keep alive.\n\
81 If missing, will be harcoded.\n\
82 tcpConnectDelay: Milliseconds to wait TCP connect to any server. If missing, default value of 200 will\n\
84 ceaTimeout: Milliseconds to wait CEA from diameter server. If missing, default value of 'answersTimeout'\n\
86 watchdogPeriod: Milliseconds for watchdog timer (Tw) for diameter keep-alive procedure. If missing, default\n\
87 value of 30000 will be assigned.\n\
88 balance: Balance over entity servers instead of doing standard behaviour (first primary, secondary\n\
89 if fails, etc.). Default value 'no'.\n\
90 sessionBasedModelsClientSocketSelection: By default, round-robin will be applied for IEC model (SMS/MMS), and Session-Id Low Part\n\
91 will be analyzed for ECUR/SCUR model (data, voice and content). You could change ECUR/SCUR\n\
92 analysis behaviour providing 'SessionIdHighPart', 'SessionIdOptionalPart' (atoi applied;\n\
93 usually subscriber id data, i.e. MSISDN or IMSI) and 'RoundRobin' (also 'SessionIdLowPart').\n\
96 - Diameter servers:\n\
98 diameterServer: Diameter own server address in '<address>:<port>' format. For example: 10.20.30.40:3868.\n\
99 If missing, no local server will be enabled.\n\
100 diameterServerSessions: Diameter own server available connections (0: diameter server disabled). Default value of 1.\n\
101 Negative value implies no limit accepting incoming connections.\n\
102 cea: User defined CEA path file to be encoded to answer client CERs.\n\
103 If missing, will be harcoded.\n\
104 allowedInactivityTime: Milliseconds for the maximum allowed inactivity time on server sessions born over the\n\
105 local server before being reset. If missing, default value of 90000 will be assigned.\n\
110 answersTimeout: Milliseconds to wait pending application answers from diameter peers. If missing,\n\
111 default value of 10000 will be assigned.\n\
112 retries: Expired responses will cause a number of request retransmissions. Disabled by default (0 retries).\n\
113 log: Process log file (operations result, traffic log, etc.). By default '<originHost>.launcher.log'.\n\
114 Empty string or \"null\" name, to disable. Warning: there is no rotation for log files\n\
115 (use logrotate or whatever you consider).\n\
116 splitLog: Splits log file (appends to log filename, extensions with the type of event: see help on\n\
117 startup information-level traces). No log files for code/decode and load operations are created.\n\
118 Default value 'no'.\n\
119 detailedLog: Insert detailed information at log files (timestamps, communication resources, etc.). Useful\n\
120 to analyze the messages flow along the sockets (specially on 'balance' mode). Default 'no'.\n\
121 dumpLog: Write to disk every incoming/outcoming message named as:\n\
122 '<unix ms timestamp>.<originHost>.<hop by hop>.<end to end>.<message code>.<request|answer>.<type of event>.xml'\n\
123 Default value 'no'.\n\
124 burstLog: Burst operations log file. By default '<originHost>.launcher.burst'. Empty string or \"null\" name, to disable.\n\
125 Warning: there is no rotation for log files (use logrotate or whatever). Output: dot (.) for each\n\
126 burst message sent/pushed, cross (x) for popped ones, and order number when multiple of 1% of burst\n\
127 list size, plus OTA requests when changed.\n\
134 Launcher::Launcher() : anna::comm::Application("launcher", "DiameterLauncher", "1.1"), a_communicator(NULL) {
136 a_counterRecorder = NULL;
137 a_admlMinResolution = 2 * anna::timex::Engine::minResolution; // 2*10 = 20 ms; 1000/20 = 50 ticks per second;
138 //a_admlMinResolution = (anna::Millisecond)100;
139 a_counterRecorderClock = NULL;
141 // a_originHosts.clear();
142 a_workingNode = NULL;
144 a_httpServerSocket = NULL;
148 std::string Launcher::getSignalUSR2InputFile() const throw() {
149 return (a_initialWorkingDirectory + "/" + SIGUSR2_TASKS_INPUT_FILENAME);
152 std::string Launcher::getSignalUSR2OutputFile() const throw() {
153 return (a_initialWorkingDirectory + "/" + SIGUSR2_TASKS_OUTPUT_FILENAME);
157 void Launcher::servicesFromXML(const anna::xml::Node* servicesNode, bool eventOperation) throw(anna::RuntimeException) {
159 CommandLine& cl(anna::CommandLine::instantiate());
160 bool allLogsDisabled = cl.exists("disableLogs");
162 //<!ATTLIST stack id CDATA #REQUIRED dictionary CDATA #REQUIRED>
163 const anna::xml::Attribute *id, *dictionary;
165 // <!ATTLIST node originHost CDATA #REQUIRED applicationId CDATA #REQUIRED cer CDATA #IMPLIED dwr CDATA #IMPLIED allowedInactivityTime CDATA #IMPLIED tcpConnectDelay CDATA #IMPLIED answersTimeout CDATA #IMPLIED ceaTimeout CDATA #IMPLIED watchdogPeriod CDATA #IMPLIED entity CDATA #IMPLIED entityServerSessions CDATA #IMPLIED diameterServer CDATA #IMPLIED diameterServerSessions CDATA #IMPLIED balance (yes | no) #IMPLIED sessionBasedModelsClientSocketSelection (SessionIdLowPart | SessionIdHighPart | SessionIdOptionalPart | RoundRobin) #IMPLIED retries CDATA #IMPLIED log CDATA #IMPLIED splitLog (yes | no) #IMPLIED detailedLog (yes | no) #IMPLIED dumpLog (yes | no) #IMPLIED burstLog (yes | no) #IMPLIED>
166 const anna::xml::Attribute *originHost, *appId, *originRealm, *cer, *dwr, *cea, *allowedInactivityTime, *tcpConnectDelay,
167 *answersTimeout, *ceaTimeout, *watchdogPeriod, *entity, *entityServerSessions,
168 *diameterServer, *diameterServerSessions, *balance, *sessionBasedModelsClientSocketSelection,
169 *retries, *log, *splitLog, *detailedLog, *dumpLog, *burstLog;
170 // Never clear services content from here (append new data from xml). At the moment no node removing is implemented in this process
173 anna::diameter::stack::Engine &stackEngine = anna::diameter::stack::Engine::instantiate();
174 anna::diameter::stack::Dictionary *d;
175 const anna::diameter::stack::Dictionary *bpd = NULL; // base protocol dictionary
177 // Codec engine manager:
178 anna::diameter::codec::EngineManager &em = anna::diameter::codec::EngineManager::instantiate();
179 anna::diameter::codec::Engine *ce;
181 ///////////////////////////////////////////
182 // APPLICATION MESSAGE OAM MODULE SCOPES //
183 ///////////////////////////////////////////
184 // We will register a scope per stack id registered. The counters will be dynamically registered at count method.
185 anna::diameter::comm::ApplicationMessageOamModule & appMsgOamModule = anna::diameter::comm::ApplicationMessageOamModule::instantiate();
186 appMsgOamModule.enableCounters(); // this special module is disabled by default (the only)
187 static int scope_id = 3;
188 unsigned int id_value;
189 std::string codecEngineName;
191 for(anna::xml::Node::const_child_iterator it = servicesNode->child_begin(); it != servicesNode->child_end(); it++) {
192 std::string nodeName = (*it)->getName();
194 if(nodeName == "stack") {
196 id = (*it)->getAttribute("id");
197 dictionary = (*it)->getAttribute("dictionary");
198 id_value = id->getIntegerValue();
200 if (stackEngine.getDictionary(id_value)) { // Ignore (but don't fail) dictionary load with same stack id already registered
201 LOGWARNING(anna::Logger::warning(anna::functions::asString("Ignore dictionary load for stack id already registered: %llu", id_value), ANNA_FILE_LOCATION));
206 d = stackEngine.createDictionary(id_value, dictionary->getValue());
207 LOGDEBUG(anna::Logger::debug(anna::functions::asString("Created dictionary (%p) for stack id %llu", d, id_value), ANNA_FILE_LOCATION));
209 // OAM module for counters:
210 appMsgOamModule.createStackCounterScope(scope_id, id_value /* application-id */);
213 } catch(anna::RuntimeException &ex) {
214 //_exit(ex.asString());
218 bpd = d; // base protocol dictionary in case of monostack. If multistack, will be calculated later
220 // Create codec engine and register it in the codec engine manager:
221 codecEngineName = anna::functions::asString("CodecEngineForStackId_%llu", id_value);
222 ce = new anna::diameter::codec::Engine(codecEngineName.c_str(), d);
223 em.registerCodecEngine(id_value, ce);
225 // Codec engine configuration:
226 const anna::xml::Attribute *vm_attr = (*it)->getAttribute("validationMode", false /* no exception */);
227 const anna::xml::Attribute *vd_attr = (*it)->getAttribute("validationDepth", false /* no exception */);
228 const anna::xml::Attribute *fm_attr = (*it)->getAttribute("fixMode", false /* no exception */);
229 const anna::xml::Attribute *if_attr = (*it)->getAttribute("ignoreFlagsOnValidation", false /* no exception */);
231 std::string vm_value = vm_attr ? vm_attr->getValue() : "AfterDecoding";
232 std::string vd_value = vd_attr ? vd_attr->getValue() : "FirstError";
233 std::string fm_value = fm_attr ? fm_attr->getValue() : "BeforeEncoding";
235 anna::diameter::codec::Engine::ValidationMode::_v vm;
236 if (vm_value == "BeforeEncoding") vm = anna::diameter::codec::Engine::ValidationMode::BeforeEncoding;
237 else if (vm_value == "AfterDecoding") vm = anna::diameter::codec::Engine::ValidationMode::AfterDecoding;
238 else if (vm_value == "Always") vm = anna::diameter::codec::Engine::ValidationMode::Always;
239 else if (vm_value == "Never") vm = anna::diameter::codec::Engine::ValidationMode::Never;
240 ce->setValidationMode(vm);
242 anna::diameter::codec::Engine::ValidationDepth::_v vd;
243 if (vd_value == "Complete") vd = anna::diameter::codec::Engine::ValidationDepth::Complete;
244 else if (vd_value == "FirstError") vd = anna::diameter::codec::Engine::ValidationDepth::FirstError;
245 ce->setValidationDepth(vd);
247 anna::diameter::codec::Engine::FixMode::_v fm;
248 if (fm_value == "BeforeEncoding") fm = anna::diameter::codec::Engine::FixMode::BeforeEncoding;
249 else if (fm_value == "AfterDecoding") fm = anna::diameter::codec::Engine::FixMode::AfterDecoding;
250 else if (fm_value == "Always") fm = anna::diameter::codec::Engine::FixMode::Always;
251 else if (fm_value == "Never") fm = anna::diameter::codec::Engine::FixMode::Never;
254 bool if_value = (if_attr ? (if_attr->getValue() == "yes") : false);
255 ce->ignoreFlagsOnValidation(if_value);
259 // Show loaded stacks:
260 std::cout << "Stacks currently loaded:" << std::endl;
261 std::cout << anna::functions::tab(stackEngine.asString(false /* light */)) << std::endl;
263 // Basic checking for multistack:
264 bool multistack = (stackEngine.stack_size() > 1);
266 bpd = stackEngine.getDictionary(0);
268 throw anna::RuntimeException("In multistack applications is mandatory register a stack id = 0 using a dictionary which contains the needed elements to build base protocol messages (CER/A, DWR/A, DPR/A, STR/A, etc.)", ANNA_FILE_LOCATION);
272 for(anna::xml::Node::const_child_iterator it = servicesNode->child_begin(); it != servicesNode->child_end(); it++) {
273 std::string nodeName = (*it)->getName();
275 if(nodeName == "node") {
277 originHost = (*it)->getAttribute("originHost");
278 appId = (*it)->getAttribute("applicationId");
279 originRealm = (*it)->getAttribute("originRealm", false /* no exception */);
280 cer = (*it)->getAttribute("cer", false /* no exception */);
281 dwr = (*it)->getAttribute("dwr", false /* no exception */);
282 cea = (*it)->getAttribute("cea", false /* no exception */);
283 allowedInactivityTime = (*it)->getAttribute("allowedInactivityTime", false /* no exception */);
284 tcpConnectDelay = (*it)->getAttribute("tcpConnectDelay", false /* no exception */);
285 answersTimeout = (*it)->getAttribute("answersTimeout", false /* no exception */);
286 ceaTimeout = (*it)->getAttribute("ceaTimeout", false /* no exception */);
287 watchdogPeriod = (*it)->getAttribute("watchdogPeriod", false /* no exception */);
288 entity = (*it)->getAttribute("entity", false /* no exception */);
289 entityServerSessions = (*it)->getAttribute("entityServerSessions", false /* no exception */);
290 diameterServer = (*it)->getAttribute("diameterServer", false /* no exception */);
291 diameterServerSessions = (*it)->getAttribute("diameterServerSessions", false /* no exception */);
292 balance = (*it)->getAttribute("balance", false /* no exception */); // (yes | no)
293 sessionBasedModelsClientSocketSelection = (*it)->getAttribute("sessionBasedModelsClientSocketSelection", false /* no exception */); // (SessionIdHighPart | SessionIdOptionalPart | RoundRobin)
294 retries = (*it)->getAttribute("retries", false /* no exception */);
295 log = (*it)->getAttribute("log", false /* no exception */);
296 splitLog = (*it)->getAttribute("splitLog", false /* no exception */); // (yes | no)
297 detailedLog = (*it)->getAttribute("detailedLog", false /* no exception */); // (yes | no)
298 dumpLog = (*it)->getAttribute("dumpLog", false /* no exception */); // (yes | no)
299 burstLog = (*it)->getAttribute("burstLog", false /* no exception */); // (yes | no)
302 origin_hosts_it nodeIt = a_originHosts.find(originHost->getValue());
303 if (nodeIt != a_originHosts.end()) {
304 std::string msg = "Already registered such Origin-Host: "; msg += originHost->getValue();
305 throw anna::RuntimeException(msg, ANNA_FILE_LOCATION);
308 unsigned int applicationId = appId->getIntegerValue();
309 if (!stackEngine.getDictionary(applicationId)) {
310 std::string msg = "Cannot found a registered stack id with the value of applicationId provided: "; msg += appId->getValue();
311 throw anna::RuntimeException(msg, ANNA_FILE_LOCATION);
314 // Engine time measures checking & assignment:
315 anna::Millisecond allowedInactivityTimeMs(90000);
316 anna::Millisecond tcpConnectDelayMs(200);
317 anna::Millisecond answersTimeoutMs(10000);
318 anna::Millisecond ceaTimeoutMs(10000);
319 anna::Millisecond watchdogPeriodMs(30000);
321 if (allowedInactivityTime) allowedInactivityTimeMs = checkTimeMeasure("allowedInactivityTime", allowedInactivityTime->getValue());
322 if (tcpConnectDelay) tcpConnectDelayMs = checkTimeMeasure("tcpConnectDelay", tcpConnectDelay->getValue());
323 if (answersTimeout) answersTimeoutMs = checkTimeMeasure("answersTimeout", answersTimeout->getValue());
324 if (ceaTimeout) ceaTimeoutMs = checkTimeMeasure("ceaTimeout", ceaTimeout->getValue());
325 if (watchdogPeriod) watchdogPeriodMs = checkTimeMeasure("watchdogPeriod", watchdogPeriod->getValue());
327 // Checking command line parameters
328 std::string sessionBasedModelsType;
329 if(sessionBasedModelsClientSocketSelection) {
330 sessionBasedModelsType = sessionBasedModelsClientSocketSelection->getValue();
331 if((sessionBasedModelsType != "SessionIdHighPart") && (sessionBasedModelsType != "SessionIdOptionalPart") && (sessionBasedModelsType != "RoundRobin")) {
332 throw anna::RuntimeException("Parameter 'sessionBasedModelsClientSocketSelection' only accepts 'SessionIdHighPart'/'SessionIdOptionalPart'/'RoundRobin' as parameter values", ANNA_FILE_LOCATION);
336 int retransmissions = retries ? retries->getIntegerValue() : 0;
337 if(retransmissions < 0) {
338 throw anna::RuntimeException("Parameter 'retries' must be non-negative", ANNA_FILE_LOCATION);
341 // Create new Node instance /////////////////////////////////////////////////////////////////
342 a_workingNode = new OriginHost(originHost->getValue(), applicationId, bpd);
343 MyDiameterEngine *commEngine = a_workingNode->getMyDiameterEngine();
344 /////////////////////////////////////////////////////////////////////////////////////////////
347 commEngine->setMaxConnectionDelay(tcpConnectDelayMs);
348 commEngine->setWatchdogPeriod(watchdogPeriodMs);
349 a_workingNode->setRequestRetransmissions(retransmissions);
351 // Realm information:
352 commEngine->setOriginHost(originHost->getValue());
353 if (originRealm) commEngine->setOriginRealm(originRealm->getValue());
357 int sessions = entityServerSessions ? entityServerSessions->getIntegerValue() : 1;
360 // Number of sessions:
361 commEngine->setNumberOfClientSessionsPerServer(sessions);
363 // Client CER and DWR
364 std::string cerPathfile = cer ? cer->getValue() : "";
365 std::string dwrPathfile = dwr ? dwr->getValue() : "";
366 commEngine->setClientCERandDWR(cerPathfile, dwrPathfile);
368 // Register one entity for this engine:
369 a_workingNode->createEntity(entity->getValue(), ceaTimeoutMs, answersTimeoutMs);
370 a_workingNode->getEntity()->setSessionBasedModelsType(sessionBasedModelsType);
371 a_workingNode->getEntity()->setBalance(balance ? (balance->getValue() == "yes") : false); // for sendings
372 if (eventOperation) a_workingNode->getEntity()->bind();
379 std::string ceaPathfile = cea ? cea->getValue() : "";
381 int sessions = diameterServerSessions ? diameterServerSessions->getIntegerValue() : 1;
382 a_workingNode->startDiameterServer(diameterServer->getValue(), sessions, allowedInactivityTimeMs, answersTimeoutMs, ceaPathfile);
386 if (!allLogsDisabled) {
387 std::string host = commEngine->getOriginHost();
388 std::string s_log = host + ".launcher.log"; if (log) s_log = log->getValue();
389 bool b_splitLog = (splitLog ? (splitLog->getValue() == "yes") : false);
390 bool b_detailedLog = (detailedLog ? (detailedLog->getValue() == "yes") : false);
391 bool b_dumpLog = (dumpLog ? (dumpLog->getValue() == "yes") : false);
392 std::string s_burstLog = host + ".launcher.burst"; if (burstLog) s_burstLog = burstLog->getValue();
393 a_workingNode->setLogs(s_log, b_splitLog, b_detailedLog, b_dumpLog, s_burstLog);
397 // Lazy initialization for comm engine:
398 if (eventOperation) commEngine->lazyInitialize();
400 // Node and Codec Engine registration ///////////////////////////////////////////////////////
401 a_originHosts[originHost->getValue()] = a_workingNode;
402 /////////////////////////////////////////////////////////////////////////////////////////////
406 if (!uniqueOriginHost())
407 a_workingNode = NULL; // by default, mode auto
409 // Diameter comm engines which are loaded after application start (via management operation 'services') are not really started,
410 // but this don't care because application startComponents() -> initialize() -> do_initialize() -> do nothing.
411 // And when stopped, running state is not checked and it will be stopped anyway.
415 void Launcher::loadServices(const std::string & xmlPathFile, bool eventOperation) throw(anna::RuntimeException) {
417 if (xmlPathFile == "null" || xmlPathFile == "") {
418 LOGWARNING(anna::Logger::warning("Ignoring services configuration on start: empty or 'null' string provided as xml file. Use management interface (operation 'services') in order to add services", ANNA_FILE_LOCATION));
423 std::string trace = "Loading ADML services file '";
424 trace += xmlPathFile;
426 anna::Logger::debug(trace, ANNA_FILE_LOCATION);
428 anna::xml::DocumentFile xmlDocument; // has private copy constructor defined but not implemented to avoid inhenrit/copy (is very heavy)
429 anna::xml::DTDMemory xmlDTD;
430 const anna::xml::Node *rootNode;
431 xmlDocument.initialize(xmlPathFile.c_str()); // fail here is i/o error
432 xmlDTD.initialize(ServicesDTD);
434 rootNode = xmlDocument.parse(xmlDTD); // Parsing: fail here if xml violates dtd
436 catch (anna::RuntimeException &ex) {
438 std::string msg = "Services DTD schema:\n\n";
440 anna::Logger::warning(msg, ANNA_FILE_LOCATION);
446 std::string trace = "Loaded XML file (";
447 trace += xmlPathFile;
449 trace += anna::xml::Compiler().apply(rootNode);
450 anna::Logger::debug(trace, ANNA_FILE_LOCATION);
452 servicesFromXML(rootNode, eventOperation);
456 anna::Millisecond Launcher::checkTimeMeasure(const std::string ¶meter, const std::string &value) throw(anna::RuntimeException) {
458 if(anna::functions::isLike("^[0-9]+$", value)) { // para incluir numeros decimales: ^[0-9]+(.[0-9]+)?$
460 std::istringstream ( value ) >> msecs;
462 if(msecs > a_timeEngine->getMaxTimeout()) { // 600000 ms
463 std::string msg = "Configuration value for '";
465 msg += "' ("; msg += value; msg += " msecs) is greater than allowed max timeout for timming engine: ";
466 msg += anna::functions::asString(a_timeEngine->getMaxTimeout());
467 throw RuntimeException(msg, ANNA_FILE_LOCATION);
471 std::string msg = "Configuration value for '";
473 msg += "' ("; msg += value; msg += " msecs) is perhaps very big (over 5 minutes).";
474 LOGWARNING(anna::Logger::warning(msg, ANNA_FILE_LOCATION));
477 if(msecs <= a_timeEngine->getResolution()) {
478 std::string msg = "Configuration value for '";
480 msg += "' ("; msg += value; msg += " msecs) as any other time measure, must be greater than timming engine resolution: ";
481 msg += anna::functions::asString(a_timeEngine->getResolution());
482 throw RuntimeException(msg, ANNA_FILE_LOCATION);
485 return (anna::Millisecond)msecs; // ok
488 // Non-integer exception:
489 std::string msg = "Configuration error for '";
493 msg += "': must be a non-negative integer number";
494 throw RuntimeException(msg, ANNA_FILE_LOCATION);
497 bool Launcher::setWorkingNode(const std::string &name) throw() {
500 origin_hosts_it nodeIt = a_originHosts.find(name);
501 if (nodeIt == a_originHosts.end()) {
503 std::string msg = "Unknown node with name '"; msg += name; msg += "'. Ignoring ...";
504 anna::Logger::warning(msg, ANNA_FILE_LOCATION);
508 a_workingNode = const_cast<OriginHost*>(nodeIt->second);
515 OriginHost *Launcher::getOriginHost(const std::string &oh) const throw(anna::RuntimeException) {
516 origin_hosts_it it = a_originHosts.find(oh);
517 if (it != a_originHosts.end()) return it->second;
518 throw anna::RuntimeException(anna::functions::asString("There is no origin host registered as '%s' (set Origin-Host avp correctly or force a specific host with 'node' operation)", oh.c_str()), ANNA_FILE_LOCATION);
521 OriginHost *Launcher::getOriginHost(const anna::diameter::codec::Message &message) const throw(anna::RuntimeException) {
522 std::string originHost = message.getAvp(anna::diameter::helpers::base::AVPID__Origin_Host)->getDiameterIdentity()->getValue();
523 return (getOriginHost(originHost));
526 void Launcher::updateOperatedOriginHostWithMessage(const anna::diameter::codec::Message &message) throw(anna::RuntimeException) {
527 if (!a_operatedHost) // priority for working node by mean 'node' operation
528 a_operatedHost = getOriginHost(message);
531 OriginHost *Launcher::getOperatedHost() const throw(anna::RuntimeException) {
533 throw anna::RuntimeException("Node not identified (try to force a specific Origin-Host with 'node' operation)", ANNA_FILE_LOCATION);
535 return a_operatedHost;
538 MyDiameterEntity *Launcher::getOperatedEntity() const throw(anna::RuntimeException) {
539 MyDiameterEntity *result = getOperatedHost()->getEntity();
541 throw anna::RuntimeException("No entity configured for the operated node", ANNA_FILE_LOCATION);
545 MyLocalServer *Launcher::getOperatedServer() const throw(anna::RuntimeException) {
546 MyLocalServer *result = getOperatedHost()->getDiameterServer();
548 throw anna::RuntimeException("No local server configured for the operated node", ANNA_FILE_LOCATION);
552 MyDiameterEngine *Launcher::getOperatedEngine() const throw(anna::RuntimeException) {
553 return getOperatedHost()->getMyDiameterEngine(); // never will be NULL
556 void Launcher::initialize()
557 throw(anna::RuntimeException) {
558 anna::comm::Application::initialize();
559 CommandLine& cl(anna::CommandLine::instantiate());
560 anna::comm::Communicator::WorkMode::_v workMode(anna::comm::Communicator::WorkMode::Single);
561 a_communicator = new MyCommunicator(workMode);
562 a_timeEngine = new anna::timex::Engine((anna::Millisecond)600000, a_admlMinResolution);
563 TestManager::instantiate().setTimerController(a_timeEngine);
565 // Counters record procedure:
566 const char *varname = "cntRecordPeriod";
567 anna::Millisecond cntRecordPeriod = (cl.exists(varname)) ? checkTimeMeasure(varname, cl.getValue(varname)) : (anna::Millisecond)300000;
568 if(cntRecordPeriod != 0) {
569 a_counterRecorderClock = new MyCounterRecorderClock("Counters record procedure clock", cntRecordPeriod); // clock
570 std::string cntDir = ".";
571 if(cl.exists("cntDir")) cntDir = cl.getValue("cntDir");
572 a_counterRecorder = new MyCounterRecorder(cntDir + anna::functions::asString("/Counters.Pid%d", (int)getPid()));
575 // Testing framework:
576 std::string tmDir = ".";
577 if(cl.exists("tmDir")) tmDir = cl.getValue("tmDir");
578 TestManager::instantiate().setReportsDirectory(tmDir);
581 if(cl.exists("trace"))
582 anna::Logger::setLevel(anna::Logger::asLevel(cl.getValue("trace")));
584 // Load launcher services:
585 loadServices(cl.getValue("services")); // before run (have components to be created)
589 throw(anna::RuntimeException) {
590 LOGMETHOD(anna::TraceMethod tm("Launcher", "run", ANNA_FILE_LOCATION));
591 CommandLine& cl(anna::CommandLine::instantiate());
592 anna::diameter::stack::Engine &stackEngine = anna::diameter::stack::Engine::instantiate();
595 a_start_time.setNow();
597 // Initial working directory:
599 if (getcwd(cwd, sizeof(cwd)) == NULL)
600 throw anna::RuntimeException("Cannot retrieve initial working directory !!", ANNA_FILE_LOCATION);
601 a_initialWorkingDirectory = cwd;
604 anna::statistics::Engine::instantiate().enable();
607 // Help on startup traces:
608 anna::Logger::information(help(), ANNA_FILE_LOCATION);
609 // Test messages dtd:
610 std::string msg = "\n ------------- TESTMESSAGES DTD -------------\n";
611 msg += anna::diameter::codec::MessageDTD;
612 anna::Logger::information(msg, ANNA_FILE_LOCATION);
616 if(cl.exists("httpServer")) {
617 anna::comm::Network& network = anna::comm::Network::instantiate();
620 anna::functions::getAddressAndPortFromSocketLiteral(cl.getValue("httpServer"), address, port);
621 //const anna::comm::Device* device = network.find(Device::asAddress(address)); // here provide IP
622 const anna::comm::Device* device = *((network.resolve(address)->device_begin())); // trick to solve
623 a_httpServerSocket = new anna::comm::ServerSocket(anna::comm::INetAddress(device, port), cl.exists("httpServerShared") /* shared bind */, &anna::http::Transport::getFactory());
626 ///////////////////////////////
627 // Diameter library COUNTERS //
628 ///////////////////////////////
629 anna::diameter::comm::OamModule & oamDiameterComm = anna::diameter::comm::OamModule::instantiate();
630 oamDiameterComm.initializeCounterScope(1); // 1000 - 1999
631 oamDiameterComm.enableCounters();
632 oamDiameterComm.enableAlarms();
633 anna::diameter::codec::OamModule & oamDiameterCodec = anna::diameter::codec::OamModule::instantiate();
634 oamDiameterCodec.initializeCounterScope(2); // 2000 - 2999
635 oamDiameterCodec.enableCounters();
636 oamDiameterCodec.enableAlarms();
641 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestReceived, "" /* get defaults for enum type*/, 0 /*1000*/);
642 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceived, "", 1 /*1001*/);
643 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestReceivedOnClientSession, "", 2 /*1002*/);
644 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceivedOnClientSession, "", 3 /*1003*/);
645 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestReceivedOnServerSession, "", 4 /* etc. */);
646 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceivedOnServerSession, "", 5);
647 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentOK, "", 6);
648 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentNOK, "", 7);
649 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerSentOK, "", 8);
650 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerSentNOK, "", 9);
651 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentOnClientSessionOK, "", 10);
652 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentOnClientSessionNOK, "", 11);
653 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerSentOnClientSessionOK, "", 12);
654 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerSentOnClientSessionNOK, "", 13);
655 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentOnServerSessionOK, "", 14);
656 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentOnServerSessionNOK, "", 15);
657 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerSentOnServerSessionOK, "", 16);
658 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerSentOnServerSessionNOK, "", 17);
659 /* Diameter Base (capabilities exchange & keep alive) */
661 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::CERSentOK, "", 18);
662 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::CERSentNOK, "", 19);
663 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::CEAReceived, "", 20);
664 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DWRSentOK, "", 21);
665 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DWRSentNOK, "", 22);
666 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DWAReceived, "", 23);
667 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DPRSentOK, "", 24);
668 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DPRSentNOK, "", 25);
669 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DPAReceived, "", 26);
671 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::CERReceived, "", 27);
672 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::CEASentOK, "", 28);
673 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::CEASentNOK, "", 29);
674 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DWRReceived, "", 30);
675 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DWASentOK, "", 31);
676 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DWASentNOK, "", 32);
677 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DPRReceived, "", 33);
678 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DPASentOK, "", 34);
679 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::DPASentNOK, "", 35);
680 /* server socket operations (enable/disable listening port for any local server) */
681 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::ServerSocketsOpened, "", 36);
682 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::ServerSocketsClosed, "", 37);
685 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::UnableToDeliverOverEntity, "", 38);
686 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::LostAvailabilityOverClientSession, "", 39);
687 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RecoveredAvailabilityOverClientSession, "", 40);
688 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::LostAvailabilityOverServer, "", 41);
689 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RecoveredAvailabilityOverServer, "", 42);
690 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::LostAvailabilityOverEntity, "", 43);
691 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RecoveredAvailabilityOverEntity, "", 44);
692 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::LostAvailabilityOverEngineForEntities, "", 45);
693 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RecoveredAvailabilityOverEngineForEntities, "", 46);
695 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::UnableToDeliverToClient, "", 47);
696 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::LostConnectionForServerSession, "", 48);
697 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::UnbindConnectionForServerSessionDueToInactivityTimeAnomaly, "", 49);
698 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::CreatedConnectionForServerSession, "", 50);
699 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::LostAvailabilityOverLocalServer, "", 51);
700 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RecoveredAvailabilityOverLocalServer, "", 52);
701 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::LostAvailabilityOverEngineForLocalServers, "", 53);
702 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RecoveredAvailabilityOverEngineForLocalServers, "", 54);
703 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentExpired, "", 55);
704 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentOnClientSessionExpired, "", 56);
705 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentOnServerSessionExpired, "", 57);
706 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestRetransmitted, "", 58);
707 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestRetransmittedOnClientSession, "", 59);
708 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestRetransmittedOnServerSession, "", 60);
709 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceivedUnknown, "", 61);
710 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceivedOnClientSessionUnknown, "", 62);
711 oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceivedOnServerSessionUnknown, "", 63);
716 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::AvpDecode__NotEnoughBytesToCoverAvpHeaderLength, "", 0 /*2000*/);
717 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::AvpDecode__IncoherenceBetweenActivatedVBitAndZeroedVendorIDValueReceived, "", 1 /*2001*/);
718 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::AvpDecode__IncorrectLength, "", 2 /*2002*/);
719 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::AvpDecode__DataPartInconsistence, "", 3 /*2003*/);
720 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::AvpDecode__UnknownAvpWithMandatoryBit, "", 4 /*2004*/);
721 /* Message decoding */
722 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::MessageDecode__NotEnoughBytesToCoverMessageHeaderLength, "", 5 /*2005*/);
723 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::MessageDecode__NotEnoughBytesToCoverMessageLength, "", 6 /*2006*/);
725 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::AvpValidation__EnumeratedAvpWithValueDoesNotComplyRestriction, "", 10 /*2010*/);
726 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::AvpValidation__AvpFlagsDoesNotFulfillTheDefinedFlagRules, "", 11 /*2011*/);
727 /* Message validation */
728 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::MessageValidation__UnknownOperationUnableToValidate, "", 12 /*2012*/);
729 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::MessageValidation__OperationHaveIncoherentFlags, "", 13 /*2013*/);
730 /* Level validation */
731 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::LevelValidation__MissingFixedRule, "", 14 /*2014*/);
732 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::LevelValidation__FailedRuleForCardinality, "", 15 /*2015*/);
733 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::LevelValidation__FailedRuleForCardinalityLessThanNeeded, "", 16 /*2016*/);
734 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::LevelValidation__FailedRuleForCardinalityMoreThanNeeded, "", 17 /*2017*/);
735 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::LevelValidation__FailedGenericAvpRuleForCardinalityFoundDisregardedItem, "", 18 /*2018*/);
736 oamDiameterCodec.registerCounter(anna::diameter::codec::OamModule::Counter::LevelValidation__FoundDisregardedItemsAndGenericAVPWasNotSpecified, "", 19 /*2019*/);
739 /////////////////////////////////
740 // Counter recorder associated //
741 /////////////////////////////////
742 if(a_counterRecorderClock) {
743 oamDiameterComm.setCounterRecorder(a_counterRecorder);
744 oamDiameterCodec.setCounterRecorder(a_counterRecorder);
745 anna::diameter::comm::ApplicationMessageOamModule::instantiate().setCounterRecorder(a_counterRecorder);
746 a_timeEngine->activate(a_counterRecorderClock); // start clock
749 /////////////////////////////
750 // Log statistics concepts //
751 /////////////////////////////
752 if(cl.exists("logStatisticSamples"))
753 logStatisticsSamples(cl.getValue("logStatisticSamples"));
755 // Start client connections //////////////////////////////////////////////////////////////////////////////////
756 MyDiameterEntity *entity;
757 for (origin_hosts_it it = a_originHosts.begin(); it != a_originHosts.end(); it++) {
758 entity = it->second->getEntity();
759 if (entity) entity->bind();
762 // Go into communicator poll
763 // Reconnection period (tcp reconnect retry time):
764 const char *varname = "reconnectionPeriod";
765 anna::Millisecond reconnectionPeriod = (cl.exists(varname)) ? checkTimeMeasure(varname, cl.getValue(varname)) : (anna::Millisecond)10000;
767 a_communicator->setRecoveryTime(reconnectionPeriod);
768 if(cl.exists("httpServer")) a_communicator->attach(a_httpServerSocket); // HTTP
769 a_communicator->accept();
773 bool Launcher::getDataBlockFromHexFile(const std::string &pathfile, anna::DataBlock &db) const throw() {
775 static char buffer[8192];
776 std::ifstream infile(pathfile.c_str(), std::ifstream::in);
778 if(infile.is_open()) {
780 std::string hexString(buffer, strlen(buffer));
781 // Allow colon separator in hex string: we have to remove them before processing with 'fromHexString':
782 hexString.erase(std::remove(hexString.begin(), hexString.end(), ':'), hexString.end());
784 std::string msg = "Hex string (remove colons if exists): ";
786 anna::Logger::debug(msg, ANNA_FILE_LOCATION);
788 anna::functions::fromHexString(hexString, db);
797 void Launcher::resetStatistics() throw() {
799 a_workingNode->getMyDiameterEngine()->resetStatistics();
802 for (origin_hosts_it it = a_originHosts.begin(); it != a_originHosts.end(); it++) {
803 it->second->getMyDiameterEngine()->resetStatistics();
808 void Launcher::resetCounters() throw() {
809 anna::diameter::comm::OamModule::instantiate().resetCounters();
810 anna::diameter::comm::ApplicationMessageOamModule::instantiate().resetCounters();
811 anna::diameter::codec::OamModule::instantiate().resetCounters();
814 void Launcher::signalUSR2() throw(anna::RuntimeException) {
816 std::string inputFile = getSignalUSR2InputFile();
817 std::string outputFile = getSignalUSR2OutputFile();
820 std::string msg = "Captured signal SIGUSR2. Reading tasks at '";
822 msg += "' (results will be written at '";
825 anna::Logger::notice(msg, ANNA_FILE_LOCATION);
830 std::string response_content;
831 std::ifstream in_file(inputFile);
832 std::ofstream out_file(outputFile);
834 if(!in_file.is_open()) throw RuntimeException("Unable to read tasks", ANNA_FILE_LOCATION);
835 if(!out_file.is_open()) throw RuntimeException("Unable to write tasks", ANNA_FILE_LOCATION);
837 while(getline(in_file, line)) {
839 // Ignore comments and blank lines:
840 if (line[0] == '#') continue;
841 if (std::string::npos == line.find_first_not_of(" \t")) continue;
844 std::string msg = "Processing line: ";
846 anna::Logger::debug(msg, ANNA_FILE_LOCATION);
850 eventOperation(line, response_content);
851 } catch(RuntimeException &ex) {
855 out_file << response_content << "\n";
863 std::string Launcher::help() const throw() {
864 std::string result = "\n";
865 result += "\n ------------- HELP -------------\n";
867 result += "\nOVERVIEW";
868 result += "\n--------";
870 result += "\nThe ADML (ANNA Diameter MultiHost Launcher) process is a multi-host node with client and server";
871 result += "\n capabilities as well as balancer (proxy) features. It could be used as diameter server (i.e. to";
872 result += "\n simulate PCRF nodes, OCS systems, etc.), as diameter client (GGSNs, DPIs, etc.), and balancer";
873 result += "\n systems to provide failover to external round-robin launchers. Also, auxiliary encoder/decoder/loader";
874 result += "\n function could be deployed to reinterpret certain external flow and send it to another process.";
876 result += "\nThe ANNA::diameter_comm built-in module provides a great set of characteristics as multiple connections";
877 result += "\n on both server and client side, definition for multiple-server entities (and not only two as standard";
878 result += "\n establish as minimum), separate statistics analyzer per each resource, automatic CER/CEA and DWR/DWA";
879 result += "\n generation, expiration control and many more features.";
881 result += "\nThe ADML process can easily configure a many origin-host nodes as needed, which will have own endpoints.";
882 result += "\nYou should avoid loop configurations (client and server for that client) because automatic forwarding,";
883 result += "\n is implemented and this would get in a never ending cycle when a request is sent.";
885 result += "\nProcess traces are dump on \"launcher.trace\" and could have any trace level (POSIX levels), usually";
886 result += "\n 'debug' or 'warning'. See ANNA documentation for more details.";
888 result += "\nAs any other ANNA process, context dump could be retrieved sending SIGUSR1 signal:";
889 result += "\n kill -10 <pid>";
891 result += "\n kill -s SIGUSR1 <pid>";
892 result += "\n and then";
893 result += "\n vi /var/tmp/anna.context.<pid>";
895 result += "\nA complete xml report will show all the context information (counters, alarms, statistics,";
896 result += "\n handlers, diameter stacks, etc.), and a powerful log module could dump all the events";
897 result += "\n processed and flow information. Statistics could be analized at context dump and optionally";
898 result += "\n written to disk as sample files (useful for graphs and spreadsheet reports) with all the";
899 result += "\n measurements.";
901 result += "\nAlso SIGUSR2 is handled for management purposes. We will talk later about this.";
904 result += "\nCOMMAND LINE";
905 result += "\n------------";
907 result += "\nStart the launcher process without arguments in order to see all the startup configuration";
908 result += "\n posibilities, many of which could be modified on the air through the management interface";
909 result += "\n (we will talk later about this great feature). There is only one mandatory parameter which";
910 result += "\n is the services definition: --services <services xml file>. You must follow the dtd schema";
911 result += "\n to build a valid services xml file. Some basic examples are:";
913 result += "\nClient configuration:";
915 result += "\n<services>";
916 result += "\n <!-- Stacks -->";
917 result += "\n <stack id=\"0\" dictionary=\"dictionary.xml\"/>";
919 result += "\n <!-- Nodes -->";
920 result += "\n <node originHost=\"ADML-client\" applicationId=\"0\" entity=\"localhost:3868\"/>";
921 result += "\n</services>";
923 result += "\nServer configuration:";
925 result += "\n<services>";
926 result += "\n <!-- Stacks -->";
927 result += "\n <stack id=\"0\" dictionary=\"dictionary.xml\"/>";
929 result += "\n <!-- Nodes -->";
930 result += "\n <node originHost=\"ADML-server\" applicationId=\"0\" diameterServer=\"localhost:3868\"/>";
931 result += "\n</services>";
933 result += "\nIf you act as a proxy or a translation agent, you need to combine both former setups, and probably";
934 result += "\n will need to program the answers to be replied through the operations interface. To balance the";
935 result += "\n traffic at your client side you shall use '--balance' and '--sessionBasedModelsClientSocketSelection'";
936 result += "\n arguments in order to define the balancing behaviour. To make hybrid setups you only must mix the nodes:";
938 result += "\nClient and server configuration:";
940 result += "\n<services>";
941 result += "\n <!-- Stacks -->";
942 result += "\n <stack id=\"16777236\" dictionary=\"dictionary_Rx.xml\"/>";
943 result += "\n <stack id=\"16777238\" dictionary=\"dictionary_Gx.xml\"/>";
944 result += "\n <stack id=\"0\" dictionary=\"dictionary_base.xml\"/>";
946 result += "\n <!-- Nodes -->";
947 result += "\n <node originHost=\"ADML-Rx-client\" applicationId=\"16777236\" entity=\"localhost:3868\" cer=\"cer_Rx.xml\"/>";
948 result += "\n <node originHost=\"ADML-Gx-client\" applicationId=\"16777238\" entity=\"localhost:3868\" cer=\"cer_Gx.xml\"/>";
949 result += "\n</services>";
952 result += "\nThe process builds automatically CER and DWR messages as a client, but you could specify your own";
953 result += "\n as shown in the hybrid former example. Note that the base protocol stack must be registered because";
954 result += "\n the configuration corresponds to a multistack process which change the stack using the application-id";
955 result += "\n processed (0 in the case of base protocol messages: CER, CEA, DWR, DWA, DPR, DPA).";
957 result += "\nDYNAMIC OPERATIONS";
958 result += "\n------------------";
960 result += "\nADML supports several operations which could be reconized via HTTP interface or SIGUSR2 caugh.";
961 result += "\nAn operation is specified by mean a string containing the operation name and needed arguments";
962 result += "\n separated by pipes. These are the available commands:";
964 result += "\n--------------------------------------------------------------------------------------- General purpose";
966 result += "\nhelp This help.";
968 result += "\n--------------------------------------------------------------------------------------- Node management";
970 result += "\nnode[|<name>] Selects a context working node by mean a registered name (origin-host).";
971 result += "\n All the subsequent operations will be forced to work with";
972 result += "\n this node, which makes possible some rare scenarios like";
973 result += "\n sending unexpected messages on remote peers. This is also";
974 result += "\n useful for some operations in order to restrict the scope";
975 result += "\n of action (statistics, communication visibility, etc.).";
976 result += "\n Empty parameter will show the current configuration.";
978 result += "\nnode_auto Returns to the default behaviour (smart node selection).";
979 result += "\n Depending on the operation, this could imply a global";
980 result += "\n action scope, affecting to all the registered hosts.";
981 result += "\n This should be the normal configuration. Take into";
982 result += "\n account that if you fix the working node, this could";
983 result += "\n affect to things like test programming: communication";
984 result += "\n resources will override those which would be inferred";
985 result += "\n from programmed messages Origin-Host avps.";
987 result += "\n------------------------------------------------------------------------------------ Parsing operations";
989 result += "\ncode|<source_file>|<target_file> Encodes source file (pathfile) into target file (pathfile).";
990 result += "\ndecode|<source_file>|<target_file> Decodes source file (pathfile) into target file (pathfile).";
991 result += "\nloadxml|<source_file> Reinterpret xml source file (pathfile).";
993 result += "\n------------------------------------------------------------------------------------------- Hot changes";
995 result += "\nservices[|source file] Adds and starts the services specified in the xml file provided.";
996 result += "\n (if missing, the file 'services.xml' will be used). This is used";
997 result += "\n to load new nodes once the ADML is started, regardless if command";
998 result += "\n line '--services' parameter was used or not. Those services which";
999 result += "\n are not correctly loaded will be ignored to keep the process alive.";
1000 result += "\n If you need to load services as deltas, you must firstly load the";
1001 result += "\n diameter base dictionary with stack id 0, because all the nodes";
1002 result += "\n will use this dictionary to encode/decode base protocol messages";
1003 result += "\n managed by the communication engine.";
1005 result += "\ndiameterServerSessions|<integer> Updates the maximum number of accepted connections to diameter";
1006 result += "\n server socket.";
1007 result += "\ncontext[|target file] Application context could also be written by mean this operation,";
1008 result += "\n and not only through SIGUSR1. If optional path file is missing,";
1009 result += "\n default '/var/tmp/anna.context.<pid>' will be used.";
1010 result += "\ncollect Reset statistics and counters to start a new test stage of";
1011 result += "\n performance measurement. Context data can be written at";
1012 result += "\n '/var/tmp/anna.context.<pid>' by mean 'kill -10 <pid>'.";
1013 result += "\n or sending operation 'context|[target file]'.";
1014 result += "\n This operation applies over all the registered host nodes";
1015 result += "\n except if one specific working node has been set.";
1016 result += "\nforceCountersRecord Forces dump to file the current counters of the process.";
1017 result += "\nlog-statistics-samples|<list> Log statistics samples for the provided comma-separated concept id";
1018 result += "\n list, over './sample.<concept id>.csv' files. For example: \"1,2\"";
1019 result += "\n will log concepts 1 and 2. Reserved words \"all\"/\"none\" activates/";
1020 result += "\n deactivates all registered statistics concept identifiers. That ids";
1021 result += "\n are shown at context dump.";
1022 result += "\nchange-dir[|directory] Changes the execution point which could be fine to ease some";
1023 result += "\n file system interaction tasks. Be care about some requirements";
1024 result += "\n (for example if you have a user defined counters directory as";
1025 result += "\n relative path this must exists from the new execution directory).";
1026 result += "\n If nothing provided, initial working directory will be restored.";
1027 result += "\nshow-oam Dumps current counters of the process. This is also done at";
1028 result += "\n process context dump.";
1029 result += "\nshow-stats Dumps statistics of the process. This is also done at process";
1030 result += "\n context dump.";
1032 result += "\n<visibility action>[|<address>:<port>][|socket id]";
1034 result += "\n Actions: hide, show (update state) and hidden, shown (query state).";
1035 result += "\n Acts over a client session for messages delivery (except CER/A, DWR/A, DPR/A).";
1036 result += "\n If missing server (first parameter) all applications sockets will be affected.";
1037 result += "\n If missing socket (second parameter) for specific server, all its sockets will be affected.";
1039 result += "\n All application client sessions are shown on startup, but standard delivery only use primary";
1040 result += "\n server ones except if fails. Balance configuration use all the allowed sockets. You could also";
1041 result += "\n use command line 'sessionBasedModelsClientSocketSelection' to force traffic flow over certain";
1042 result += "\n client sessions, but for this, hide/show feature seems easier.";
1044 result += "\n--------------------------------------------------------------------------------------- Flow operations";
1046 result += "\nsendxml2e|<source_file> Sends xml source file (pathfile) through configured entity.";
1047 result += "\nsendxml2c|<source_file> Sends xml source file (pathfile) to client.";
1048 result += "\nanswerxml2e[|source_file] Answer xml source file (pathfile) for incoming request with same code from entity.";
1049 result += "\n The answer is stored in a FIFO queue for a specific message code, then there are";
1050 result += "\n as many queues as different message codes have been programmed.";
1051 result += "\nanswerxml2c[|source_file] Answer xml source file (pathfile) for incoming request with same code from client.";
1052 result += "\n The answer is stored in a FIFO queue for a specific message code, then there are";
1053 result += "\n as many queues as different message codes have been programmed.";
1054 result += "\nanswerxml<2e/2c> List programmed answers (to entity/client) if no parameter provided.";
1055 result += "\nanswerxml<2e/2c>|dump Write programmed answers (to entity/client) to file 'programmed_answer.<message code>.<sequence>',";
1056 result += "\n where 'sequence' is the order of the answer in each FIFO code-queue of programmed answers.";
1057 result += "\nanswerxml<2e/2c>|clear Clear programmed answers (to entity/client).";
1058 result += "\nanswerxml<2e/2c>|exhaust Disable the corresponding queue rotation, which is the default behaviour.";
1059 result += "\nanswerxml<2e/2c>|rotate Enable the corresponding queue rotation, useful in performance tests.";
1060 result += "\n Rotation consists in add again to the queue, each element retrieved for answering.";
1062 result += "\nSend operations are available using hexadecimal content (hex formatted files) which also allow to test";
1063 result += "\nspecial scenarios (protocol errors):";
1065 result += "\nsendhex2e|<source_file> Sends hex source file (pathfile) through configured entity.";
1066 result += "\nsendhex2c|<source_file> Sends hex source file (pathfile) to client.";
1068 result += "\nAnswer programming in hexadecimal is not really neccessary (you could use send primitives) and also";
1069 result += "\n is intended to be used with decoded messages in order to replace things like hop by hop, end to end,";
1070 result += "\n subscriber id, session id, etc. Anyway you could use 'decode' operation and then program the xml created.";
1072 result += "\nIf a request is received, answer map (built with 'answerxml<2e/2c>' operations) will be";
1073 result += "\n checked to find a corresponding programmed answer to be replied(*). If no ocurrence is found,";
1074 result += "\n or answer message was received, the message is forwarded to the other side (entity or client),";
1075 result += "\n or nothing but trace when no peer at that side is configured. Answer to client have sense when";
1076 result += "\n diameter server socket is configured, answer to entity have sense when entity does.";
1078 result += "\nIn the most complete situation (process with both client and server side) there are internally";
1079 result += "\n two maps with N FIFO queues, one for each different message code within programmed answers.";
1080 result += "\nOne map is for answers towards the client, and the other is to react entity requests. Then in";
1081 result += "\n each one we could program different answers corresponding to different request codes received.";
1083 result += "\n(*) sequence values (hop-by-hop and end-to-end), Session-Id and Subscription-Id avps, are mirrored";
1084 result += "\n to the peer which sent the request. If user wants to test a specific answer without changing it,";
1085 result += "\n use sendxml<2e/2c>/sendhex<2e/2c> operations better than programming.";
1087 result += "\nBalance ('--balance' command line parameter) could be used to forward server socket receptions through";
1088 result += "\n entity servers by mean a round-robin algorithm. Both diameter server socket and entity targets should";
1089 result += "\n have been configured, that is to say: launcher acts as client and server. If no balance is used, an";
1090 result += "\n standard delivery is performed: first primary entity server, secondary when fails, etc.";
1092 result += "\n--------------------------------------------------------------------------- Processing types (log tags)";
1094 result += "\nUsed as log file extensions (when '--splitLog' is provided on command line) and context preffixes on log";
1095 result += "\n details when unique log file is dumped:";
1097 result += "\n [sent2e/send2eError] Send to entity (success/error)";
1098 result += "\n [sent2c/send2cError] Send to client (success/error)";
1099 result += "\n [fwd2e/fwd2eError] Forward to entity a reception from client (success/error)";
1100 result += "\n [fwd2c/fwd2cError] Forward to client a reception from entity (success/error)";
1101 result += "\n [recvfc] Reception from client";
1102 result += "\n [recvfe] Reception from entity";
1103 result += "\n [req2c-expired] A request sent to client has been expired";
1104 result += "\n [req2e-expired] A request sent to entity has been expired";
1105 result += "\n [recvfc-ans-unknown] Reception from client of an unknown answer (probably former [req2c-expired]";
1106 result += "\n has been logged)";
1107 result += "\n [recvfe-ans-unknown] Reception from entity of an unknown answer (probably former [req2e-expired]";
1108 result += "\n has been logged)";
1109 result += "\n [retry] Request retransmission";
1111 result += "\n------------------------------------------------------------------------------------------- Burst tests";
1113 result += "\nIn order to simplify user experience, burst category operations are only allowed in single host node";
1114 result += "\n configuration. Indeed, you could send messages with unmatched Origin-Host, and no warning is shown.";
1115 result += "\nAll the operations are performed through the unique host: if you need to use more interfaces, you may";
1116 result += "\n launch different ADML instances. Is nonsense to allow burst in a multi-host configured ADML, because";
1117 result += "\n this feature is not able to coordinate the messages.";
1119 result += "\nburst|<action>[|parameter] Used for performance testing, we first program diameter requests";
1120 result += "\n messages in order to launch them from client side to the configured";
1121 result += "\n diameter entity. We could start the burst with an initial load";
1122 result += "\n (non-asynchronous sending), after this, a new request will be sent";
1123 result += "\n per answer received or expired context. There are 10 actions: clear,";
1124 result += "\n load, start, push, pop, stop, repeat, send, goto and look.";
1126 result += "\n burst|clear Clears all loaded burst messages.";
1127 result += "\n burst|load|<source_file> Loads the next diameter message into launcher burst.";
1128 result += "\n burst|start|<initial load> Starts (or restarts if already in progress) the message sending with";
1129 result += "\n a certain initial load.";
1130 result += "\n burst|push|<load amount> Sends specific non-aynchronous load.";
1131 result += "\n burst|pop|<release amount> Skip send burst messages in order to reduce over-the-air requests.";
1132 result += "\n Popping all OTA requests implies burst stop because no more answer";
1133 result += "\n will arrive to the process. Burst output file (--burstLog command";
1134 result += "\n line parameter) shows popped messages with crosses (x). Each cross";
1135 result += "\n represents one received answer for which no new request is sent.";
1136 result += "\n burst|stop Stops the burst cycle. You can resume pushing 1 load amount.";
1137 result += "\n burst|repeat[|[yes]|no] Restarts the burst launch when finish. If initial load or push load";
1138 result += "\n amount is greater than burst list size, they will be limited when";
1139 result += "\n the list is processed except when repeat mode is enabled.";
1140 result += "\n burst|send|<amount> Sends messages from burst list. The main difference with start/push";
1141 result += "\n operations is that burst won't be awaken. Externally we could control";
1142 result += "\n sending time (no request will be sent for answers).";
1143 result += "\n burst|goto|<order> Updates current burst pointer position.";
1144 result += "\n burst|look[|order] Show programmed burst message for order provided, current when missing.";
1146 result += "\n-------------------------------------------------------------------------------------- Advanced testing";
1148 result += "\n Burst mode only allows single interface interaction. For multiple interface";
1149 result += "\n (origin-host) coordination, you could use the advanced test cases programming:";
1152 result += "\n test|<id>|<command>[|parameters]";
1154 result += "\n Adds a new step to the test case with provided identifier. If provided identifier";
1155 result += "\n is not registered yet, a new test case will be created with that value and the";
1156 result += "\n step will be added as the first. For a specific 'id', the steps are stored in";
1157 result += "\n order as they are programmed. Check possible runtime exceptions when adding a";
1158 result += "\n new step because those which fail, will be ignored/skipped during test case";
1159 result += "\n programming giving an incomplete sequence invalid for the testing purpose.";
1161 result += "\n <id>: integer number, normally monotonically increased for each test case. Some external";
1162 result += "\n script/procedure shall clone a test case template in order to build a collection";
1163 result += "\n of independent and coherent test cases (normally same type) with different context";
1164 result += "\n values (Session-Id, Subscriber-Id, etc.).";
1166 result += "\n <command>: commands to be executed for the test id provided. Each command programmed";
1167 result += "\n constitutes a test case 'step', numbered from 1 to N.";
1169 result += "\n timeout|<msecs> Sets an asynchronous timer to restrict the maximum timeout";
1170 result += "\n until last test step. Normally, this command is invoked";
1171 result += "\n in the first step, anyway it measures the time from the";
1172 result += "\n execution point whatever it is. The expiration will abort";
1173 result += "\n the test if still running. One or more timeouts could be";
1174 result += "\n programmed (not usual), but the more restrict will apply.";
1175 result += "\n It is highly recommended to program a initial timeout step,";
1176 result += "\n or the test case could be eternally in-progress.";
1178 result += "\n sendxml2e|<source_file>[|<step number>]";
1179 result += "\n Sends xml source file (pathfile) to entity (it would be a";
1180 result += "\n 'forward' event if it came through local server endpoint).";
1181 result += "\n Take into account that the xml message is encoded just on";
1182 result += "\n call. The xml file is not longer needed neither interpreted";
1183 result += "\n in case of modification, after calling this command.";
1184 result += "\n The step number should be provided for answers to indicate";
1185 result += "\n the 'wait for request' corresponding step. If you miss this";
1186 result += "\n reference, the sequence information (hop-by-hop, end-to-end)";
1187 result += "\n will be sent as they are in the answer xml message (realize";
1188 result += "\n the difficulty of predicting these information). Be sure to";
1189 result += "\n refer to a 'wait for request' step. Conditions like 'regexp'";
1190 result += "\n (as we will see later) are not verified.";
1191 result += "\n In the case of requests, the step number is used to force the";
1192 result += "\n copy of Session-Id value from the referred step.";
1194 result += "\n sendxml2c|<source_file>[|<step number>]";
1195 result += "\n Sends xml source file (pathfile) to client (it would be a";
1196 result += "\n 'forward' event if it came through remote server endpoint).";
1197 result += "\n Same commented for 'sendxml2e' regarding the step number.";
1199 result += "\n delay|<msecs> Blocking step until the time lapse expires. Useful to give ";
1200 result += "\n some cadence control and time schedule for a specific case.";
1201 result += "\n A value of 0 could be used as a dummy step.";
1202 result += "\n wait<fe/fc>|<condition> Blocking step until condition is fulfilled. The message could";
1203 result += "\n received from entity (waitfe) or from client (waitfc).";
1205 result += "\n wait<fe/fc>-regexp|<regexp>";
1206 result += "\n Wait condition, from entity (waitfe-regexp) or client (waitfc-regexp)";
1207 result += "\n to match the serialized xml content for received messages. CPU cost";
1208 result += "\n is bigger than the former ones because the whole message must be";
1209 result += "\n decoded and converted to xml instead of doing a direct hexadecimal";
1210 result += "\n buffer search. The main advantage is the great flexibility to identify";
1211 result += "\n any content with a regular expression.";
1213 result += "\n sh-command|<script> External execution for script/executable via shell through a dedicated";
1214 result += "\n thread, providing the command and parameters. You could use dynamic";
1215 result += "\n variables ##<tag> to have more flexibility:";
1216 result += "\n Test pool cycle id: "; result += SH_COMMAND_TAG_FOR_REPLACE__CYCLE_ID;
1217 result += "\n Test case id: "; result += SH_COMMAND_TAG_FOR_REPLACE__TESTCASE_ID;
1218 result += "\n Test step id: "; result += SH_COMMAND_TAG_FOR_REPLACE__TESTSTEP_ID;
1220 result += "\n For example, your command could be something like this:";
1221 result += "\n insert_sql_"; result += SH_COMMAND_TAG_FOR_REPLACE__TESTCASE_ID; result += ".sh -db dbname --verbose";
1222 result += "\n > /tmp/cycle-"; result += SH_COMMAND_TAG_FOR_REPLACE__CYCLE_ID;
1223 result += ".testcase-"; result += SH_COMMAND_TAG_FOR_REPLACE__TESTCASE_ID;
1224 result += ".teststep-"; result += SH_COMMAND_TAG_FOR_REPLACE__TESTSTEP_ID;
1226 result += "\n Try to redirect stdout and stderr to avoid ADML output contamination";
1227 result += "\n with the possible outputs from the scripts. You could also put your";
1228 result += "\n job in background although sh-command will return 0-value immediately.";
1230 result += "\n <condition>: Optional parameters which must be fulfilled to continue through the next step.";
1231 result += "\n Any received message over diameter interfaces will be evaluated against the";
1232 result += "\n corresponding test case starting from the current step until the first one";
1233 result += "\n whose condition is fulfilled. If no condition is fulfilled the event will be";
1234 result += "\n classified as 'uncovered' (normally a test case bad configuration, or perhaps";
1235 result += "\n a real unexpected message).";
1238 // result += "\n The way to identify the test case, is through registered Session-Id values for";
1239 // result += "\n programmed requests. But this depends on the type of node. Acting as clients,";
1240 // result += "\n requests received have Session-Id values which are already registered with";
1241 // result += "\n one test case, causing an error if not found. Acting as servers, requests are";
1242 // result += "\n received over a diameter local server from a client which are generating that";
1243 // result += "\n Session-Id values. Then we know nothing about such values. The procedure in";
1244 // result += "\n this case is find out a test case not-started containing a condition which";
1245 // result += "\n comply with the incoming message, and reactivates it.";
1246 // The other solution: register Session-Id values for answers send to client from a local diameter server.
1248 result += "\n How to answer: a wait condition for a request will store the incoming message";
1249 result += "\n which fulfills that condition. This message is useful together with the peer";
1250 result += "\n connection source in a further send step configured with the corresponding";
1251 result += "\n response. You could also insert a delay between wait and send steps to be";
1252 result += "\n more realistic (processing time simulation in a specific ADML host node).";
1253 result += "\n Always, a response send step will get the needed information from the most";
1254 result += "\n recent wait step finding in reverse order (note that some race conditions";
1255 result += "\n could happen if your condition is not specific enough).";
1258 result += "\n Condition format:";
1260 result += "\n [code]|[bitR]|[hopByHop]|[applicationId]|[sessionId]|[resultCode]|[msisdn]|[imsi]|[serviceContextId]";
1262 result += "\n code: integer number";
1263 result += "\n bitR: 1 (request), 0 (answer)";
1264 result += "\n hopByHop: integer number or request send step reference: #<step number>";
1266 result += "\n Using the hash reference, you would indicate a specific wait condition";
1267 result += "\n for answers. The step number provided must correspond to any of the";
1268 result += "\n previous send commands (sendxml2e/sendxml2c) configured for a request.";
1269 result += "\n This 'hop-by-hop' variant eases the wait condition for answers in the";
1270 result += "\n safest way.";
1272 result += "\n applicationId: integer number";
1273 result += "\n sessionId: string";
1274 result += "\n resultCode: integer number";
1275 result += "\n msisdn: string";
1276 result += "\n imsi: string";
1277 result += "\n serviceContextId: string";
1279 result += "\n Take into account these rules, useful in general:";
1281 result += "\n - Be as much specific as possible defining conditions to avoid ambiguity sending";
1282 result += "\n messages out of context due to race conditions. Although you could program several";
1283 result += "\n times similar conditions, some risky practices will throw a warning trace (if you";
1284 result += "\n repeat the same condition within the same test case).";
1285 result += "\n - Adding a ResultCode and/or HopByHop to the condition are only valid waiting answers.";
1286 result += "\n - Requests hop-by-hop values must be different for all the test case requests.";
1287 result += "\n RFC says that a hop by hop must be unique for a specific connection, something that";
1288 result += "\n could be difficult to manage if we have multiple available connections from client";
1289 result += "\n side endpoint (entity or local server), even if we would have only one connection but";
1290 result += "\n several host interfaces. It is enough to configure different hop-by-hop values within";
1291 result += "\n each test case, because on reception, the Session-Id is used to identify that test case.";
1296 result += "\n Programming example:";
1298 result += "\n Basic Rx/Gx scenary: PCEF (Gx) - PCRF - AF (Rx)";
1300 result += "\n test|1|timeout|5000 (step 1: whole time requirement is 5 seconds)";
1301 result += "\n test|1|sendxml2e|CCR-I.xml (step 2: imagine this xml uses the Session-Id 'SGx')";
1302 result += "\n test|1|waitfe|272|0|||SGx|2001 (step 3: waits the CCA for the CCR-I with Result-Code = DIAMETER_SUCCESS)";
1303 result += "\n test|1|sendxml2e|AAR-flows.xml (step 4: imagine this xml uses the Session-Id 'SRx')";
1304 result += "\n test|1|waitfe|265|0|||SRx|2001 (step 5: waits the AAA for the AAR-flows with Result-Code = DIAMETER_SUCCESS)";
1305 result += "\n test|1|waitfe|258|1|||SGx (step 6: waits the RAR (install policies) from the PCRF server)";
1306 result += "\n test|1|sendxml2e|RAA-install.xml|6 (step 7: sends the response for the RAR)";
1307 result += "\n test|1|sendxml2e|CCR-T.xml (step 8: termination of the Gx session, imagine this xml puts hop-by-hop 'H1')";
1308 result += "\n test|1|waitfe|272|0|H1||SGx|2001 (step 9: waits the CCA for the CCR-T with Result-Code = DIAMETER_SUCCESS and hop-by-hop 'H1')";
1309 result += "\n test|1|waitfe|258|1|||SGx (step 10: waits the RAR (remove policies) from the PCRF server)";
1310 result += "\n test|1|sendxml2e|RAA-remove.xml|10 (step 11: sends the response for the RAR)";
1312 result += "\n Notes: We added an additional condition in step 9: the hop-by-hop. When we program the corresponding";
1313 result += "\n source request (CCR-T), we configured the value 'H1' for the hop-by-hop. This is an 'application";
1314 result += "\n value' because the real hop-by-hop transported through the client connection is managed by the";
1315 result += "\n diameter stack. But when returned, the transaction pool resolve the original value. This feature";
1316 result += "\n is necessary to ease the implementation of certain diameter agents (proxies for example). In our";
1317 result += "\n case, we could format the hop-by-hop values within the request templates with total freedom to";
1318 result += "\n improve the programmed conditions.";
1320 result += "\n In the case of 'waiting for requests' is not such easy. Indeed, steps 6 and 10 will write a warning";
1321 result += "\n because they are the same condition. We know that we are not going to have any problem because";
1322 result += "\n such events are blocking-protected regarding logic-dependent messages (CCR-T), and race condition";
1323 result += "\n is absolutely strange in this case.";
1325 result += "\n You could speed up the test case moving forward steps like 3 & 5, understood as non-strict requirements";
1326 result += "\n to continue testing. Anyway, remember that test cases should be as real as possible, and that there";
1327 result += "\n are many ways to increase the load rate as we will see in next section (test cases execution).";
1329 result += "\n Other simplifications: the steps 3, 5 and 9 can be replaced by";
1331 result += "\n test|1|waitfe||0|#2";
1332 result += "\n test|1|waitfe||0|#4";
1333 result += "\n test|1|waitfe||0|#8";
1335 result += "\n which means that hop-by-hop must be retrieved from steps 2, 4 and 8 respectively,";
1336 result += "\n and the expected message shall be an answer. Normally you will add other conditions,";
1337 result += "\n for example a DIAMETER_SUCCESS result (adding 2001 as Result-Code).";
1339 result += "\nTest cases execution:";
1342 result += "\n test|ttps|<amount> Starts/resume the provided number of test ticks per second (ttps). The ADML starts";
1343 result += "\n with the event trigger system suspended, and this operation is neccessary to begin";
1344 result += "\n those cases which need this time event (internal triggering). Some other test cases";
1345 result += "\n could be started through external events (first test case event could be programmed";
1346 result += "\n to wait specific message), but is not usual this external mode and neither usual to";
1347 result += "\n mix triggering types. Normally, you will pause/stop new test launchs providing 0 as";
1348 result += "\n ttps value, and also you could dynamically modify the load rate updating that value.";
1349 result += "\n If a test case has N messages then 'ttps * N' will be the virtual number of messages";
1350 result += "\n managed per second when no bottleneck exists.";
1352 result += "\n Provide 0 in order to stop the timer triggering.";
1354 result += "\n The timer manager resolution currently harcoded allows a maximum of ";
1355 result += anna::functions::asString(1000/a_admlMinResolution); result += " events";
1356 result += "\n per second. To reach greater rates ADML will join synchronously the needed number of";
1357 result += "\n new time-triggered test cases per a single event, writting a warning-level trace to";
1358 result += "\n advice about the risk of burst sendings and recommend launching multiple instances";
1359 result += "\n to achieve such load with a lower rate per instance.";
1361 result += "\n test|next[|<sync-amount>] Forces the execution of the next test case(s) without waiting for test manager tick.";
1362 result += "\n Provide an integer value for 'sync-amount' to send a burst synchronous amount of the";
1363 result += "\n next programmed test cases (1 by default). This event works regardless the timer tick";
1364 result += "\n function, but it is normally used with the test manager tick stopped.";
1366 result += "\n test|ip-limit[|amount] In-progress limit of test cases. No new test cases will be launched over this value";
1367 result += "\n (test Manager tick work will be ignored). Zero-value is equivalent to stop the clock.";
1368 result += "\n tick, -1 is used to specify 'no limit' which is the default. If missing amount, the";
1369 result += "\n limit and current amount of in-progress test cases will be shown.";
1371 result += "\n test|goto|<id> Updates current test pointer position.";
1373 result += "\n test|look[|id] Show programmed test case for id provided, current 'in-process' test case when missing.";
1374 result += "\n Test cases reports are not dumped on process context (too many information in general).";
1375 result += "\n The report contains context information in every moment: this operation acts as a snapshot.";
1377 result += "\n test|interact|amount|id Makes interactive a specific test case id. The amount is the margin of execution steps";
1378 result += "\n to be done. Normally, we will execute 'test|interact|0|<test case id>', which means that";
1379 result += "\n the test case is selected to be interactive, but no step is executed. Then you have to";
1380 result += "\n interact with positive amounts (usually 1), executing the provided number of steps if";
1381 result += "\n they are ready and fulfill the needed conditions. The value of 0, implies no execution";
1382 result += "\n steps margin, which could be useful to 'freeze' a test in the middle of its execution.";
1383 result += "\n You could also provide -1 to make it non-interactive resuming it from the current step.";
1385 result += "\n test|reset|<[soft]/hard>[|id] Reset the test case for id provided, all the tests when missing. It could be hard/soft:";
1386 result += "\n - hard: you probably may need to stop the load rate before. This operation initializes";
1387 result += "\n all test cases regardless their states.";
1388 result += "\n - soft: only for finished cases (those with 'Success' or 'Failed' states). It does not";
1389 result += "\n affect to test cases with 'InProgress' state.";
1391 result += "\n test|repeats|<amount> Restarts the whole programmed test list when finished the amount number of times (repeats";
1392 result += "\n forever if value -1 is provided). This is disabled by default (amount = 0): testing trigger";
1393 result += "\n system will enter suspended state until new ttps operation is received and a soft reset has";
1394 result += "\n been done before. Test cases state & data will be reset (when achieved again), but general";
1395 result += "\n statistics and counters will continue measuring until reset with 'collect' operation.";
1397 result += "\n test|clear Clears all the programmed test cases and stop testing (if in progress).";
1399 result += "\n test|summary Test manager general report (number of test cases, counts by state, global configuration,";
1400 result += "\n forced in-progress limitation, reports visibility, etc.). Be careful when you have reports";
1401 result += "\n enabled because the programmed test cases dumps could be heavy (anyway you could enable the";
1402 result += "\n dumps separately, for any of the possible states: Initialized, InProgress, Failed, Success).";
1404 result += "\n test|report|<initialized/in-progress/failed/success/[all]/none>[|[yes]|no]";
1406 result += "\n Enables/disables report generation for a certain test case state: initialized, in-progress,";
1407 result += "\n failed or success (also 'all' and 'none' reserved words could be used). This applies to report";
1408 result += "\n summary (former described operation) and automatic dumps during testing where only failed or";
1409 result += "\n successful states will appear: every time a test case is finished its xml representation will";
1410 result += "\n be dump on a file under the execution directory (or the one configured in process command-line";
1411 result += "\n 'tmDir') with the name:";
1413 result += "\n 'cycle-<cycle id>.testcase-<test case id>.xml'.";
1415 result += "\n By default, all the states are disabled to avoid IO overload. In most of cases not all the";
1416 result += "\n tests are going to fail then you could enable only such failed dumps. Anyway you could set";
1417 result += "\n the reports visibility to fit your needs in a given situation.";
1419 result += "\n test|report-hex[|[yes]|no] Reports could include the diameter messages in hexadecimal format. Disabled by default.";
1422 result += "\n------------------------------------------------------------------------------------- Dynamic procedure";
1424 result += "\ndynamic[|args] This launch an internal operation implemented in 'Procedure' class.";
1425 result += "\n Its default implementation does nothing, but you could create a dynamic";
1426 result += "\n library 'libanna_launcherDynamic.so' and replace the one in this project.";
1427 result += "\n One interesting application consists in the use of the diameter API and";
1428 result += "\n event operation to create a set of libraries as the testing framework.";
1429 result += "\n To execute each test case, the ADML process would be executed with a";
1430 result += "\n specific library path. But the main use would be the stress programming";
1431 result += "\n to achieve a great amount of cloned (even mixed) tests without using";
1432 result += "\n the management operation interface by mean http or signals: a single";
1433 result += "\n call to 'dynamic' would be enough to start a cascade of internally";
1434 result += "\n implemented operations.";
1435 result += "\n This operation accepts a generic string argument (piped or not, as you";
1436 result += "\n desire and depending on your procedure implementation).";
1438 result += "\n This operation requires advanced programming and knowlegde of ANNA Diameter";
1439 result += "\n stack and testing framework, to take advantage of all the possibilities.";
1443 result += "\nUSING OPERATIONS INTERFACE";
1444 result += "\n--------------------------";
1446 result += "\n------------------------------------------------------------------------- Operations via HTTP interface";
1448 result += "\nAll the operations described above can be used through the optional HTTP interface. You only have";
1449 result += "\n to define the http server at the command line with something like: '--httpServer localhost:9000'.";
1450 result += "\nTo send the task, we shall build the http request body with the operation string. Some examples";
1451 result += "\n using curl client could be:";
1453 result += "\n curl -m 1 --data \"diameterServerSessions|4\" localhost:9000";
1454 result += "\n curl -m 1 --data \"code|ccr.xml\" localhost:9000";
1455 result += "\n curl -m 1 --data \"decode|ccr.hex\" localhost:9000";
1456 result += "\n curl -m 1 --data \"sendxml2e|ccr.xml\" localhost:9000";
1457 result += "\n etc.";
1459 result += "\n------------------------------------------------------------------------- Operations via SIGUSR2 signal";
1461 result += "\nThe alternative using SIGUSR2 signal requires the creation of the task(s) file which will be read at";
1462 result += "\n signal event:";
1463 result += "\n echo \"<<operation>\" > "; result += getSignalUSR2InputFile();
1464 result += "\n then";
1465 result += "\n kill -12 <pid>";
1467 result += "\n kill -s SIGUSR2 <pid>";
1468 result += "\n and then see the results:";
1469 result += "\n cat "; result += getSignalUSR2OutputFile();
1471 result += "\n (this file is ended with EOF final line, useful managing huge batch files to ensure the job completion)";
1473 result += "\nYou could place more than one line (task) in the input file. Output reports will be appended in that";
1474 result += "\n case over the output file. Take into account that all the content of the task file will be executed";
1475 result += "\n sinchronously by the process. If you are planning traffic load, better use the asynchronous http";
1476 result += "\n interface.";
1484 void Launcher::logStatisticsSamples(const std::string &conceptsList) throw() {
1485 anna::statistics::Engine &statEngine = anna::statistics::Engine::instantiate();
1487 if(conceptsList == "all") {
1488 if(statEngine.enableSampleLog(/* -1: all concepts */))
1489 LOGDEBUG(anna::Logger::debug("Sample log activation for all statistic concepts", ANNA_FILE_LOCATION));
1491 else if(conceptsList == "none") {
1492 if(statEngine.disableSampleLog(/* -1: all concepts */))
1493 LOGDEBUG(anna::Logger::debug("Sample log deactivation for all statistic concepts", ANNA_FILE_LOCATION));
1495 anna::Tokenizer lst;
1496 lst.apply(conceptsList, ",");
1498 if(lst.size() >= 1) {
1499 anna::Tokenizer::const_iterator tok_min(lst.begin());
1500 anna::Tokenizer::const_iterator tok_max(lst.end());
1501 anna::Tokenizer::const_iterator tok_iter;
1504 for(tok_iter = tok_min; tok_iter != tok_max; tok_iter++) {
1505 conceptId = atoi(anna::Tokenizer::data(tok_iter));
1507 if(statEngine.enableSampleLog(conceptId))
1508 LOGDEBUG(anna::Logger::debug(anna::functions::asString("Sample log activation for statistic concept id = %d", conceptId), ANNA_FILE_LOCATION));
1515 void Launcher::eventOperation(const std::string &operation, std::string &response_content) throw(anna::RuntimeException) {
1516 LOGMETHOD(anna::TraceMethod tm("Launcher", "eventOperation", ANNA_FILE_LOCATION));
1517 if (operation == "") return; // ignore
1518 LOGDEBUG(anna::Logger::debug(anna::functions::asString("Operation: %s", operation.c_str()), ANNA_FILE_LOCATION));
1520 // Default response:
1521 response_content = "Operation processed with exception: ";
1522 response_content += operation;
1523 std::string opt_response_content = ""; // aditional response content
1524 anna::DataBlock db_aux(true);
1525 anna::diameter::codec::Message codecMsg; // auxiliary codec message
1528 CommandLine& cl(anna::CommandLine::instantiate());
1529 TestManager &testManager = TestManager::instantiate();
1532 ///////////////////////////////////////////////////////////////////
1533 // Simple operations without arguments:
1535 // Dynamic operation:
1536 if(operation.find("dynamic") == 0) {
1538 int op_size = operation.size();
1539 std::string args = ((operation.find("dynamic|") == 0) && (op_size > 8)) ? operation.substr(8) : "";
1540 if (args == "" && op_size != 7)
1541 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
1542 p.execute(args, response_content);
1547 if(operation == "help") {
1548 response_content = help();
1552 // Reset performance data:
1553 if(operation == "collect") {
1556 response_content = "All process counters & statistic information have been reset";
1560 // Counters dump on demand:
1561 if(operation == "forceCountersRecord") {
1562 forceCountersRecord();
1563 response_content = "Current counters have been dump to disk";
1567 // OAM & statistics:
1568 if(operation == "show-oam") {
1569 anna::xml::Node root("root");
1570 response_content = anna::xml::Compiler().apply(oamAsXML(&root));
1573 if(operation == "show-stats") {
1574 anna::xml::Node root("root");
1575 response_content = anna::xml::Compiler().apply(statsAsXML(&root));
1579 ///////////////////////////////////////////////////////////////////
1580 // Tokenize operation
1582 params.apply(operation, "|", "<null>" /* allow contiguous separators */);
1583 int numParams = params.size() - 1;
1585 // Get the operation type and parameters:
1586 Tokenizer::const_iterator tok_iter = params.begin();
1587 std::string opType = Tokenizer::data(tok_iter);
1588 std::string param1, param2, param3, param4, param5, param6, param7, param8, param9, param10, param11;
1589 if(numParams >= 1) { tok_iter++; param1 = Tokenizer::data(tok_iter); }
1590 if(numParams >= 2) { tok_iter++; param2 = Tokenizer::data(tok_iter); }
1591 if(numParams >= 3) { tok_iter++; param3 = Tokenizer::data(tok_iter); }
1593 if(numParams >= 4) { tok_iter++; param4 = Tokenizer::data(tok_iter); }
1594 if(numParams >= 5) { tok_iter++; param5 = Tokenizer::data(tok_iter); }
1595 if(numParams >= 6) { tok_iter++; param6 = Tokenizer::data(tok_iter); }
1596 if(numParams >= 7) { tok_iter++; param7 = Tokenizer::data(tok_iter); }
1597 if(numParams >= 8) { tok_iter++; param8 = Tokenizer::data(tok_iter); }
1598 if(numParams >= 9) { tok_iter++; param9 = Tokenizer::data(tok_iter); }
1599 if(numParams >= 10) { tok_iter++; param10 = Tokenizer::data(tok_iter); }
1600 if(numParams >= 11) { tok_iter++; param11 = Tokenizer::data(tok_iter); }
1601 // Remove '<null>' artificial token to ease further checkings:
1602 if (param1 == "<null>") param1 = "";
1603 if (param2 == "<null>") param2 = "";
1604 if (param3 == "<null>") param3 = "";
1605 if (param4 == "<null>") param4 = "";
1606 if (param5 == "<null>") param5 = "";
1607 if (param6 == "<null>") param6 = "";
1608 if (param7 == "<null>") param7 = "";
1609 if (param8 == "<null>") param8 = "";
1610 if (param9 == "<null>") param9 = "";
1611 if (param10 == "<null>") param10 = "";
1612 if (param11 == "<null>") param11 = "";
1614 // No operation has more than 2 arguments except 'test' ...
1615 if(opType != "test" && numParams > 2)
1616 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
1619 // Check the number of parameters:
1620 bool wrongBody = false;
1622 if((opType == "change-dir") && (numParams > 1)) wrongBody = true;
1623 if((opType == "log-statistics-samples") && (numParams != 1)) wrongBody = true;
1624 if((opType == "node") && (numParams > 1)) wrongBody = true;
1626 if((opType == "node_auto") && (numParams > 0)) wrongBody = true;
1628 if(((opType == "code") || (opType == "decode")) && (numParams != 2)) wrongBody = true;
1630 if(((opType == "sendxml2e") || (opType == "sendhex2e")) && (numParams != 1)) wrongBody = true;
1632 if((opType == "burst") && (numParams < 1)) wrongBody = true;
1634 if((opType == "test") && (numParams < 1)) wrongBody = true;
1636 if(((opType == "sendxml2c") || (opType == "sendhex2c") || (opType == "loadxml") || (opType == "diameterServerSessions")) && (numParams != 1)) wrongBody = true;
1640 std::string msg = "Wrong body content format on HTTP Request for '";
1642 msg += "' operation (missing parameter/s). Use 'help' management command to see more information.";
1643 throw anna::RuntimeException(msg, ANNA_FILE_LOCATION);
1647 if(opType == "context") {
1648 std::string contextFile = ((numParams == 1) ? param1 : anna::functions::asString("/var/tmp/anna.context.%05d", getPid()));
1649 writeContext(contextFile);
1650 response_content = anna::functions::asString("Context dumped on file '%s'", contextFile.c_str());
1654 if(opType == "log-statistics-samples") {
1655 logStatisticsSamples(param1);
1656 response_content = anna::functions::asString("Log statistics samples for '%s' concepts", param1.c_str());
1660 // Change execution directory:
1661 if(opType == "change-dir") {
1662 if (param1 == "") param1 = a_initialWorkingDirectory;
1663 if (chdir(param1.c_str()) == 0)
1664 response_content = "New execution directory configured: ";
1666 response_content = "Cannot assign provided execution directory: ";
1668 response_content += param1;
1672 if(opType == "services") {
1673 std::string servicesFile = ((numParams == 1) ? param1 : "services.xml");
1675 loadServices(servicesFile, true /* bind entities */);
1677 catch(anna::RuntimeException &ex) {
1679 response_content = anna::functions::asString("Loaded services from file '%s' with errors", servicesFile.c_str());
1682 response_content = anna::functions::asString("Loaded services from file '%s'", servicesFile.c_str());
1687 if(opType == "node") {
1689 if (setWorkingNode(param1)) response_content = anna::functions::asString("Forced node is now '%s'", param1.c_str());
1692 if (a_workingNode) {
1693 response_content = "Working node is forced to be: \n\n";
1694 response_content += a_workingNode->asXMLString();
1697 response_content = "Working node is automatic";
1702 if(opType == "node_auto") {
1703 a_workingNode = NULL;
1704 response_content = "Working node has been set to automatic";
1708 // Operated host from possible forced-working node:
1709 a_operatedHost = a_workingNode ? a_workingNode /* priority */: NULL /* auto */;
1711 // If any message is managed: updateOperatedOriginHostWithMessage(codecMessage)
1712 // To operate, use the exception-protected methods which never will return NULL:
1713 // getOperatedHost(), getOperatedEntity(), getOperatedServer(), getOperatedEngine()
1716 if(opType == "code") {
1717 codecMsg.loadXML(param1);
1718 std::string hexString = anna::functions::asHexString(codecMsg.code());
1720 std::ofstream outfile(param2.c_str(), std::ifstream::out);
1721 outfile.write(hexString.c_str(), hexString.size());
1723 } else if(opType == "decode") {
1724 // Get DataBlock from file with hex content:
1725 if(!getDataBlockFromHexFile(param1, db_aux))
1726 throw anna::RuntimeException("Error reading hex file provided", ANNA_FILE_LOCATION);
1729 try { codecMsg.decode(db_aux); } catch(anna::RuntimeException &ex) { ex.trace(); }
1731 std::string xmlString = codecMsg.asXMLString();
1733 std::ofstream outfile(param2.c_str(), std::ifstream::out);
1734 outfile.write(xmlString.c_str(), xmlString.size());
1736 } else if((opType == "hide") || (opType == "show") || (opType == "hidden") || (opType == "shown")) {
1740 std::string key = param1;
1744 if(opType == "hide") getOperatedEngine()->findClientSession(key)->hide();
1746 if(opType == "show") getOperatedEngine()->findClientSession(key)->show();
1748 if(opType == "hidden") opt_response_content = getOperatedEngine()->findClientSession(key)->hidden() ? "true" : "false";
1750 if(opType == "shown") opt_response_content = getOperatedEngine()->findClientSession(key)->shown() ? "true" : "false";
1752 std::string address;
1754 anna::functions::getAddressAndPortFromSocketLiteral(param1, address, port);
1756 if(opType == "hide") getOperatedEngine()->findServer(address, port)->hide();
1758 if(opType == "show") getOperatedEngine()->findServer(address, port)->show();
1760 if(opType == "hidden") opt_response_content = getOperatedEngine()->findServer(address, port)->hidden() ? "true" : "false";
1762 if(opType == "shown") opt_response_content = getOperatedEngine()->findServer(address, port)->shown() ? "true" : "false";
1765 if(opType == "hide") getOperatedEntity()->hide();
1767 if(opType == "show") getOperatedEntity()->show();
1769 if(opType == "hidden") opt_response_content = getOperatedEntity()->hidden() ? "true" : "false";
1771 if(opType == "shown") opt_response_content = getOperatedEntity()->shown() ? "true" : "false";
1773 } else if((opType == "sendxml2e") || (opType == "sendhex2e")) {
1774 anna::diameter::comm::Message *msg;
1776 if(opType == "sendxml2e") {
1777 codecMsg.loadXML(param1);
1778 updateOperatedOriginHostWithMessage(codecMsg);
1779 msg = getOperatedHost()->createCommMessage();
1781 try { codecMsg.valid(); } catch(anna::RuntimeException &ex) { ex.trace(); } // at least we need to see validation errors although it will continue sending (see validation mode configured in launcher)
1782 msg->setBody(codecMsg.code());
1784 // Get DataBlock from file with hex content:
1785 if(!getDataBlockFromHexFile(param1, db_aux))
1786 throw anna::RuntimeException("Error reading hex file provided", ANNA_FILE_LOCATION);
1787 msg = getOperatedHost()->createCommMessage();
1788 msg->setBody(db_aux);
1789 try { if(getOperatedHost()->logEnabled()) codecMsg.decode(db_aux); } catch(anna::RuntimeException &ex) { ex.trace(); }
1792 bool success = getOperatedEntity()->send(msg, cl.exists("balance"));
1793 getOperatedHost()->releaseCommMessage(msg);
1796 if(getOperatedHost()->logEnabled()) {
1797 anna::diameter::comm::Server *usedServer = getOperatedEntity()->getLastUsedResource();
1798 anna::diameter::comm::ClientSession *usedClientSession = usedServer ? usedServer->getLastUsedResource() : NULL;
1799 std::string detail = usedClientSession ? usedClientSession->asString() : "<null client session>"; // shouldn't happen
1800 getOperatedHost()->writeLogFile(codecMsg, (success ? "sent2e" : "send2eError"), detail);
1802 } else if((opType == "burst")) {
1804 if (!uniqueOriginHost())
1805 throw anna::RuntimeException("Burst category operations are only allowed in single host node configuration. This is only to simplify user experience.", ANNA_FILE_LOCATION);
1807 // burst|clear clears all loaded burst messages.
1808 // burst|load|<source_file> loads the next diameter message into launcher burst.
1809 // burst|start|<initial load> starts the message sending with a certain initial load.
1810 // burst|push|<load amount> sends specific non-aynchronous load.
1811 // burst|stop stops the burst cycle.
1812 // burst|repeat|[[yes]|no] restarts the burst launch when finish.
1813 // burst|send|<amount> send messages from burst list. The main difference with
1814 // start/push operations is that burst won't be awaken.
1815 // Externally we could control sending time (no request
1816 // will be sent for answers).
1817 // burst|goto|<order> Updates current burst pointer position.
1818 // burst|look|<order> Show programmed burst message for order provided, current when missing.
1820 if(param1 == "clear") {
1821 opt_response_content = "removed ";
1822 opt_response_content += anna::functions::asString(getOperatedHost()->clearBurst());
1823 opt_response_content += " elements";
1824 } else if(param1 == "load") {
1825 if(param2 == "") throw anna::RuntimeException("Missing xml path file for burst load operation", ANNA_FILE_LOCATION);
1827 codecMsg.loadXML(param2);
1828 if(codecMsg.isAnswer()) throw anna::RuntimeException("Cannot load diameter answers for burst feature", ANNA_FILE_LOCATION);
1829 try { codecMsg.valid(); } catch(anna::RuntimeException &ex) { ex.trace(); } // at least we need to see validation errors although it will continue loading (see validation mode configured in launcher)
1831 int position = getOperatedHost()->loadBurstMessage(codecMsg.code());
1832 opt_response_content = "loaded '";
1833 opt_response_content += param2;
1834 opt_response_content += "' file into burst list position ";
1835 opt_response_content += anna::functions::asString(position);
1836 } else if(param1 == "start") {
1837 if(param2 == "") throw anna::RuntimeException("Missing initial load for burst start operation", ANNA_FILE_LOCATION);
1839 int initialLoad = atoi(param2.c_str());
1840 int processed = getOperatedHost()->startBurst(initialLoad);
1843 opt_response_content = "initial load completed for ";
1844 opt_response_content += anna::functions::entriesAsString(processed, "message");
1846 } else if(param1 == "push") {
1847 if(param2 == "") throw anna::RuntimeException("Missing load amount for burst push operation", ANNA_FILE_LOCATION);
1849 int pushed = getOperatedHost()->pushBurst(atoi(param2.c_str()));
1852 opt_response_content = "pushed ";
1853 opt_response_content += anna::functions::entriesAsString(pushed, "message");
1855 } else if(param1 == "pop") {
1856 if(param2 == "") throw anna::RuntimeException("Missing amount for burst pop operation", ANNA_FILE_LOCATION);
1858 int releaseLoad = atoi(param2.c_str());
1859 int popped = getOperatedHost()->popBurst(releaseLoad);
1862 opt_response_content = "burst popped for ";
1863 opt_response_content += anna::functions::entriesAsString(popped, "message");
1865 } else if(param1 == "stop") {
1866 int left = getOperatedHost()->stopBurst();
1869 opt_response_content += anna::functions::entriesAsString(left, "message");
1870 opt_response_content += " left to the end of the cycle";
1872 } else if(param1 == "repeat") {
1873 if(param2 == "") param2 = "yes";
1875 bool repeat = (param2 == "yes");
1876 getOperatedHost()->repeatBurst(repeat);
1877 opt_response_content += (repeat ? "repeat enabled" : "repeat disabled");
1878 } else if(param1 == "send") {
1879 if(param2 == "") throw anna::RuntimeException("Missing amount for burst send operation", ANNA_FILE_LOCATION);
1881 int sent = getOperatedHost()->sendBurst(atoi(param2.c_str()));
1884 opt_response_content = "sent ";
1885 opt_response_content += anna::functions::entriesAsString(sent, "message");
1887 } else if(param1 == "goto") {
1888 if(param2 == "") throw anna::RuntimeException("Missing order position for burst goto operation", ANNA_FILE_LOCATION);
1890 opt_response_content = getOperatedHost()->gotoBurst(atoi(param2.c_str()));
1891 } else if(param1 == "look") {
1892 int order = ((param2 != "") ? atoi(param2.c_str()) : -1);
1893 opt_response_content = "\n\n";
1894 opt_response_content += getOperatedHost()->lookBurst(order);
1896 throw anna::RuntimeException("Wrong body content format on HTTP Request for 'burst' operation (unexpected action parameter). See help", ANNA_FILE_LOCATION);
1899 } else if((opType == "test")) {
1900 // test|<id>|<command>[|parameters] Add a new step to the test case ...
1901 // test|ttps|<amount> Starts/resume the provided number of time ticks per second (ttps). The ADML starts ...
1902 // test|next[|<sync-amount>] Forces the execution of the next test case(s) without waiting for test manager tick ...
1903 // test|ip-limit[|amount] In-progress limit of test cases. No new test cases will be launched over this value ...
1904 // test|repeats|<amount> Restarts the whole programmed test list when finished the amount number of times ...
1905 // test|report|<initialized/in-progress/failed/success/[all]/none>[|[yes]|no]
1906 // Enables/disables report generation for a certain test case state: initialized, in-progress ...
1907 // test|report-hex[|[yes]|no] Reports could include the diameter messages in hexadecimal format. Disabled by default.
1908 // test|goto|<id> Updates current test pointer position.
1909 // test|look[|id] Show programmed test case for id provided, current when missing ...
1910 // test|interact|amount|id Makes interactive a specific test case id. The amount is the margin of execution steps ...
1911 // test|reset|<[soft]/hard>[|id] Reset the test case for id provided, all the tests when missing ...
1912 // test|clear Clears all the programmed test cases.
1913 // test|summary Test manager general report (number of test cases, counts by state ...
1916 if(param1 == "ttps") {
1918 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
1920 bool success = ((param2 != "") ? testManager.configureTTPS(atoi(param2.c_str())) : false);
1922 opt_response_content = "assigned new test launch rate to ";
1923 opt_response_content += anna::functions::asString(atoi(param2.c_str()));
1924 opt_response_content += " events per second";
1927 opt_response_content += "unable to configure the test rate provided";
1930 else if (param1 == "next") {
1932 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
1934 int sync_amount = ((param2 != "") ? atoi(param2.c_str()) : 1);
1936 if (sync_amount < 1)
1937 throw anna::RuntimeException("The parameter 'sync-amount' must be a positive integer value", ANNA_FILE_LOCATION);
1939 bool success = testManager.execTestCases(sync_amount);
1941 opt_response_content = (success ? "" : "not completely " /* completed cycle and no repeats, rare case */);
1942 opt_response_content += "processed ";
1943 opt_response_content += anna::functions::asString(sync_amount);
1944 opt_response_content += ((sync_amount > 1) ? " test cases synchronously" : " test case");
1946 else if(param1 == "ip-limit") {
1948 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
1952 limit = atoi(param2.c_str());
1953 testManager.setInProgressLimit(limit);
1954 opt_response_content = "new in-progress limit: ";
1955 opt_response_content += (limit != UINT_MAX) ? anna::functions::asString(limit) : "<no limit>";
1958 opt_response_content = "in-progress limit amount: ";
1959 limit = testManager.getInProgressLimit();
1960 opt_response_content += (limit != UINT_MAX) ? anna::functions::asString(limit) : "<no limit>";
1961 opt_response_content += "; currently there are ";
1962 opt_response_content += anna::functions::asString(testManager.getInProgressCount());
1963 opt_response_content += " test cases running";
1966 else if(param1 == "repeats") {
1968 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
1969 int repeats = atoi(param2.c_str());
1970 if (repeats < 0) repeats = -1;
1971 testManager.setPoolRepeats(repeats);
1972 std::string nolimit = (repeats != -1) ? "":" [no limit]";
1973 opt_response_content += anna::functions::asString("Pool repeats: %d%s (current cycle: %d)", repeats, nolimit.c_str(), testManager.getPoolCycle());
1975 else if(param1 == "report") {
1977 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
1979 if(param2 == "") param2 = "all";
1980 if(param3 == "") param3 = "yes";
1981 bool enable = (param3 == "yes");
1983 if(param2 == "initialized")
1984 testManager.setDumpInitializedReports(enable);
1985 else if(param2 == "in-progress")
1986 testManager.setDumpInProgressReports(enable);
1987 else if(param2 == "failed")
1988 testManager.setDumpFailedReports(enable);
1989 else if(param2 == "success")
1990 testManager.setDumpSuccessReports(enable);
1991 else if(param2 == "all") {
1993 testManager.setDumpAllReports(enable);
1995 else if(param2 == "none") {
1998 testManager.setDumpAllReports(enable);
2001 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2003 opt_response_content += (enable ? "report enabled " : "report disabled ");
2004 opt_response_content += "for tests in '";
2005 opt_response_content += param2;
2006 opt_response_content += "' state";
2008 else if(param1 == "report-hex") {
2010 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2012 if(param2 == "") param2 = "yes";
2013 testManager.setDumpHex((param2 == "yes"));
2014 opt_response_content += (testManager.getDumpHex() ? "report includes hexadecimal messages" : "report excludes hexadecimal messages");
2016 else if(param1 == "goto") {
2018 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2020 if(param2 == "") throw anna::RuntimeException("Missing id for test goto operation", ANNA_FILE_LOCATION);
2021 int id = atoi(param2.c_str());
2022 if (testManager.gotoTestCase(id)) {
2023 opt_response_content = "position updated for id provided (";
2026 opt_response_content = "cannot found test id (";
2028 opt_response_content += anna::functions::asString(id);
2029 opt_response_content += ")";
2031 else if(param1 == "look") {
2033 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2035 int id = ((param2 != "") ? atoi(param2.c_str()) : -1);
2036 TestCase *testCase = testManager.findTestCase(id);
2039 response_content = testCase->asXMLString();
2044 opt_response_content = "no current test case detected (testing started ?)";
2047 opt_response_content = "cannot found test id (";
2048 opt_response_content += anna::functions::asString(id);
2049 opt_response_content += ")";
2053 else if (param1 == "interact") {
2055 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2057 int amount = atoi(param2.c_str());
2059 throw anna::RuntimeException("Interactive amount must be -1 (to disable interactive mode) or a positive number.", ANNA_FILE_LOCATION);
2061 int id = atoi(param3.c_str());
2062 TestCase *testCase = testManager.findTestCase(id);
2065 testCase->makeInteractive(false);
2066 opt_response_content = "interactive mode disabled";
2069 testCase->addInteractiveAmount(amount);
2070 opt_response_content = "added interactive amount of ";
2071 opt_response_content += anna::functions::asString(amount);
2072 opt_response_content += " units";
2073 if (amount == 0) opt_response_content += " (0: freezing a non-interactive testcase, no effect on already interactive)";
2075 opt_response_content += " for test case id ";
2076 opt_response_content += anna::functions::asString(id);
2079 opt_response_content = "cannot found test id (";
2080 opt_response_content += anna::functions::asString(id);
2081 opt_response_content += ")";
2084 else if(param1 == "reset") {
2086 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2088 if(param2 == "") param2 = "soft";
2089 if (param2 != "soft" && param2 != "hard")
2090 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2092 int id = ((param3 != "") ? atoi(param3.c_str()) : -1);
2093 TestCase *testCase = ((id != -1) ? testManager.findTestCase(id) : NULL);
2096 bool done = testCase->reset((param2 == "hard") ? true:false);
2097 opt_response_content = "test ";
2098 opt_response_content += param2;
2099 opt_response_content += " reset for id ";
2100 opt_response_content += anna::functions::asString(id);
2101 opt_response_content += done ? ": done": ": not done";
2105 bool anyReset = testManager.resetPool((param2 == "hard") ? true:false);
2106 opt_response_content = param2; opt_response_content += " reset have been sent to all programmed tests: "; opt_response_content += anyReset ? "some/all have been reset" : "nothing was reset";
2109 opt_response_content = "cannot found test id (";
2110 opt_response_content += anna::functions::asString(id);
2111 opt_response_content += ")";
2115 else if(param1 == "clear") {
2117 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2119 if (testManager.clearPool()) {
2120 opt_response_content = "all the programmed test cases have been dropped";
2123 opt_response_content = "there are not programmed test cases to be removed";
2126 else if(param1 == "summary") {
2127 response_content = testManager.asXMLString();
2131 int id = atoi(param1.c_str());
2133 throw anna::RuntimeException("Invalid test case identifier: must be a non-negative number", ANNA_FILE_LOCATION);
2135 // PARAM: 1 2 3 4 5 6 7 8 9 10 11
2136 // test|<id>|<command>
2138 // sendxml2e| <file>[|<step number>]
2139 // sendxml2c| <file>[|<step number>]
2141 // wait<fe/fc>|[code]|[bitR]|[hopByHop]|[applicationId]|[sessionId]|[resultCode]|[msisdn]|[imsi]|[serviceContextId]
2142 // wait<fe/fc>-answer|<step number>
2143 // wait<fe/fc>-regexp|<regexp>
2144 if(param2 == "") throw anna::RuntimeException("Missing command for test id operation", ANNA_FILE_LOCATION);
2147 if (param2 == "timeout") {
2149 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2150 if(param3 == "") throw anna::RuntimeException("Missing milliseconds for 'timeout' command in test id operation", ANNA_FILE_LOCATION);
2151 anna::Millisecond timeout = checkTimeMeasure("Test case timeout", param3);
2152 testManager.getTestCase(id)->addTimeout(timeout); // creates / reuses
2154 else if ((param2 == "sendxml2e")||(param2 == "sendxml2c")) {
2156 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2157 if(param3 == "") throw anna::RuntimeException(anna::functions::asString("Missing xml file for '%s' command in test id operation", param2.c_str()), ANNA_FILE_LOCATION);
2158 codecMsg.loadXML(param3);
2160 if (!codecMsg.isRequest() && (param4 == ""))
2161 anna::Logger::warning("Step number has not been provided. Take into account that this answer message will be sent 'as is' and sequence information could be wrong at the remote peer", ANNA_FILE_LOCATION);
2164 updateOperatedOriginHostWithMessage(codecMsg);
2165 int stepNumber = ((param4 != "") ? atoi(param4.c_str()):-1);
2167 if (param2 == "sendxml2e")
2168 testManager.getTestCase(id)->addSendxml2e(codecMsg.code(), getOperatedHost(), stepNumber); // creates / reuses
2170 testManager.getTestCase(id)->addSendxml2c(codecMsg.code(), getOperatedHost(), stepNumber); // creates / reuses
2172 else if (param2 == "delay") {
2174 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2175 if(param3 == "") throw anna::RuntimeException("Missing milliseconds for 'delay' command in test id operation", ANNA_FILE_LOCATION);
2176 anna::Millisecond delay = ((param3 == "0" /* special case */) ? (anna::Millisecond)0 : checkTimeMeasure("Test case delay step", param3));
2177 testManager.getTestCase(id)->addDelay(delay); // creates / reuses
2179 else if ((param2 == "waitfe")||(param2 == "waitfc")) {
2181 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2182 if (param3 != "" || param4 != "" || param5 != "" || param6 != "" || param7 != "" || param8 != "" || param9 != "" || param10 != "" || param11 != "") {
2183 bool fromEntity = (param2.substr(4,2) == "fe");
2184 testManager.getTestCase(id)->addWait(fromEntity, param3, param4, param5, param6, param7, param8, param9, param10, param11);
2187 throw anna::RuntimeException(anna::functions::asString("Missing condition for '%s' command in test id operation", param2.c_str()), ANNA_FILE_LOCATION);
2190 else if ((param2 == "waitfe-regexp")||(param2 == "waitfc-regexp")) {
2192 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2194 bool fromEntity = (param2.substr(4,2) == "fe");
2195 testManager.getTestCase(id)->addWaitRegexp(fromEntity, param3);
2198 throw anna::RuntimeException(anna::functions::asString("Missing condition for '%s' command in test id operation", param2.c_str()), ANNA_FILE_LOCATION);
2201 else if (param2 == "sh-command") {
2202 // Allow pipes in command:
2203 //if (numParams > 4)
2204 // throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2205 if(param3 == "") throw anna::RuntimeException("Missing script/executable command-line for 'sh-command' in test id operation", ANNA_FILE_LOCATION);
2206 std::string token = "|sh-command|";
2207 std::string command = operation.substr(operation.find(token) + token.size());
2208 testManager.getTestCase(id)->addCommand(command); // creates / reuses
2211 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2215 } else if((opType == "sendxml2c") || (opType == "sendhex2c")) {
2216 anna::diameter::comm::Message *msg;
2218 if(opType == "sendxml2c") {
2219 codecMsg.loadXML(param1);
2220 updateOperatedOriginHostWithMessage(codecMsg);
2221 msg = getOperatedHost()->createCommMessage();
2223 try { codecMsg.valid(); } catch(anna::RuntimeException &ex) { ex.trace(); } // at least we need to see validation errors although it will continue sending (see validation mode configured in launcher)
2225 msg->setBody(codecMsg.code());
2227 // Get DataBlock from file with hex content:
2228 if(!getDataBlockFromHexFile(param1, db_aux))
2229 throw anna::RuntimeException("Error reading hex file provided", ANNA_FILE_LOCATION);
2230 msg = getOperatedHost()->createCommMessage();
2231 msg->setBody(db_aux);
2234 bool success = getOperatedServer()->send(msg);
2235 getOperatedHost()->releaseCommMessage(msg);
2238 if(getOperatedHost()->logEnabled()) {
2239 anna::diameter::comm::ServerSession *usedServerSession = getOperatedServer()->getLastUsedResource();
2240 std::string detail = usedServerSession ? usedServerSession->asString() : "<null server session>"; // shouldn't happen
2241 getOperatedHost()->writeLogFile(codecMsg, (success ? "sent2c" : "send2cError"), detail);
2243 } else if(opType == "loadxml") {
2244 codecMsg.loadXML(param1);
2245 response_content = codecMsg.asXMLString();
2247 } else if(opType == "diameterServerSessions") {
2248 int diameterServerSessions = atoi(param1.c_str());
2249 getOperatedServer()->setMaxConnections(diameterServerSessions);
2251 } else if(opType == "answerxml2c") {
2252 if(param1 == "") { // programmed answers FIFO's to stdout
2253 response_content = getOperatedServer()->getReactingAnswers()->asString("ANSWERS TO CLIENT");
2255 } else if (param1 == "rotate") {
2256 getOperatedServer()->getReactingAnswers()->rotate(true);
2257 } else if (param1 == "exhaust") {
2258 getOperatedServer()->getReactingAnswers()->rotate(false);
2259 } else if (param1 == "clear") {
2260 getOperatedServer()->getReactingAnswers()->clear();
2261 } else if (param1 == "dump") {
2262 getOperatedServer()->getReactingAnswers()->dump();
2264 codecMsg.loadXML(param1);
2265 updateOperatedOriginHostWithMessage(codecMsg);
2266 anna::diameter::codec::Message *message = getOperatedHost()->getCodecEngine()->createMessage(param1); // loads xml again, lesser of two evils
2267 LOGDEBUG(anna::Logger::debug(message->asXMLString(), ANNA_FILE_LOCATION));
2269 if(message->isRequest())
2270 throw anna::RuntimeException("Cannot program diameter requests. Answer type must be provided", ANNA_FILE_LOCATION);
2272 int code = message->getId().first;
2273 LOGDEBUG(anna::Logger::debug("Adding a new programed 'answer to client' to the FIFO queue corresponding to its message code ...", ANNA_FILE_LOCATION));
2274 getOperatedServer()->getReactingAnswers()->addMessage(code, message);
2276 } else if(opType == "answerxml2e") {
2278 if(param1 == "") { // programmed answers FIFO's to stdout
2279 response_content = getOperatedEntity()->getReactingAnswers()->asString("ANSWERS TO ENTITY");
2281 } else if (param1 == "rotate") {
2282 getOperatedEntity()->getReactingAnswers()->rotate(true);
2283 } else if (param1 == "exhaust") {
2284 getOperatedEntity()->getReactingAnswers()->rotate(false);
2285 } else if (param1 == "clear") {
2286 getOperatedEntity()->getReactingAnswers()->clear();
2287 } else if (param1 == "dump") {
2288 getOperatedEntity()->getReactingAnswers()->dump();
2290 codecMsg.loadXML(param1);
2291 updateOperatedOriginHostWithMessage(codecMsg);
2292 anna::diameter::codec::Message *message = getOperatedHost()->getCodecEngine()->createMessage(param1); // loads xml again, lesser of two evils
2293 LOGDEBUG(anna::Logger::debug(message->asXMLString(), ANNA_FILE_LOCATION));
2295 if(message->isRequest())
2296 throw anna::RuntimeException("Cannot program diameter requests. Answer type must be provided", ANNA_FILE_LOCATION);
2298 int code = message->getId().first;
2299 LOGDEBUG(anna::Logger::debug("Adding a new programed 'answer to entity' to the FIFO queue corresponding to its message code ...", ANNA_FILE_LOCATION));
2300 getOperatedEntity()->getReactingAnswers()->addMessage(code, message);
2303 throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
2307 response_content = "Operation correctly processed: "; response_content += operation;
2308 if (opt_response_content != "") {
2309 response_content += " => ";
2310 response_content += opt_response_content;
2314 anna::xml::Node* Launcher::asXML(anna::xml::Node* parent) const
2316 anna::xml::Node* result = parent->createChild("launcher");
2317 anna::comm::Application::asXML(result);
2319 result->createAttribute("StartTime", a_start_time.asString());
2320 result->createAttribute("InitialWorkingDirectory", a_initialWorkingDirectory);
2321 result->createAttribute("SecondsLifeTime", anna::time::functions::lapsedMilliseconds() / 1000);
2323 for (origin_hosts_it it = a_originHosts.begin(); it != a_originHosts.end(); it++) {
2324 it->second->asXML(result);
2327 // Registered codec engines:
2328 anna::diameter::codec::EngineManager &em = anna::diameter::codec::EngineManager::instantiate();
2331 // OAM & statistics:
2335 // Testing: could be heavy if test case reports are enabled
2336 TestManager::instantiate().asXML(result);
2341 anna::xml::Node* Launcher::oamAsXML(anna::xml::Node* parent) const
2343 anna::xml::Node* result = parent->createChild("Oam");
2346 anna::diameter::comm::OamModule::instantiate().asXML(result);
2347 anna::diameter::comm::ApplicationMessageOamModule::instantiate().asXML(result);
2348 anna::diameter::codec::OamModule::instantiate().asXML(result);
2353 anna::xml::Node* Launcher::statsAsXML(anna::xml::Node* parent) const
2355 anna::xml::Node* result = parent->createChild("Statistics");
2358 anna::statistics::Engine::instantiate().asXML(result);