// Standard
#include <sstream> // std::istringstream
#include <iostream> // std::cout
+#include <math.h> // ceil
+#include <climits>
+#include <unistd.h> // chdir
+//#include <regex> TODO: use this from gcc4.9.0: http://stackoverflow.com/questions/8060025/is-this-c11-regex-error-me-or-the-compiler
+#include <stdio.h>
// Project
#include <anna/timex/Engine.hpp>
#include <anna/statistics/Engine.hpp>
+#include <anna/diameter/codec/functions.hpp>
#include <anna/diameter/codec/Engine.hpp>
+#include <anna/diameter/codec/EngineManager.hpp>
#include <anna/http/Transport.hpp>
#include <anna/diameter/stack/Engine.hpp>
#include <anna/diameter/helpers/base/functions.hpp>
#include <anna/time/functions.hpp>
#include <anna/diameter.comm/ApplicationMessageOamModule.hpp>
+#include <anna/testing/defines.hpp>
#include <anna/xml/xml.hpp>
+#include <anna/diameter.comm/OriginHost.hpp>
+#include <anna/diameter.comm/OriginHostManager.hpp>
// Process
-#include "Launcher.hpp"
-#include "RealmNode.hpp"
-#include "MyDiameterEngine.hpp"
+#include <Launcher.hpp>
+#include <Procedure.hpp>
+#include <EventOperation.hpp>
+#include <MyDiameterEngine.hpp>
+#include <anna/testing/TestManager.hpp>
+#include <anna/testing/TestCase.hpp>
-#define SIGUSR2_TASKS_INPUT_FILENAME "./sigusr2.tasks.input"
-#define SIGUSR2_TASKS_OUTPUT_FILENAME "./sigusr2.tasks.output"
+#define SIGUSR2_TASKS_INPUT_FILENAME "sigusr2.in"
+#define SIGUSR2_TASKS_OUTPUT_FILENAME "sigusr2.out"
const char *ServicesDTD = "\
<!ELEMENT services (stack*, node*)>\n\
\n\
<!ELEMENT stack EMPTY>\n\
-<!ATTLIST stack id CDATA #REQUIRED dictionary CDATA #REQUIRED>\n\
+<!ATTLIST stack id CDATA #REQUIRED dictionary CDATA #REQUIRED validationMode (BeforeEncoding | AfterDecoding | Always | Never) #IMPLIED validationDepth (Complete | FirstError) #IMPLIED fixMode (BeforeEncoding | AfterDecoding | Always | Never) #IMPLIED ignoreFlagsOnValidation (yes | no) #IMPLIED>\n\
<!--\n\
Stack record\n\
\n\
- id: Normally the id corresponds to the Application-Id for which the dictionary provided is designed.\n\
- (in multistack applications, it shall be mandatory respect such association to know the stack used\n\
- for processed messages).\n\
- dictionary: Path to the dictionary file\n\
+ id: Normally the id corresponds to the Application-Id for which the dictionary provided is designed\n\
+ (in multistack applications, it shall be mandatory respect such association to know the stack used\n\
+ for processed messages).\n\
+ dictionary: Path to the dictionary file.\n\
+ validationMode: Sets the validation mode. Default is 'AfterDecoding'.\n\
+ validationDepth: Sets the validation depth. Default is 'FirstError'.\n\
+ fixMode: Sets the fix mode. Default is 'BeforeEncoding'.\n\
+ ignoreFlagsOnValidation: Ignore flags during message validation. Default is 'no'.\n\
-->\n\
\n\
<!ELEMENT node EMPTY>\n\
-<!ATTLIST node originRealm CDATA #REQUIRED applicationId CDATA #REQUIRED originHost CDATA #IMPLIED cer CDATA #IMPLIED dwr CDATA #IMPLIED allowedInactivityTime CDATA #IMPLIED tcpConnectDelay CDATA #IMPLIED answersTimeout CDATA #IMPLIED ceaTimeout CDATA #IMPLIED watchdogPeriod CDATA #IMPLIED entity CDATA #IMPLIED entityServerSessions CDATA #IMPLIED diameterServer CDATA #IMPLIED diameterServerSessions CDATA #IMPLIED balance (yes | no) #IMPLIED sessionBasedModelsClientSocketSelection (SessionIdLowPart | SessionIdHighPart | SessionIdOptionalPart | RoundRobin) #IMPLIED retries CDATA #IMPLIED log CDATA #IMPLIED splitLog (yes | no) #IMPLIED detailedLog (yes | no) #IMPLIED dumpLog (yes | no) #IMPLIED burstLog (yes | no) #IMPLIED>\n\
+<!ATTLIST node originHost CDATA #REQUIRED applicationId CDATA #REQUIRED originRealm CDATA #IMPLIED cer CDATA #IMPLIED dwr CDATA #IMPLIED cea CDATA #IMPLIED allowedInactivityTime CDATA #IMPLIED tcpConnectDelay CDATA #IMPLIED answersTimeout CDATA #IMPLIED ceaTimeout CDATA #IMPLIED watchdogPeriod CDATA #IMPLIED entity CDATA #IMPLIED entityServerSessions CDATA #IMPLIED diameterServer CDATA #IMPLIED diameterServerSessions CDATA #IMPLIED balance (yes | no) #IMPLIED sessionBasedModelsClientSocketSelection (SessionIdLowPart | SessionIdHighPart | SessionIdOptionalPart | RoundRobin) #IMPLIED retries CDATA #IMPLIED log CDATA #IMPLIED splitLog (yes | no) #IMPLIED detailedLog (yes | no) #IMPLIED dumpLog (yes | no) #IMPLIED burstLog (yes | no) #IMPLIED>\n\
<!--\n\
Node record\n\
\n\
- originRealm: Node identifier (Origin-Realm name).\n\
+ originHost: Node identifier as diameter application host name.\n\
applicationId: The Application-Id provided must exists as a registered 'stack id'.\n\
- originHost: Diameter application host name (system name). If missing, process sets o.s. hostname\n\
- Note that if you have two or more realms, the names must be different.\n\
+ originRealm: Origin-Realm (domain-name internally used by default).\n\
+\n\
+\n\
+ - Diameter clients:\n\
+\n\
+ entity: Target diameter entity (comma-separated '<address>:<port>' format).\n\
+ For example: 10.20.30.40:3868,10.20.30.41:3868. If missing, no entity will be enabled.\n\
+ entityServerSessions: Diameter entity server sessions (0: diameter entity disabled). Default value of 1.\n\
cer: User defined CER path file to be encoded to establish diameter connections.\n\
- If missing, will be harcoded\n\
+ If missing, will be harcoded.\n\
dwr: User defined DWR path file to be encoded for diameter protocol keep alive.\n\
- If missing, will be harcoded\n\
- allowedInactivityTime: Milliseconds for the maximum allowed inactivity time on server sessions born over the\n\
- local server before being reset. If missing, default value of 90000 will be assigned\n\
+ If missing, will be harcoded.\n\
tcpConnectDelay: Milliseconds to wait TCP connect to any server. If missing, default value of 200 will\n\
be assigned\n\
- answersTimeout: Milliseconds to wait pending application answers from diameter peers. If missing,\n\
- default value of 10000 will be assigned\n\
ceaTimeout: Milliseconds to wait CEA from diameter server. If missing, default value of 'answersTimeout'\n\
- will be assigned\n\
+ will be assigned.\n\
watchdogPeriod: Milliseconds for watchdog timer (Tw) for diameter keep-alive procedure. If missing, default\n\
- value of 30000 will be assigned\n\
- entity: Target diameter entity (comma-separated '<address>:<port>' format).\n\
- For example: 10.20.30.40:3868,10.20.30.41:3868. If missing, no entity will be enabled\n\
- entityServerSessions: Diameter entity server sessions (0: diameter entity disabled). Default value of 1\n\
- diameterServer: Diameter own server address in '<address>:<port>' format. For example: 10.20.30.40:3868.\n\
- If missing, no local server will be enabled\n\
- diameterServerSessions: Diameter own server available connections (0: diameter server disabled). Default value of 1\n\
+ value of 30000 will be assigned.\n\
balance: Balance over entity servers instead of doing standard behaviour (first primary, secondary\n\
- if fails, etc.). Default value 'no'\n\
+ if fails, etc.). Default value 'no'.\n\
sessionBasedModelsClientSocketSelection: By default, round-robin will be applied for IEC model (SMS/MMS), and Session-Id Low Part\n\
will be analyzed for ECUR/SCUR model (data, voice and content). You could change ECUR/SCUR\n\
analysis behaviour providing 'SessionIdHighPart', 'SessionIdOptionalPart' (atoi applied;\n\
- usually subscriber id data, i.e. MSISDN or IMSI) and 'RoundRobin' (also 'SessionIdLowPart')\n\
- retries: Expired responses will cause a number of request retransmissions. Disabled by default (0 retries)\n\
- log: Process log file (operations result, traffic log, etc.). By default '<originRealm>.launcher.log'.\n\
+ usually subscriber id data, i.e. MSISDN or IMSI) and 'RoundRobin' (also 'SessionIdLowPart').\n\
+\n\
+\n\
+ - Diameter servers:\n\
+\n\
+ diameterServer: Diameter own server address in '<address>:<port>' format. For example: 10.20.30.40:3868.\n\
+ If missing, no local server will be enabled.\n\
+ diameterServerSessions: Diameter own server available connections (0: diameter server disabled). Default value of 1.\n\
+ Negative value implies no limit accepting incoming connections.\n\
+ cea: User defined CEA path file to be encoded to answer client CERs.\n\
+ If missing, will be harcoded.\n\
+ allowedInactivityTime: Milliseconds for the maximum allowed inactivity time on server sessions born over the\n\
+ local server before being reset. If missing, default value of 90000 will be assigned.\n\
+\n\
+\n\
+ - General:\n\
+\n\
+ answersTimeout: Milliseconds to wait pending application answers from diameter peers. If missing,\n\
+ default value of 10000 will be assigned.\n\
+ retries: Expired responses will cause a number of request retransmissions. Disabled by default (0 retries).\n\
+ log: Process log file (operations result, traffic log, etc.). By default '<originHost>.launcher.log'.\n\
Empty string or \"null\" name, to disable. Warning: there is no rotation for log files\n\
- (use logrotate or whatever you consider)\n\
- splitLog: Splits log file (appends to log filename, extensions with the type of event: see help on\n\
- startup information-level traces). No log files for code/decode and load operations are created.\n\
- Default value 'no'\n\
- detailedLog: Insert detailed information at log files. Should be disabled on automatic tests. Useful on\n\
- 'balance' mode to know messages flow along the sockets. Default value 'no'\n\
+ (use logrotate or whatever you consider).\n\
+ splitLog: Splits log file (appends to log filename, extensions with the type of event.\n\
+ (Check 'HELP.md' for more information). No log files for code/decode and load operations are created.\n\
+ Default value 'no'.\n\
+ detailedLog: Insert detailed information at log files (timestamps, communication resources, etc.). Useful\n\
+ to analyze the messages flow along the sockets (specially on 'balance' mode). Default 'no'.\n\
dumpLog: Write to disk every incoming/outcoming message named as:\n\
- '<originRealm>.<hop by hop>.<end to end>.<message code>.<request|answer>.<type of event>.xml'\n\
- Default value 'no'\n\
- burstLog: Burst operations log file. By default '<originRealm>.launcher.burst'. Empty string or \"null\" name, to disable.\n\
+ '<unix ms timestamp>.<originHost>.<hop by hop>.<end to end>.<message code>.<request|answer>.<type of event>.xml'\n\
+ Default value 'no'.\n\
+ burstLog: Burst operations log file. By default '<originHost>.launcher.burst'. Empty string or \"null\" name, to disable.\n\
Warning: there is no rotation for log files (use logrotate or whatever). Output: dot (.) for each\n\
burst message sent/pushed, cross (x) for popped ones, and order number when multiple of 1% of burst\n\
- list size, plus OTA requests when changed\n\
+ list size, plus OTA requests when changed.\n\
\n\
-->\n\
\n\
Launcher::Launcher() : anna::comm::Application("launcher", "DiameterLauncher", "1.1"), a_communicator(NULL) {
- a_codecEngine = new anna::diameter::codec::Engine("MyCodecEngine");
a_timeEngine = NULL;
a_counterRecorder = NULL;
+ a_admlMinResolution = 2 * anna::timex::Engine::minResolution; // 2*10 = 20 ms; 1000/20 = 50 ticks per second;
+ //a_admlMinResolution = (anna::Millisecond)100;
a_counterRecorderClock = NULL;
- // a_nodes.clear();
a_workingNode = NULL;
a_httpServerSocket = NULL;
}
+std::string Launcher::getSignalUSR2InputFile() const throw() {
+ return (a_initialWorkingDirectory + "/" + SIGUSR2_TASKS_INPUT_FILENAME);
+}
+
+std::string Launcher::getSignalUSR2OutputFile() const throw() {
+ return (a_initialWorkingDirectory + "/" + SIGUSR2_TASKS_OUTPUT_FILENAME);
+}
void Launcher::servicesFromXML(const anna::xml::Node* servicesNode, bool eventOperation) throw(anna::RuntimeException) {
- //<!ATTLIST stack id CDATA #REQUIRED dictionary CDATA #REQUIRED>
- const anna::xml::Attribute *id, *dictionary;
- // <!ATTLIST node originRealm CDATA #REQUIRED applicationId CDATA #REQUIRED originHost CDATA #IMPLIED cer CDATA #IMPLIED dwr CDATA #IMPLIED allowedInactivityTime CDATA #IMPLIED tcpConnectDelay CDATA #IMPLIED answersTimeout CDATA #IMPLIED ceaTimeout CDATA #IMPLIED watchdogPeriod CDATA #IMPLIED entity CDATA #IMPLIED entityServerSessions CDATA #IMPLIED diameterServer CDATA #IMPLIED diameterServerSessions CDATA #IMPLIED balance (yes | no) #IMPLIED sessionBasedModelsClientSocketSelection (SessionIdLowPart | SessionIdHighPart | SessionIdOptionalPart | RoundRobin) #IMPLIED retries CDATA #IMPLIED log CDATA #IMPLIED splitLog (yes | no) #IMPLIED detailedLog (yes | no) #IMPLIED dumpLog (yes | no) #IMPLIED burstLog (yes | no) #IMPLIED>
- const anna::xml::Attribute *originRealm, *appId, *originHost, *cer, *dwr, *allowedInactivityTime, *tcpConnectDelay,
- *answersTimeout, *ceaTimeout, *watchdogPeriod, *entity, *entityServerSessions,
- *diameterServer, *diameterServerSessions, *balance, *sessionBasedModelsClientSocketSelection,
- *retries, *log, *splitLog, *detailedLog, *dumpLog, *burstLog;
+ CommandLine& cl(anna::CommandLine::instantiate());
+ bool allLogsDisabled = cl.exists("disableLogs");
+
+ //<!ATTLIST stack id CDATA #REQUIRED dictionary CDATA #REQUIRED>
+ const anna::xml::Attribute *id, *dictionary;
+ // <!ATTLIST node originHost CDATA #REQUIRED applicationId CDATA #REQUIRED cer CDATA #IMPLIED dwr CDATA #IMPLIED allowedInactivityTime CDATA #IMPLIED tcpConnectDelay CDATA #IMPLIED answersTimeout CDATA #IMPLIED ceaTimeout CDATA #IMPLIED watchdogPeriod CDATA #IMPLIED entity CDATA #IMPLIED entityServerSessions CDATA #IMPLIED diameterServer CDATA #IMPLIED diameterServerSessions CDATA #IMPLIED balance (yes | no) #IMPLIED sessionBasedModelsClientSocketSelection (SessionIdLowPart | SessionIdHighPart | SessionIdOptionalPart | RoundRobin) #IMPLIED retries CDATA #IMPLIED log CDATA #IMPLIED splitLog (yes | no) #IMPLIED detailedLog (yes | no) #IMPLIED dumpLog (yes | no) #IMPLIED burstLog (yes | no) #IMPLIED>
+ const anna::xml::Attribute *originHost, *appId, *originRealm, *cer, *dwr, *cea, *allowedInactivityTime, *tcpConnectDelay,
+ *answersTimeout, *ceaTimeout, *watchdogPeriod, *entity, *entityServerSessions,
+ *diameterServer, *diameterServerSessions, *balance, *sessionBasedModelsClientSocketSelection,
+ *retries, *log, *splitLog, *detailedLog, *dumpLog, *burstLog;
// Never clear services content from here (append new data from xml). At the moment no node removing is implemented in this process
// Stacks
anna::diameter::stack::Engine &stackEngine = anna::diameter::stack::Engine::instantiate();
anna::diameter::stack::Dictionary *d;
+ const anna::diameter::stack::Dictionary *bpd = NULL; // base protocol dictionary
+
+ // Codec engine manager:
+ anna::diameter::codec::EngineManager &em = anna::diameter::codec::EngineManager::instantiate();
+ anna::diameter::codec::Engine *ce;
+
///////////////////////////////////////////
// APPLICATION MESSAGE OAM MODULE SCOPES //
///////////////////////////////////////////
anna::diameter::comm::ApplicationMessageOamModule & appMsgOamModule = anna::diameter::comm::ApplicationMessageOamModule::instantiate();
appMsgOamModule.enableCounters(); // this special module is disabled by default (the only)
static int scope_id = 3;
+ unsigned int id_value;
+ std::string codecEngineName;
for(anna::xml::Node::const_child_iterator it = servicesNode->child_begin(); it != servicesNode->child_end(); it++) {
std::string nodeName = (*it)->getName();
// Input data:
id = (*it)->getAttribute("id");
dictionary = (*it)->getAttribute("dictionary");
+ id_value = id->getIntegerValue();
+
+ if (stackEngine.getDictionary(id_value)) { // Ignore (but don't fail) dictionary load with same stack id already registered
+ LOGWARNING(anna::Logger::warning(anna::functions::asString("Ignore dictionary load for stack id already registered: %llu", id_value), ANNA_FILE_LOCATION));
+ continue;
+ }
try {
- d = stackEngine.createDictionary(id->getIntegerValue(), dictionary->getValue());
- getCodecEngine()->setDictionary(d);
+ d = stackEngine.createDictionary(id_value, dictionary->getValue());
+ LOGDEBUG(anna::Logger::debug(anna::functions::asString("Created dictionary (%p) for stack id %llu", d, id_value), ANNA_FILE_LOCATION));
// OAM module for counters:
- appMsgOamModule.createStackCounterScope(scope_id, id->getIntegerValue() /* application-id */);
+ appMsgOamModule.createStackCounterScope(scope_id, id_value /* application-id */);
scope_id++;
} catch(anna::RuntimeException &ex) {
//_exit(ex.asString());
throw ex;
}
+
+ bpd = d; // base protocol dictionary in case of monostack. If multistack, will be calculated later
+
+ // Create codec engine and register it in the codec engine manager:
+ codecEngineName = anna::functions::asString("CodecEngineForStackId_%llu", id_value);
+ ce = new anna::diameter::codec::Engine(codecEngineName.c_str(), d);
+ em.registerCodecEngine(id_value, ce);
+
+ // Codec engine configuration:
+ const anna::xml::Attribute *vm_attr = (*it)->getAttribute("validationMode", false /* no exception */);
+ const anna::xml::Attribute *vd_attr = (*it)->getAttribute("validationDepth", false /* no exception */);
+ const anna::xml::Attribute *fm_attr = (*it)->getAttribute("fixMode", false /* no exception */);
+ const anna::xml::Attribute *if_attr = (*it)->getAttribute("ignoreFlagsOnValidation", false /* no exception */);
+
+ std::string vm_value = vm_attr ? vm_attr->getValue() : "AfterDecoding";
+ std::string vd_value = vd_attr ? vd_attr->getValue() : "FirstError";
+ std::string fm_value = fm_attr ? fm_attr->getValue() : "BeforeEncoding";
+
+ anna::diameter::codec::Engine::ValidationMode::_v vm;
+ if (vm_value == "BeforeEncoding") vm = anna::diameter::codec::Engine::ValidationMode::BeforeEncoding;
+ else if (vm_value == "AfterDecoding") vm = anna::diameter::codec::Engine::ValidationMode::AfterDecoding;
+ else if (vm_value == "Always") vm = anna::diameter::codec::Engine::ValidationMode::Always;
+ else if (vm_value == "Never") vm = anna::diameter::codec::Engine::ValidationMode::Never;
+ ce->setValidationMode(vm);
+
+ anna::diameter::codec::Engine::ValidationDepth::_v vd;
+ if (vd_value == "Complete") vd = anna::diameter::codec::Engine::ValidationDepth::Complete;
+ else if (vd_value == "FirstError") vd = anna::diameter::codec::Engine::ValidationDepth::FirstError;
+ ce->setValidationDepth(vd);
+
+ anna::diameter::codec::Engine::FixMode::_v fm;
+ if (fm_value == "BeforeEncoding") fm = anna::diameter::codec::Engine::FixMode::BeforeEncoding;
+ else if (fm_value == "AfterDecoding") fm = anna::diameter::codec::Engine::FixMode::AfterDecoding;
+ else if (fm_value == "Always") fm = anna::diameter::codec::Engine::FixMode::Always;
+ else if (fm_value == "Never") fm = anna::diameter::codec::Engine::FixMode::Never;
+ ce->setFixMode(fm);
+
+ bool if_value = (if_attr ? (if_attr->getValue() == "yes") : false);
+ ce->ignoreFlagsOnValidation(if_value);
}
}
// Show loaded stacks:
std::cout << "Stacks currently loaded:" << std::endl;
- std::cout << anna::functions::tab(stackEngine.asString(false /* light */));
- std::cout << std::endl;
+ std::cout << anna::functions::tab(stackEngine.asString(false /* light */)) << std::endl;
-
- // Codec engine adjustments:
- // Auto stack selection based on Application-ID:
+ // Basic checking for multistack:
bool multistack = (stackEngine.stack_size() > 1);
- if (multistack) getCodecEngine()->selectStackWithApplicationId(true);
+ if (multistack) {
+ bpd = stackEngine.getDictionary(0);
+ if(!bpd)
+ throw anna::RuntimeException("In multistack applications is mandatory register a stack id = 0 using a dictionary which contains the needed elements to build base protocol messages (CER/A, DWR/A, DPR/A, STR/A, etc.)", ANNA_FILE_LOCATION);
+ }
+ // REALMS:
for(anna::xml::Node::const_child_iterator it = servicesNode->child_begin(); it != servicesNode->child_end(); it++) {
std::string nodeName = (*it)->getName();
if(nodeName == "node") {
// Input data:
- originRealm = (*it)->getAttribute("originRealm");
+ originHost = (*it)->getAttribute("originHost");
appId = (*it)->getAttribute("applicationId");
- originHost = (*it)->getAttribute("originHost", false /* no exception */);
+ originRealm = (*it)->getAttribute("originRealm", false /* no exception */);
cer = (*it)->getAttribute("cer", false /* no exception */);
dwr = (*it)->getAttribute("dwr", false /* no exception */);
+ cea = (*it)->getAttribute("cea", false /* no exception */);
allowedInactivityTime = (*it)->getAttribute("allowedInactivityTime", false /* no exception */);
tcpConnectDelay = (*it)->getAttribute("tcpConnectDelay", false /* no exception */);
answersTimeout = (*it)->getAttribute("answersTimeout", false /* no exception */);
burstLog = (*it)->getAttribute("burstLog", false /* no exception */); // (yes | no)
// Basic checkings:
- if (stackEngine.getDictionary(appId->getIntegerValue()) == NULL) {
- std::string msg = "Cannot found a registered stack id with the value of applicationId provided: "; msg += appId->getValue();
+ anna::diameter::comm::OriginHostManager &ohm = anna::diameter::comm::OriginHostManager::instantiate();
+ anna::diameter::comm::OriginHost *oh = ohm.getOriginHost(originHost->getValue());
+ if (oh) {
+ std::string msg = "Already registered such Origin-Host: "; msg += originHost->getValue();
throw anna::RuntimeException(msg, ANNA_FILE_LOCATION);
}
- realm_nodes_it nodeIt = a_nodes.find(originRealm->getValue());
- if (nodeIt != a_nodes.end()) {
- std::string msg = "Already registered node name (Origin-Realm): "; msg += originRealm->getValue();
+
+ unsigned int applicationId = appId->getIntegerValue();
+ if (!stackEngine.getDictionary(applicationId)) {
+ std::string msg = "Cannot found a registered stack id with the value of applicationId provided: "; msg += appId->getValue();
throw anna::RuntimeException(msg, ANNA_FILE_LOCATION);
}
// Checking command line parameters
std::string sessionBasedModelsType;
+ anna::diameter::comm::Entity::SessionBasedModelsType::_v sessionBasedModelsTypeEnum = anna::diameter::comm::Entity::SessionBasedModelsType::SessionIdLowPart;
if(sessionBasedModelsClientSocketSelection) {
sessionBasedModelsType = sessionBasedModelsClientSocketSelection->getValue();
- if((sessionBasedModelsType != "SessionIdHighPart") && (sessionBasedModelsType != "SessionIdOptionalPart") && (sessionBasedModelsType != "RoundRobin")) {
- throw anna::RuntimeException("Parameter 'sessionBasedModelsClientSocketSelection' only accepts 'SessionIdHighPart'/'SessionIdOptionalPart'/'RoundRobin' as parameter values", ANNA_FILE_LOCATION);
- }
+ if (sessionBasedModelsType == "RoundRobin") {
+ sessionBasedModelsTypeEnum = anna::diameter::comm::Entity::SessionBasedModelsType::RoundRobin;
+ }
+ else if (sessionBasedModelsType == "SessionIdOptionalPart") {
+ sessionBasedModelsTypeEnum = anna::diameter::comm::Entity::SessionBasedModelsType::SessionIdOptionalPart;
+ }
+ else if (sessionBasedModelsType == "SessionIdHighPart") {
+ sessionBasedModelsTypeEnum = anna::diameter::comm::Entity::SessionBasedModelsType::SessionIdHighPart;
+ }
+ else if (sessionBasedModelsType == "SessionIdLowPart") {
+ sessionBasedModelsTypeEnum = anna::diameter::comm::Entity::SessionBasedModelsType::SessionIdLowPart;
+ }
+ else {
+ throw anna::RuntimeException("Parameter 'sessionBasedModelsClientSocketSelection' only accepts 'SessionIdLowPart'/'SessionIdHighPart'/'SessionIdOptionalPart'/'RoundRobin' as parameter values", ANNA_FILE_LOCATION);
+ }
}
int retransmissions = retries ? retries->getIntegerValue() : 0;
throw anna::RuntimeException("Parameter 'retries' must be non-negative", ANNA_FILE_LOCATION);
}
- // Create new Node instance /////////////////////////////////////////////////////////////////
- a_workingNode = new RealmNode(originRealm->getValue(), appId->getIntegerValue(), a_codecEngine);
- MyDiameterEngine *commEngine = a_workingNode->getMyDiameterEngine();
/////////////////////////////////////////////////////////////////////////////////////////////
-
- // Assignments:
+ // Diameter communication engine:
+ std::string commEngineName = originHost->getValue() + "_DiameterCommEngine";
+ MyDiameterEngine *commEngine = new MyDiameterEngine(commEngineName.c_str(), bpd);
+ commEngine->setAutoBind(false); // allow to create client-sessions without binding them, in order to set timeouts.
commEngine->setMaxConnectionDelay(tcpConnectDelayMs);
commEngine->setWatchdogPeriod(watchdogPeriodMs);
+ commEngine->setOriginHostName(originHost->getValue());
+ if (originRealm) commEngine->setOriginRealmName(originRealm->getValue());
+
+ // Origin host node:
+ a_workingNode = new anna::diameter::comm::OriginHost((anna::diameter::comm::Engine*)commEngine, applicationId);
+ a_workingNode->setRequestRetransmissions(retransmissions);
+ /////////////////////////////////////////////////////////////////////////////////////////////
- // Realm information:
- if (originHost) commEngine->setHost(originHost->getValue());
- commEngine->setRealm(originRealm->getValue());
// Diameter entity:
if(entity) {
// Register one entity for this engine:
a_workingNode->createEntity(entity->getValue(), ceaTimeoutMs, answersTimeoutMs);
- a_workingNode->setRequestRetransmissions(retransmissions);
- a_workingNode->getEntity()->setSessionBasedModelsType(sessionBasedModelsType);
+ a_workingNode->getEntity()->setSessionBasedModelsType(sessionBasedModelsTypeEnum);
a_workingNode->getEntity()->setBalance(balance ? (balance->getValue() == "yes") : false); // for sendings
if (eventOperation) a_workingNode->getEntity()->bind();
}
// Diameter Server:
if(diameterServer) {
+ // Server CEA
+ std::string ceaPathfile = cea ? cea->getValue() : "";
+
int sessions = diameterServerSessions ? diameterServerSessions->getIntegerValue() : 1;
- a_workingNode->startDiameterServer(diameterServer->getValue(), sessions, allowedInactivityTimeMs);
+ a_workingNode->createDiameterServer(diameterServer->getValue(), sessions, allowedInactivityTimeMs, answersTimeoutMs, ceaPathfile);
}
// Logs:
- std::string realm = commEngine->getRealm();
- std::string s_log = realm + ".launcher.log"; if (log) s_log = log->getValue();
- bool b_splitLog = (splitLog ? (splitLog->getValue() == "yes") : false);
- bool b_detailedLog = (detailedLog ? (detailedLog->getValue() == "yes") : false);
- bool b_dumpLog = (dumpLog ? (dumpLog->getValue() == "yes") : false);
- std::string s_burstLog = realm + ".launcher.burst"; if (burstLog) s_burstLog = burstLog->getValue();
- a_workingNode->setLogs(s_log, b_splitLog, b_detailedLog, b_dumpLog, s_burstLog);
+ if (!allLogsDisabled) {
+ std::string host = commEngine->getOriginHostName();
+ std::string s_log = host + ".launcher.log"; if (log) s_log = log->getValue();
+ bool b_splitLog = (splitLog ? (splitLog->getValue() == "yes") : false);
+ bool b_detailedLog = (detailedLog ? (detailedLog->getValue() == "yes") : false);
+ bool b_dumpLog = (dumpLog ? (dumpLog->getValue() == "yes") : false);
+ std::string s_burstLog = host + ".launcher.burst"; if (burstLog) s_burstLog = burstLog->getValue();
+ a_workingNode->setLogs(s_log, b_splitLog, b_detailedLog, b_dumpLog, s_burstLog);
+ }
// Lazy initialization for comm engine:
if (eventOperation) commEngine->lazyInitialize();
- // New Node assignment //////////////////////////////////////////////////////////////////////
- a_nodes[originRealm->getValue()] = a_workingNode;
+ // Node and Codec Engine registration ///////////////////////////////////////////////////////
+ ohm.registerOriginHost(originHost->getValue(), a_workingNode);
/////////////////////////////////////////////////////////////////////////////////////////////
}
}
+ if (!uniqueOriginHost())
+ a_workingNode = NULL; // by default, mode auto
+
// Diameter comm engines which are loaded after application start (via management operation 'services') are not really started,
// but this don't care because application startComponents() -> initialize() -> do_initialize() -> do nothing.
// And when stopped, running state is not checked and it will be stopped anyway.
}
LOGDEBUG(
- std::string trace = "Loading ADML services file '";
- trace += xmlPathFile;
- trace += "'";
- anna::Logger::debug(trace, ANNA_FILE_LOCATION);
+ std::string trace = "Loading ADML services file '";
+ trace += xmlPathFile;
+ trace += "'";
+ anna::Logger::debug(trace, ANNA_FILE_LOCATION);
);
anna::xml::DocumentFile xmlDocument; // has private copy constructor defined but not implemented to avoid inhenrit/copy (is very heavy)
anna::xml::DTDMemory xmlDTD;
}
catch (anna::RuntimeException &ex) {
LOGWARNING(
- std::string msg = "Services DTD schema:\n\n";
- msg += ServicesDTD;
- anna::Logger::warning(msg, ANNA_FILE_LOCATION);
+ std::string msg = "Services DTD schema:\n\n";
+ msg += ServicesDTD;
+ anna::Logger::warning(msg, ANNA_FILE_LOCATION);
);
throw ex;
}
LOGDEBUG(
- std::string trace = "Loaded XML file (";
- trace += xmlPathFile;
- trace += "):\n";
- trace += anna::xml::Compiler().apply(rootNode);
- anna::Logger::debug(trace, ANNA_FILE_LOCATION);
+ std::string trace = "Loaded XML file (";
+ trace += xmlPathFile;
+ trace += "):\n";
+ trace += anna::xml::Compiler().apply(rootNode);
+ anna::Logger::debug(trace, ANNA_FILE_LOCATION);
);
servicesFromXML(rootNode, eventOperation);
}
throw RuntimeException(msg, ANNA_FILE_LOCATION);
}
-RealmNode *Launcher::getWorkingNode() const throw(anna::RuntimeException) {
+bool Launcher::setWorkingNode(const std::string &name) throw() {
+ bool result = false;
+
+ anna::diameter::comm::OriginHostManager &ohm = anna::diameter::comm::OriginHostManager::instantiate();
+ anna::diameter::comm::OriginHost *oh = ohm.getOriginHost(name);
+
+ if (oh) {
+ a_workingNode = const_cast<anna::diameter::comm::OriginHost*>(oh);
+ result = true;
+ }
+
+ return result;
+}
+
+anna::diameter::comm::OriginHost *Launcher::getOriginHost(const std::string &name) const throw(anna::RuntimeException) {
+ anna::diameter::comm::OriginHostManager &ohm = anna::diameter::comm::OriginHostManager::instantiate();
+ anna::diameter::comm::OriginHost *result = ohm.getOriginHost(name);
+
+ if (!result)
+ throw anna::RuntimeException(anna::functions::asString("There is no origin host registered as '%s' (set Origin-Host avp correctly or force a specific host with 'node' operation)", name.c_str()), ANNA_FILE_LOCATION);
+
+ return result;
+}
+
+anna::diameter::comm::OriginHost *Launcher::getOriginHost(const anna::diameter::codec::Message &message) const throw(anna::RuntimeException) {
+ std::string originHost = message.getAvp(anna::diameter::helpers::base::AVPID__Origin_Host)->getDiameterIdentity()->getValue();
+ return (getOriginHost(originHost));
+}
+
+bool Launcher::uniqueOriginHost() const throw() {
+ anna::diameter::comm::OriginHostManager &ohm = anna::diameter::comm::OriginHostManager::instantiate();
+ return (ohm.size() == 1);
+}
- if (!a_workingNode)
- throw RuntimeException("No services yet loaded. Try 'services' operation (via management interface), or restart process using command-line 'services' parameter", ANNA_FILE_LOCATION);
+
+void Launcher::updateOperatedOriginHostWithMessage(const anna::diameter::codec::Message &message) throw(anna::RuntimeException) {
+ if (!a_operatedHost) // priority for working node by mean 'node' operation
+ a_operatedHost = getOriginHost(message);
+}
+
+anna::diameter::comm::OriginHost *Launcher::getWorkingNode() const throw(anna::RuntimeException) {
+ if(!a_workingNode)
+ throw anna::RuntimeException("Working node not identified (try to load services)", ANNA_FILE_LOCATION);
return a_workingNode;
}
-bool Launcher::setWorkingNode(const std::string &name) throw() {
- bool result = false;
+anna::diameter::comm::OriginHost *Launcher::getOperatedHost() const throw(anna::RuntimeException) {
+ if(!a_operatedHost)
+ throw anna::RuntimeException("Node not identified (try to force a specific Origin-Host with 'node' operation)", ANNA_FILE_LOCATION);
- realm_nodes_nc_it nodeIt = a_nodes.find(name);
- if (nodeIt == a_nodes.end()) {
- LOGWARNING(
- std::string msg = "Unknown node with name '"; msg += name; msg += "'. Ignoring ...";
- anna::Logger::warning(msg, ANNA_FILE_LOCATION);
- );
- }
- else {
- a_workingNode = nodeIt->second;
- result = true;
- }
+ return a_operatedHost;
+}
+MyDiameterEntity *Launcher::getOperatedEntity() const throw(anna::RuntimeException) {
+ MyDiameterEntity *result = (MyDiameterEntity *)(getOperatedHost()->getEntity());
+ if (!result)
+ throw anna::RuntimeException("No entity configured for the operated node", ANNA_FILE_LOCATION);
return result;
}
-RealmNode *Launcher::getRealmNode(const std::string &realmName) const throw() {
- realm_nodes_it it = a_nodes.find(realmName);
- if (it != a_nodes.end()) return it->second;
+MyLocalServer *Launcher::getOperatedServer() const throw(anna::RuntimeException) {
+ MyLocalServer *result = (MyLocalServer *)(getOperatedHost()->getDiameterServer());
+ if (!result)
+ throw anna::RuntimeException("No local server configured for the operated node", ANNA_FILE_LOCATION);
+ return result;
+}
- return NULL; // this never happens
+MyDiameterEngine *Launcher::getOperatedEngine() const throw(anna::RuntimeException) {
+ return (MyDiameterEngine *)getOperatedHost()->getCommEngine(); // never will be NULL
}
void Launcher::initialize()
CommandLine& cl(anna::CommandLine::instantiate());
anna::comm::Communicator::WorkMode::_v workMode(anna::comm::Communicator::WorkMode::Single);
a_communicator = new MyCommunicator(workMode);
-
- //a_timeEngine = new anna::timex::Engine((anna::Millisecond)600000, anna::timex::Engine::minResolution);
- a_timeEngine = new anna::timex::Engine((anna::Millisecond)600000, (anna::Millisecond)100); // puedo bajar hasta 10
+ a_timeEngine = new anna::timex::Engine((anna::Millisecond)600000, a_admlMinResolution);
+ anna::testing::TestManager::instantiate().setTimerController(a_timeEngine);
// Counters record procedure:
const char *varname = "cntRecordPeriod";
- anna::Millisecond cntRecordPeriod = (cl.exists(varname)) ? checkTimeMeasure(varname, cl.getValue(varname)) : (anna::Millisecond)300000;
+ anna::Millisecond cntRecordPeriod;
+ try {
+ cntRecordPeriod = (cl.exists(varname)) ? checkTimeMeasure(varname, cl.getValue(varname)) : (anna::Millisecond)300000;
+ }
+ catch(anna::RuntimeException &ex) {
+ if (cntRecordPeriod != 0) throw ex;
+ }
+
if(cntRecordPeriod != 0) {
a_counterRecorderClock = new MyCounterRecorderClock("Counters record procedure clock", cntRecordPeriod); // clock
std::string cntDir = ".";
a_counterRecorder = new MyCounterRecorder(cntDir + anna::functions::asString("/Counters.Pid%d", (int)getPid()));
}
+ // Testing framework:
+ std::string tmDir = ".";
+ if(cl.exists("tmDir")) tmDir = cl.getValue("tmDir");
+ anna::testing::TestManager::instantiate().setReportsDirectory(tmDir);
+
// Tracing:
if(cl.exists("trace"))
anna::Logger::setLevel(anna::Logger::asLevel(cl.getValue("trace")));
throw(anna::RuntimeException) {
LOGMETHOD(anna::TraceMethod tm("Launcher", "run", ANNA_FILE_LOCATION));
CommandLine& cl(anna::CommandLine::instantiate());
- anna::diameter::stack::Engine &stackEngine = anna::diameter::stack::Engine::instantiate();
+ anna::diameter::stack::Engine::instantiate();
// Start time:
a_start_time.setNow();
+
+ // Initial working directory:
+ char cwd[1024];
+ if (getcwd(cwd, sizeof(cwd)) == NULL)
+ throw anna::RuntimeException("Cannot retrieve initial working directory !!", ANNA_FILE_LOCATION);
+ a_initialWorkingDirectory = cwd;
+
// Statistics:
anna::statistics::Engine::instantiate().enable();
LOGINFORMATION(
- // Help on startup traces:
- anna::Logger::information(help(), ANNA_FILE_LOCATION);
- // Test messages dtd:
- std::string msg = "\n ------------- TESTMESSAGES DTD -------------\n";
- msg += anna::diameter::codec::MessageDTD;
- anna::Logger::information(msg, ANNA_FILE_LOCATION);
+ // Test messages dtd:
+ std::string msg = "\n ------------- TESTMESSAGES DTD -------------\n";
+ msg += anna::diameter::codec::MessageDTD;
+ anna::Logger::information(msg, ANNA_FILE_LOCATION);
);
// HTTP Server:
oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentExpired, "", 55);
oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentOnClientSessionExpired, "", 56);
oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestSentOnServerSessionExpired, "", 57);
- oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceivedUnknown, "", 58);
- oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceivedOnClientSessionUnknown, "", 59);
- oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceivedOnServerSessionUnknown, "", 60);
+ oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestRetransmitted, "", 58);
+ oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestRetransmittedOnClientSession, "", 59);
+ oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::RequestRetransmittedOnServerSession, "", 60);
+ oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceivedUnknown, "", 61);
+ oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceivedOnClientSessionUnknown, "", 62);
+ oamDiameterComm.registerCounter(anna::diameter::comm::OamModule::Counter::AnswerReceivedOnServerSessionUnknown, "", 63);
//////////////////
// CODEC MODULE //
//////////////////
a_timeEngine->activate(a_counterRecorderClock); // start clock
}
-
- // Integration (validation 'Complete' for receiving messages) and debugging (validation also before encoding: 'Always').
- // If missing 'integrationAndDebugging', default behaviour at engine is: mode 'AfterDecoding', depth 'FirstError':
- if(cl.exists("integrationAndDebugging")) {
- getCodecEngine()->setValidationMode(anna::diameter::codec::Engine::ValidationMode::Always);
- getCodecEngine()->setValidationDepth(anna::diameter::codec::Engine::ValidationDepth::Complete);
- }
-
- // Fix mode
- if(cl.exists("fixMode")) { // BeforeEncoding(default), AfterDecoding, Always, Never
- std::string fixMode = cl.getValue("fixMode");
- anna::diameter::codec::Engine::FixMode::_v fm;
- if (fixMode == "BeforeEncoding") fm = anna::diameter::codec::Engine::FixMode::BeforeEncoding;
- else if (fixMode == "AfterDecoding") fm = anna::diameter::codec::Engine::FixMode::AfterDecoding;
- else if (fixMode == "Always") fm = anna::diameter::codec::Engine::FixMode::Always;
- else if (fixMode == "Never") fm = anna::diameter::codec::Engine::FixMode::Never;
- else LOGINFORMATION(anna::Logger::information("Unreconized command-line fix mode. Assumed default 'BeforeEncoding'", ANNA_FILE_LOCATION));
- getCodecEngine()->setFixMode(fm);
- }
-
- getCodecEngine()->ignoreFlagsOnValidation(cl.exists("ignoreFlags"));
-
-
- // Log statistics concepts
- if(cl.exists("logStatisticSamples")) {
- std::string list = cl.getValue("logStatisticSamples");
- anna::statistics::Engine &statEngine = anna::statistics::Engine::instantiate();
-
- if(list == "all") {
- if(statEngine.enableSampleLog(/* -1: all concepts */))
- LOGDEBUG(anna::Logger::debug("Sample log activation for all statistic concepts", ANNA_FILE_LOCATION));
- } else {
- anna::Tokenizer lst;
- lst.apply(cl.getValue("logStatisticSamples"), ",");
-
- if(lst.size() >= 1) {
- anna::Tokenizer::const_iterator tok_min(lst.begin());
- anna::Tokenizer::const_iterator tok_max(lst.end());
- anna::Tokenizer::const_iterator tok_iter;
- int conceptId;
-
- for(tok_iter = tok_min; tok_iter != tok_max; tok_iter++) {
- conceptId = atoi(anna::Tokenizer::data(tok_iter));
-
- if(statEngine.enableSampleLog(conceptId))
- LOGDEBUG(anna::Logger::debug(anna::functions::asString("Sample log activation for statistic concept id = %d", conceptId), ANNA_FILE_LOCATION));
- }
- }
- }
- }
-
+ /////////////////////////////
+ // Log statistics concepts //
+ /////////////////////////////
+ if(cl.exists("logStatisticSamples"))
+ logStatisticsSamples(cl.getValue("logStatisticSamples"));
// Start client connections //////////////////////////////////////////////////////////////////////////////////
MyDiameterEntity *entity;
- for (realm_nodes_it it = a_nodes.begin(); it != a_nodes.end(); it++) {
- entity = it->second->getEntity();
+ anna::diameter::comm::OriginHostManager &ohm = anna::diameter::comm::OriginHostManager::instantiate();
+ for (diameter::comm::origin_hosts_it it = ohm.begin(); it != ohm.end(); it++) {
+ entity = (MyDiameterEntity *)(it->second->getEntity());
if (entity) entity->bind();
}
a_communicator->accept();
}
-bool Launcher::getDataBlockFromHexFile(const std::string &pathfile, anna::DataBlock &db) const throw() {
+bool Launcher::getDataBlockFromHexFile(const std::string &pathfile, anna::DataBlock &db) const throw(anna::RuntimeException) {
// Get hex string
static char buffer[8192];
std::ifstream infile(pathfile.c_str(), std::ifstream::in);
// Allow colon separator in hex string: we have to remove them before processing with 'fromHexString':
hexString.erase(std::remove(hexString.begin(), hexString.end(), ':'), hexString.end());
LOGDEBUG(
- std::string msg = "Hex string (remove colons if exists): ";
- msg += hexString;
- anna::Logger::debug(msg, ANNA_FILE_LOCATION);
+ std::string msg = "Hex string (remove colons if exists): ";
+ msg += hexString;
+ anna::Logger::debug(msg, ANNA_FILE_LOCATION);
);
- anna::functions::fromHexString(hexString, db);
+
+ anna::functions::fromHexString(hexString, db); // could launch exception
// Close file
infile.close();
return true;
}
void Launcher::resetStatistics() throw() {
- getWorkingNode()->getMyDiameterEngine()->resetStatistics();
+ if (a_workingNode) {
+ a_workingNode->getCommEngine()->resetStatistics();
+ }
+ else {
+ anna::diameter::comm::OriginHostManager &ohm = anna::diameter::comm::OriginHostManager::instantiate();
+ for (diameter::comm::origin_hosts_it it = ohm.begin(); it != ohm.end(); it++) {
+ it->second->getCommEngine()->resetStatistics();
+ }
+ }
}
void Launcher::resetCounters() throw() {
anna::diameter::codec::OamModule::instantiate().resetCounters();
}
+void Launcher::signalTerminate() throw(anna::RuntimeException) {
+ LOGMETHOD(anna::TraceMethod tm("Launcher", "signalTerminate", ANNA_FILE_LOCATION));
+
+ forceCountersRecord();
+
+ a_communicator->terminate ();
+ comm::Application::signalTerminate ();
+}
+
void Launcher::signalUSR2() throw(anna::RuntimeException) {
+
+ std::string inputFile = getSignalUSR2InputFile();
+ std::string outputFile = getSignalUSR2OutputFile();
+
LOGNOTICE(
- std::string msg = "Captured signal SIGUSR2. Reading tasks at '";
- msg += SIGUSR2_TASKS_INPUT_FILENAME;
- msg += "' (results will be written at '";
- msg += SIGUSR2_TASKS_OUTPUT_FILENAME;
- msg += "')";
- anna::Logger::notice(msg, ANNA_FILE_LOCATION);
+ std::string msg = "Captured signal SIGUSR2. Reading tasks at '";
+ msg += inputFile;
+ msg += "' (results will be written at '";
+ msg += outputFile;
+ msg += "')";
+ anna::Logger::notice(msg, ANNA_FILE_LOCATION);
);
+
// Operation:
std::string line;
std::string response_content;
- std::ifstream in_file(SIGUSR2_TASKS_INPUT_FILENAME);
- std::ofstream out_file(SIGUSR2_TASKS_OUTPUT_FILENAME);
+ std::ifstream in_file(inputFile);
+ std::ofstream out_file(outputFile);
if(!in_file.is_open()) throw RuntimeException("Unable to read tasks", ANNA_FILE_LOCATION);
-
if(!out_file.is_open()) throw RuntimeException("Unable to write tasks", ANNA_FILE_LOCATION);
while(getline(in_file, line)) {
+
+ // Ignore comments and blank lines:
+ if (line[0] == '#') continue;
+ if (std::string::npos == line.find_first_not_of(" \t")) continue;
+
LOGDEBUG(
- std::string msg = "Processing line: ";
- msg += line;
- anna::Logger::debug(msg, ANNA_FILE_LOCATION);
+ std::string msg = "Processing line: ";
+ msg += line;
+ anna::Logger::debug(msg, ANNA_FILE_LOCATION);
);
try {
ex.trace();
}
- out_file << response_content;
+ out_file << response_content << "\n";
}
in_file.close();
+ out_file << "EOF\n";
out_file.close();
}
-std::string Launcher::help() const throw() {
- std::string result = "\n";
- result += "\n ------------- HELP -------------\n";
- result += "\n";
- result += "\nOVERVIEW";
- result += "\n--------";
- result += "\n";
- result += "\nThe ADML (ANNA Diameter Multirealm Launcher) process is a multi-realm node with client and server";
- result += "\n capabilities as well as balancer (proxy) features. It could be used as diameter server (i.e. to";
- result += "\n simulate PCRF nodes, OCS systems, etc.), as diameter client (GGSNs, DPIs, etc.), and balancer";
- result += "\n systems to provide failover to external round-robin launchers. Also, auxiliary encoder/decoder/loader";
- result += "\n function could be deployed to reinterpret certain external flow and send it to another process.";
- result += "\n ";
- result += "\nThe ANNA::diameter_comm built-in module provides a great set of characteristics as multiple connections";
- result += "\n on both server and client side, definition for multiple-server entities (and not only two as standard";
- result += "\n establish as minimum), separate statistics analyzer per each resource, automatic CER/CEA and DWR/DWA";
- result += "\n generation, expiration control and many more features.";
- result += "\n";
- result += "\nThe ADML process can easily configure a many realm nodes as needed, which will have own endpoints.";
- result += "\nYou should avoid loop configurations (client and server for that client) because automatic forwarding,";
- result += "\n is implemented and this would get in a never ending cycle when a request is sent.";
- result += "\n";
- result += "\nProcess traces are dump on \"launcher.trace\" and could have any trace level (POSIX levels), usually";
- result += "\n 'debug' or 'warning'. See ANNA documentation for more details.";
- result += "\n";
- result += "\nAs any other ANNA process, context dump could be retrieved sending SIGUSR1 signal:";
- result += "\n kill -10 <pid>";
- result += "\n or";
- result += "\n kill -s SIGUSR1 <pid>";
- result += "\n and then";
- result += "\n vi /var/tmp/anna.context.<pid>";
- result += "\n";
- result += "\nA complete xml report will show all the context information (counters, alarms, statistics,";
- result += "\n handlers, diameter stacks, etc.), and a powerful log module could dump all the events";
- result += "\n processed and flow information. Statistics could be analized at context dump and optionally";
- result += "\n written to disk as sample files (useful for graphs and spreadsheet reports) with all the";
- result += "\n measurements.";
- result += "\n";
- result += "\nAlso SIGUSR2 is handled for management purposes. We will talk later about this.";
- result += "\n";
- result += "\n";
- result += "\nCOMMAND LINE";
- result += "\n------------";
- result += "\n";
- result += "\nStart the launcher process without arguments in order to see all the startup configuration";
- result += "\n posibilities, many of which could be modified on the air through the management interface";
- result += "\n (we will talk later about this great feature). Some of the more common parameters are:";
- result += "\n";
- result += "\nAs mandatory, the stacks enabled given through the applicationId and the xml dictionary:";
- result += "\n --stacks <appid1,dictionary1#appid2,dictionary2#...#appidN,dictionaryN>";
- result += "\n";
- result += "\nActing as a diameter server (accepting i.e. 10 connections), you would have:";
- result += "\n --diameterServer localhost:3868 --diameterServerSessions 10 --entityServerSessions 0";
- result += "\n";
- result += "\nActing as a diameter client (launching i.e. 10 connections to each entity server), you would have:";
- result += "\n --entity 192.168.12.11:3868,192.168.12.21:3868 --entityServerSessions 10 --diameterServerSessions 0";
- result += "\n";
- result += "\nIf you act as a proxy or a translation agent, you need to combine both former setups, and probably";
- result += "\n will need to program the answers to be replied through the operations interface. To balance the";
- result += "\n traffic at your client side you shall use '--balance' and '--sessionBasedModelsClientSocketSelection'";
- result += "\n arguments in order to define the balancing behaviour.";
- result += "\n";
- result += "\nThe process builds automatically CER and DWR messages as a client, but you could specify your own";
- result += "\n customized ones using '--cer <xml message file>' and '--dwr <xml message file>'.";
- result += "\nThe process builds automatically CEA and DWA messages as a server, but you could program your own";
- result += "\n customized ones using operations interface.";
- result += "\n";
- result += "\n";
- result += "\nDYNAMIC OPERATIONS";
- result += "\n------------------";
- result += "\n";
- result += "\nADML supports several operations which could be reconized via HTTP interface or SIGUSR2 caugh.";
- result += "\nAn operation is specified by mean a string containing the operation name and needed arguments";
- result += "\n separated by pipes. These are the available commands:";
- result += "\n";
- result += "\n--------------------------------------------------------------------------------------- General purpose";
- result += "\n";
- result += "\nhelp This help. Startup information-level traces also dump this help.";
- result += "\n";
- result += "\n---------------------------------------------------------------------------------------- Node selection";
- result += "\n";
- result += "\nnode[|<name>] Select current working node by mean the registered name.";
- result += "\n All the subsequent operations will be referred to this node.";
- result += "\n Without argument, the current node is dumped on stdout.";
- result += "\n";
- result += "\n------------------------------------------------------------------------------------ Parsing operations";
- result += "\n";
- result += "\ncode|<source_file>|<target_file> Encodes source file (pathfile) into target file (pathfile).";
- result += "\ndecode|<source_file>|<target_file> Decodes source file (pathfile) into target file (pathfile).";
- result += "\nloadxml|<source_file> Reinterpret xml source file (pathfile).";
- result += "\n";
- result += "\n------------------------------------------------------------------------------------------- Hot changes";
- result += "\n";
- result += "\nservices[|source file] Adds and starts the services specified in the xml file provided.";
- result += "\n (if missing, the file 'services.xml' will be used).";
- result += "\n The last loaded realm node will be automatically the new current";
- result += "\n working node. This is used to load new nodes once the ADML is";
- result += "\n started, regardless if '--services' command line parameter was";
- result += "\n used or not. Those services which are not correctly loaded, will";
- result += "\n be ignored, keeping the process alive.";
- result += "\n";
- result += "\ndiameterServerSessions|<integer> Updates the maximum number of accepted connections to diameter";
- result += "\n server socket.";
- result += "\ncontext[|target file] Application context could also be written by mean this operation,";
- result += "\n and not only through SIGUSR1. If optional path file is missing,";
- result += "\n default '/var/tmp/anna.context.<pid>' will be used.";
- result += "\ncollect Reset statistics and counters to start a new test stage of";
- result += "\n performance measurement. Context data can be written at";
- result += "\n '/var/tmp/anna.context.<pid>' by mean 'kill -10 <pid>'";
- result += "\n or sending operation 'context|[target file]'.";
- result += "\nforceCountersRecord Forces dump to file the current counters of the process.";
- result += "\n";
- result += "\n<visibility action>[|<address>:<port>][|socket id]";
- result += "\n";
- result += "\n Actions: hide, show (update state) and hidden, shown (query state).";
- result += "\n Acts over a client session for messages delivery (except CER/A, DWR/A, DPR/A).";
- result += "\n If missing server (first parameter) all applications sockets will be affected.";
- result += "\n If missing socket (second parameter) for specific server, all its sockets will be affected.";
- result += "\n";
- result += "\n All application client sessions are shown on startup, but standard delivery only use primary";
- result += "\n server ones except if fails. Balance configuration use all the allowed sockets. You could also";
- result += "\n use command line 'sessionBasedModelsClientSocketSelection' to force traffic flow over certain";
- result += "\n client sessions, but for this, hide/show feature seems easier.";
- result += "\n";
- result += "\n--------------------------------------------------------------------------------------- Flow operations";
- result += "\n";
- result += "\nsendxml2e|<source_file> Sends xml source file (pathfile) through configured entity.";
- result += "\nsendxml2c|<source_file> Sends xml source file (pathfile) to client.";
- result += "\nsendxml|<source_file> Same as 'sendxml2e'.";
- result += "\nanswerxml2e[|source_file] Answer xml source file (pathfile) for incoming request with same code from entity.";
- result += "\n The answer is stored in a FIFO queue for a specific message code, then there are";
- result += "\n as many queues as different message codes have been programmed.";
- result += "\nanswerxml2c[|source_file] Answer xml source file (pathfile) for incoming request with same code from client.";
- result += "\n The answer is stored in a FIFO queue for a specific message code, then there are";
- result += "\n as many queues as different message codes have been programmed.";
- result += "\nanswerxml[|source_file] Same as 'answerxml2c'.";
- result += "\nanswerxml(2e/2c) List programmed answers (to entity/client) if no parameter provided.";
- result += "\nanswerxml(2e/2c)|dump Write programmed answers (to entity/client) to file 'programmed_answer.<message code>.<sequence>',";
- result += "\n where 'sequence' is the order of the answer in each FIFO code-queue of programmed answers.";
- result += "\nanswerxml(2e/2c)|clear Clear programmed answers (to entity/client).";
- result += "\nanswerxml(2e/2c)|exhaust Disable the corresponding queue rotation, which is the default behaviour.";
- result += "\nanswerxml(2e/2c)|rotate Enable the corresponding queue rotation, useful in performance tests.";
- result += "\n Rotation consists in add again to the queue, each element retrieved for answering.";
- result += "\n";
- result += "\nSend operations are available using hexadecimal content (hex formatted files) which also allow to test";
- result += "\nspecial scenarios (protocol errors):";
- result += "\n";
- result += "\nsendhex2e|<source_file> Sends hex source file (pathfile) through configured entity.";
- result += "\nsendhex2c|<source_file> Sends hex source file (pathfile) to client.";
- result += "\nsendhex|<source_file> Same as 'sendhex2e'.";
- result += "\n";
- result += "\nAnswer programming in hexadecimal is not really neccessary (you could use send primitives) and also";
- result += "\n is intended to be used with decoded messages in order to replace things like hop by hop, end to end,";
- result += "\n subscriber id, session id, etc. Anyway you could use 'decode' operation and then program the xml created.";
- result += "\n";
- result += "\nIf a request is received, answer map (built with 'answerxml<[2c] or 2e>' operations) will be";
- result += "\n checked to find a corresponding programmed answer to be replied(*). If no ocurrence is found,";
- result += "\n or answer message was received, the message is forwarded to the other side (entity or client),";
- result += "\n or nothing but trace when no peer at that side is configured. Answer to client have sense when";
- result += "\n diameter server socket is configured, answer to entity have sense when entity does.";
- result += "\n";
- result += "\nIn the most complete situation (process with both client and server side) there are internally";
- result += "\n two maps with N FIFO queues, one for each different message code within programmed answers.";
- result += "\nOne map is for answers towards the client, and the other is to react entity requests. Then in";
- result += "\n each one we could program different answers corresponding to different request codes received.";
- result += "\n";
- result += "\n(*) sequence values (hop-by-hop and end-to-end), Session-Id and Subscription-Id avps, are mirrored";
- result += "\n to the peer which sent the request. If user wants to test a specific answer without changing it,";
- result += "\n use sendxml/sendhex operations better than programming.";
- result += "\n";
- result += "\nBalance ('--balance' command line parameter) could be used to forward server socket receptions through";
- result += "\n entity servers by mean a round-robin algorithm. Both diameter server socket and entity targets should";
- result += "\n have been configured, that is to say: launcher acts as client and server. If no balance is used, an";
- result += "\n standard delivery is performed: first primary entity server, secondary when fails, etc.";
- result += "\n";
- result += "\n--------------------------------------------------------------------------- Processing types (log tags)";
- result += "\n";
- result += "\nUsed as log file extensions (when '--splitLog' is provided on command line) and context preffixes on log";
- result += "\n details when unique log file is dumped:";
- result += "\n";
- result += "\n [sent2e/send2eError] Send to entity (success/error)";
- result += "\n [sent2c/send2cError] Send to client (success/error)";
- result += "\n [fwd2e/fwd2eError] Forward to entity a reception from client (success/error)";
- result += "\n [fwd2c/fwd2cError] Forward to client a reception from entity (success/error)";
- result += "\n [recvfc] Reception from client";
- result += "\n [recvfe] Reception from entity";
- result += "\n [req2c-expired] A request sent to client has been expired";
- result += "\n [req2e-expired] A request sent to entity has been expired";
- result += "\n [recvfc-ans-unknown] Reception from client of an unknown answer (probably former [req2c-expired]";
- result += "\n has been logged)";
- result += "\n [recvfe-ans-unknown] Reception from entity of an unknown answer (probably former [req2e-expired]";
- result += "\n has been logged)";
- result += "\n [retry] Request retransmission";
- result += "\n";
- result += "\n-------------------------------------------------------------------------------------------- Load tests";
- result += "\n";
- result += "\nburst|<action>[|parameter] Used for performance testing, we first program diameter requests";
- result += "\n messages in order to launch them from client side to the configured";
- result += "\n diameter entity. We could start the burst with an initial load";
- result += "\n (non-asynchronous sending), after this, a new request will be sent";
- result += "\n per answer received or expired context. There are 10 actions: clear,";
- result += "\n load, start, push, pop, stop, repeat, send, goto and look.";
- result += "\n";
- result += "\n burst|clear Clears all loaded burst messages.";
- result += "\n burst|load|<source_file> Loads the next diameter message into launcher burst.";
- result += "\n burst|start|<initial load> Starts (or restarts if already in progress) the message sending with";
- result += "\n a certain initial load.";
- result += "\n burst|push|<load amount> Sends specific non-aynchronous load.";
- result += "\n burst|pop|<release amount> Skip send burst messages in order to reduce over-the-air requests.";
- result += "\n Popping all OTA requests implies burst stop because no more answer";
- result += "\n will arrive to the process. Burst output file (--burstLog command";
- result += "\n line parameter) shows popped messages with crosses (x). Each cross";
- result += "\n represents one received answer for which no new request is sent.";
- result += "\n burst|stop Stops the burst cycle. You can resume pushing 1 load amount.";
- result += "\n burst|repeat[|[yes]|no] Restarts the burst launch when finish. If initial load or push load";
- result += "\n amount is greater than burst list size, they will be limited when";
- result += "\n the list is processed except when repeat mode is enabled.";
- result += "\n burst|send|<amount> Sends messages from burst list. The main difference with start/push";
- result += "\n operations is that burst won't be awaken. Externally we could control";
- result += "\n sending time (no request will be sent for answers).";
- result += "\n burst|goto|<order> Updates current burst pointer position.";
- result += "\n burst|look|<order> Show programmed burst message for order provided.";
- result += "\n";
- result += "\n";
- result += "\nUSING OPERATIONS INTERFACE";
- result += "\n--------------------------";
- result += "\n";
- result += "\n------------------------------------------------------------------------- Operations via HTTP interface";
- result += "\n";
- result += "\nAll the operations described above can be used through the optional HTTP interface. You only have";
- result += "\n to define the http server at the command line with something like: '--httpServer localhost:9000'.";
- result += "\nTo send the task, we shall build the http request body with the operation string. Some examples";
- result += "\n using curl client could be:";
- result += "\n";
- result += "\n curl -m 1 --data \"diameterServerSessions|4\" localhost:9000";
- result += "\n curl -m 1 --data \"code|ccr.xml\" localhost:9000";
- result += "\n curl -m 1 --data \"decode|ccr.hex\" localhost:9000";
- result += "\n curl -m 1 --data \"sendxml2e|ccr.xml\" localhost:9000";
- result += "\n etc.";
- result += "\n";
- result += "\n------------------------------------------------------------------------- Operations via SIGUSR2 signal";
- result += "\n";
- result += "\nThe alternative using SIGUSR2 signal requires the creation of the task(s) file which will be read at";
- result += "\n signal event:";
- result += "\n echo \"<<operation>\" > "; result += SIGUSR2_TASKS_INPUT_FILENAME;
- result += "\n then";
- result += "\n kill -12 <pid>";
- result += "\n or";
- result += "\n kill -s SIGUSR2 <pid>";
- result += "\n and then see the results:";
- result += "\n cat "; result += SIGUSR2_TASKS_OUTPUT_FILENAME;
- result += "\n";
- result += "\nYou could place more than one line (task) in the input file. Output reports will be appended in that";
- result += "\n case over the output file. Take into account that all the content of the task file will be executed";
- result += "\n sinchronously by the process. If you are planning traffic load, better use the asynchronous http";
- result += "\n interface.";
- result += "\n";
- result += "\n";
- return result;
+
+void Launcher::logStatisticsSamples(const std::string &conceptsList) throw() {
+ anna::statistics::Engine &statEngine = anna::statistics::Engine::instantiate();
+
+ if(conceptsList == "all") {
+ if(statEngine.enableSampleLog(/* -1: all concepts */))
+ LOGDEBUG(anna::Logger::debug("Sample log activation for all statistic concepts", ANNA_FILE_LOCATION));
+ }
+ else if(conceptsList == "none") {
+ if(statEngine.disableSampleLog(/* -1: all concepts */))
+ LOGDEBUG(anna::Logger::debug("Sample log deactivation for all statistic concepts", ANNA_FILE_LOCATION));
+ } else {
+ anna::Tokenizer lst;
+ lst.apply(conceptsList, ",");
+
+ if(lst.size() >= 1) {
+ anna::Tokenizer::const_iterator tok_min(lst.begin());
+ anna::Tokenizer::const_iterator tok_max(lst.end());
+ anna::Tokenizer::const_iterator tok_iter;
+ int conceptId;
+
+ for(tok_iter = tok_min; tok_iter != tok_max; tok_iter++) {
+ conceptId = atoi(anna::Tokenizer::data(tok_iter));
+
+ if(statEngine.enableSampleLog(conceptId))
+ LOGDEBUG(anna::Logger::debug(anna::functions::asString("Sample log activation for statistic concept id = %d", conceptId), ANNA_FILE_LOCATION));
+ }
+ }
+ }
}
-void Launcher::eventOperation(const std::string &operation, std::string &response_content) throw(anna::RuntimeException) {
+
+bool Launcher::eventOperation(const std::string &operation, std::string &response_content) throw(anna::RuntimeException) {
+
+ bool result = true;
+
LOGMETHOD(anna::TraceMethod tm("Launcher", "eventOperation", ANNA_FILE_LOCATION));
- CommandLine& cl(anna::CommandLine::instantiate());
- LOGDEBUG(anna::Logger::debug(operation, ANNA_FILE_LOCATION));
- response_content = "Operation processed with exception. See traces\n"; // supposed
- std::string result = "";
+ if (operation == "") return result; // ignore
+ LOGDEBUG(anna::Logger::debug(anna::functions::asString("Operation: %s", operation.c_str()), ANNA_FILE_LOCATION));
+
+ // Default response:
+ response_content = "Operation processed with exception: ";
+ response_content += operation;
+ std::string opt_response_content = ""; // aditional response content
anna::DataBlock db_aux(true);
- anna::diameter::codec::Message codecMsg(getCodecEngine());
+ anna::diameter::codec::Message codecMsg; // auxiliary codec message
+
+ // Singletons:
+ anna::testing::TestManager &testManager = anna::testing::TestManager::instantiate();
+
///////////////////////////////////////////////////////////////////
// Simple operations without arguments:
- // Help:
- if(operation == "help") {
- std::string s_help = help();
- std::cout << s_help << std::endl;
- LOGINFORMATION(anna::Logger::information(s_help, ANNA_FILE_LOCATION));
- response_content = "Help dumped on stdout and information-level traces (launcher.trace file)\n";
- return;
+ // Dynamic operation:
+ if(operation.find("dynamic") == 0) {
+ Procedure p(this);
+ int op_size = operation.size();
+ std::string args = ((operation.find("dynamic|") == 0) && (op_size > 8)) ? operation.substr(8) : "";
+ if (args == "" && op_size != 7)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ try {
+ p.execute(args, response_content);
+ }
+ catch(anna::RuntimeException &ex) {
+ ex.trace();
+ response_content = ex.asString();
+ return false;
+ }
+ return true; // OK
}
// Reset performance data:
if(operation == "collect") {
resetCounters();
resetStatistics();
- response_content = "All process counters & statistic information have been reset\n";
- return;
+ response_content = "All process counters & statistic information have been reset";
+ return true; // OK
}
// Counters dump on demand:
if(operation == "forceCountersRecord") {
forceCountersRecord();
- response_content = "Current counters have been dump to disk\n";
- return;
+ response_content = "Current counters have been dump to disk";
+ return true; // OK
+ }
+
+ // OAM & statistics:
+ if(operation == "show-oam") {
+ anna::xml::Node root("root");
+ response_content = anna::xml::Compiler().apply(oamAsXML(&root));
+ return true; // OK
+ }
+ if(operation == "show-stats") {
+ anna::xml::Node root("root");
+ response_content = anna::xml::Compiler().apply(statsAsXML(&root));
+ return true; // OK
}
///////////////////////////////////////////////////////////////////
// Tokenize operation
Tokenizer params;
- params.apply(operation, "|");
+ params.apply(operation, "|", "<null>" /* allow contiguous separators */);
int numParams = params.size() - 1;
- // No operation has more than 2 arguments ...
- if(numParams > 2) {
- LOGWARNING(anna::Logger::warning(help(), ANNA_FILE_LOCATION));
- throw anna::RuntimeException("Wrong body content format on HTTP Request", ANNA_FILE_LOCATION);
- }
-
- // Get the operation type:
+ // Get the operation type and parameters:
Tokenizer::const_iterator tok_iter = params.begin();
std::string opType = Tokenizer::data(tok_iter);
+ std::string param1, param2, param3, param4, param5, param6, param7, param8, param9, param10, param11;
+ if(numParams >= 1) { tok_iter++; param1 = Tokenizer::data(tok_iter); }
+ if(numParams >= 2) { tok_iter++; param2 = Tokenizer::data(tok_iter); }
+ if(numParams >= 3) { tok_iter++; param3 = Tokenizer::data(tok_iter); }
+ // Tests conditions
+ if(numParams >= 4) { tok_iter++; param4 = Tokenizer::data(tok_iter); }
+ if(numParams >= 5) { tok_iter++; param5 = Tokenizer::data(tok_iter); }
+ if(numParams >= 6) { tok_iter++; param6 = Tokenizer::data(tok_iter); }
+ if(numParams >= 7) { tok_iter++; param7 = Tokenizer::data(tok_iter); }
+ if(numParams >= 8) { tok_iter++; param8 = Tokenizer::data(tok_iter); }
+ if(numParams >= 9) { tok_iter++; param9 = Tokenizer::data(tok_iter); }
+ if(numParams >= 10) { tok_iter++; param10 = Tokenizer::data(tok_iter); }
+ if(numParams >= 11) { tok_iter++; param11 = Tokenizer::data(tok_iter); }
+ // Remove '<null>' artificial token to ease further checkings:
+ if (param1 == "<null>") param1 = "";
+ if (param2 == "<null>") param2 = "";
+ if (param3 == "<null>") param3 = "";
+ if (param4 == "<null>") param4 = "";
+ if (param5 == "<null>") param5 = "";
+ if (param6 == "<null>") param6 = "";
+ if (param7 == "<null>") param7 = "";
+ if (param8 == "<null>") param8 = "";
+ if (param9 == "<null>") param9 = "";
+ if (param10 == "<null>") param10 = "";
+ if (param11 == "<null>") param11 = "";
+
+ // No operation has more than 2 arguments except 'test' ...
+ if(opType != "test" && numParams > 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+
// Check the number of parameters:
bool wrongBody = false;
+ if((opType == "change-dir") && (numParams > 1)) wrongBody = true;
+ if((opType == "log-statistics-samples") && (numParams != 1)) wrongBody = true;
if((opType == "node") && (numParams > 1)) wrongBody = true;
+ if((opType == "node_auto") && (numParams > 0)) wrongBody = true;
+
if(((opType == "code") || (opType == "decode")) && (numParams != 2)) wrongBody = true;
- if(((opType == "sendxml") || (opType == "sendxml2e") || (opType == "sendhex") || (opType == "sendhex2e")) && (numParams != 1)) wrongBody = true;
+ if(((opType == "sendxml2e") || (opType == "sendhex2e")) && (numParams != 1)) wrongBody = true;
if((opType == "burst") && (numParams < 1)) wrongBody = true;
+ if((opType == "test") && (numParams < 1)) wrongBody = true;
+
if(((opType == "sendxml2c") || (opType == "sendhex2c") || (opType == "loadxml") || (opType == "diameterServerSessions")) && (numParams != 1)) wrongBody = true;
if(wrongBody) {
// Launch exception
std::string msg = "Wrong body content format on HTTP Request for '";
msg += opType;
- msg += "' operation (missing parameter/s)";
+ msg += "' operation (missing parameter/s). Check 'HELP.md' for more information.";
throw anna::RuntimeException(msg, ANNA_FILE_LOCATION);
}
- // All seems ok:
- std::string param1, param2;
-
- if(numParams >= 1) { tok_iter++; param1 = Tokenizer::data(tok_iter); }
-
- if(numParams == 2) { tok_iter++; param2 = Tokenizer::data(tok_iter); }
-
// Operations:
if(opType == "context") {
std::string contextFile = ((numParams == 1) ? param1 : anna::functions::asString("/var/tmp/anna.context.%05d", getPid()));
writeContext(contextFile);
- response_content = anna::functions::asString("Context dumped on file '%s'\n", contextFile.c_str());
- return;
+ response_content = anna::functions::asString("Context dumped on file '%s'", contextFile.c_str());
+ return true; // OK
+ }
+
+ if(opType == "log-statistics-samples") {
+ logStatisticsSamples(param1);
+ response_content = anna::functions::asString("Log statistics samples for '%s' concepts", param1.c_str());
+ return true; // OK
+ }
+
+ // Change execution directory:
+ if(opType == "change-dir") {
+ if (param1 == "") param1 = a_initialWorkingDirectory;
+ result = (chdir(param1.c_str()) == 0);
+
+ if (result)
+ response_content = "New execution directory configured: ";
+ else
+ response_content = "Cannot assign provided execution directory: ";
+
+ response_content += param1;
+ return result;
}
if(opType == "services") {
}
catch(anna::RuntimeException &ex) {
ex.trace();
- response_content = anna::functions::asString("Loaded services from file '%s' with some problems (ignored ones)\n", servicesFile.c_str());
- return;
+ response_content = anna::functions::asString("Loaded services from file '%s' with errors", servicesFile.c_str());
+ return false;
}
- response_content = anna::functions::asString("Loaded services from file '%s'\n", servicesFile.c_str());
- return;
+ response_content = anna::functions::asString("Loaded services from file '%s'", servicesFile.c_str());
+ return true; // OK
}
- // Realm switch:
+ // Host switch:
if(opType == "node") {
if (param1 != "") {
- if (setWorkingNode(param1)) response_content = anna::functions::asString("Current node is now '%s'\n", param1.c_str());
+ if (setWorkingNode(param1)) response_content = anna::functions::asString("Forced node is now '%s'", param1.c_str());
}
else {
- std::cout << getWorkingNode()->asXMLString() << std::endl;
+ if (a_workingNode) {
+ response_content = "Working node is forced to be: \n\n";
+ response_content += a_workingNode->asXMLString();
+ }
+ else {
+ response_content = "Working node is automatic";
+ }
}
- return;
+ return true; // OK
+ }
+ if(opType == "node_auto") {
+ a_workingNode = NULL;
+ response_content = "Working node has been set to automatic";
+ return true; // OK
}
- // Diameter endpoints:
- MyDiameterEntity *entity = getWorkingNode()->getEntity();
- MyDiameterEngine *commEngine = getWorkingNode()->getMyDiameterEngine();
- MyLocalServer *localServer = getWorkingNode()->getDiameterServer();
+ // Operated host from possible forced-working node:
+ a_operatedHost = a_workingNode ? a_workingNode /* priority */: NULL /* auto */;
+ // Use later:
+ // If any message is managed: updateOperatedOriginHostWithMessage(codecMessage)
+ // To operate, use the exception-protected methods which never will return NULL:
+ // getOperatedHost(), getOperatedEntity(), getOperatedServer(), getOperatedEngine()
if(opType == "code") {
- codecMsg.loadXML(param1);
+ codecMsg.loadXMLFile(param1);
std::string hexString = anna::functions::asHexString(codecMsg.code());
// write to outfile
std::ofstream outfile(param2.c_str(), std::ifstream::out);
outfile.write(xmlString.c_str(), xmlString.size());
outfile.close();
} else if((opType == "hide") || (opType == "show") || (opType == "hidden") || (opType == "shown")) {
- if(!entity) throw anna::RuntimeException("No entity configured to send messages", ANNA_FILE_LOCATION);
if(param1 != "") {
if(param2 != "") {
key += "|";
key += param2;
- if(opType == "hide") commEngine->findClientSession(key)->hide();
+ if(opType == "hide") getOperatedEngine()->findClientSession(key)->hide();
- if(opType == "show") commEngine->findClientSession(key)->show();
+ if(opType == "show") getOperatedEngine()->findClientSession(key)->show();
- if(opType == "hidden") result = commEngine->findClientSession(key)->hidden() ? "true" : "false";
+ if(opType == "hidden") opt_response_content = getOperatedEngine()->findClientSession(key)->hidden() ? "true" : "false";
- if(opType == "shown") result = commEngine->findClientSession(key)->shown() ? "true" : "false";
+ if(opType == "shown") opt_response_content = getOperatedEngine()->findClientSession(key)->shown() ? "true" : "false";
} else {
std::string address;
int port;
anna::functions::getAddressAndPortFromSocketLiteral(param1, address, port);
- if(opType == "hide") commEngine->findServer(address, port)->hide();
+ if(opType == "hide") getOperatedEngine()->findServer(address, port)->hide();
- if(opType == "show") commEngine->findServer(address, port)->show();
+ if(opType == "show") getOperatedEngine()->findServer(address, port)->show();
- if(opType == "hidden") result = commEngine->findServer(address, port)->hidden() ? "true" : "false";
+ if(opType == "hidden") opt_response_content = getOperatedEngine()->findServer(address, port)->hidden() ? "true" : "false";
- if(opType == "shown") result = commEngine->findServer(address, port)->shown() ? "true" : "false";
+ if(opType == "shown") opt_response_content = getOperatedEngine()->findServer(address, port)->shown() ? "true" : "false";
}
} else {
- if(opType == "hide") entity->hide();
+ if(opType == "hide") getOperatedEntity()->hide();
- if(opType == "show") entity->show();
+ if(opType == "show") getOperatedEntity()->show();
- if(opType == "hidden") result = entity->hidden() ? "true" : "false";
+ if(opType == "hidden") opt_response_content = getOperatedEntity()->hidden() ? "true" : "false";
- if(opType == "shown") result = entity->shown() ? "true" : "false";
+ if(opType == "shown") opt_response_content = getOperatedEntity()->shown() ? "true" : "false";
}
- } else if((opType == "sendxml") || (opType == "sendxml2e") || (opType == "sendhex") || (opType == "sendhex2e")) {
- if(!entity) throw anna::RuntimeException("No entity configured to send the message", ANNA_FILE_LOCATION);
- anna::diameter::comm::Message *msg = getWorkingNode()->createCommMessage();
+ } else if((opType == "sendxml2e") || (opType == "sendhex2e")) {
+ anna::diameter::comm::Message *msg;
- if((opType == "sendxml") || (opType == "sendxml2e")) {
- codecMsg.loadXML(param1);
+ if(opType == "sendxml2e") {
+ codecMsg.loadXMLFile(param1);
+ updateOperatedOriginHostWithMessage(codecMsg);
+ msg = getOperatedHost()->createCommMessage();
msg->clearBody();
try { codecMsg.valid(); } catch(anna::RuntimeException &ex) { ex.trace(); } // at least we need to see validation errors although it will continue sending (see validation mode configured in launcher)
-
msg->setBody(codecMsg.code());
} else {
// Get DataBlock from file with hex content:
if(!getDataBlockFromHexFile(param1, db_aux))
throw anna::RuntimeException("Error reading hex file provided", ANNA_FILE_LOCATION);
-
+ msg = getOperatedHost()->createCommMessage();
msg->setBody(db_aux);
+ try { if(getOperatedHost()->logEnabled()) codecMsg.decode(db_aux); } catch(anna::RuntimeException &ex) { ex.trace(); }
}
- bool success = entity->send(msg, cl.exists("balance"));
- getWorkingNode()->releaseCommMessage(msg);
+ bool success = getOperatedEntity()->send(msg);
+ getOperatedHost()->releaseCommMessage(msg);
// Detailed log:
- if(getWorkingNode()->logEnabled()) {
- anna::diameter::comm::Server *usedServer = entity->getLastUsedResource();
+ if(getOperatedHost()->logEnabled()) {
+ anna::diameter::comm::Server *usedServer = getOperatedEntity()->getLastUsedResource();
anna::diameter::comm::ClientSession *usedClientSession = usedServer ? usedServer->getLastUsedResource() : NULL;
- std::string detail = usedClientSession ? usedClientSession->asString() : "<null client session>"; // esto no deberia ocurrir
- getWorkingNode()->writeLogFile(codecMsg, (success ? "sent2e" : "send2eError"), detail);
+ std::string detail = usedClientSession ? usedClientSession->asString() : "<null client session>"; // shouldn't happen
+ getOperatedHost()->writeLogFile(codecMsg, (success ? "sent2e" : "send2eError"), detail);
}
} else if((opType == "burst")) {
- if(!entity) throw anna::RuntimeException("No entity configured to use burst feature", ANNA_FILE_LOCATION);
+
+ if (!uniqueOriginHost())
+ throw anna::RuntimeException("Burst category operations are only allowed in single host node configuration. This is only to simplify user experience.", ANNA_FILE_LOCATION);
// burst|clear clears all loaded burst messages.
// burst|load|<source_file> loads the next diameter message into launcher burst.
// Externally we could control sending time (no request
// will be sent for answers).
// burst|goto|<order> Updates current burst pointer position.
- // burst|look|<order> Show programmed burst message for order provided.
+ // burst|look|<order> Show programmed burst message for order provided, current when missing.
if(param1 == "clear") {
- result = "Removed ";
- result += anna::functions::asString(getWorkingNode()->clearBurst());
- result += " elements.";
+ opt_response_content = "removed ";
+ opt_response_content += anna::functions::asString(getOperatedHost()->clearBurst());
+ opt_response_content += " elements";
} else if(param1 == "load") {
if(param2 == "") throw anna::RuntimeException("Missing xml path file for burst load operation", ANNA_FILE_LOCATION);
- codecMsg.loadXML(param2);
-
+ codecMsg.loadXMLFile(param2);
if(codecMsg.isAnswer()) throw anna::RuntimeException("Cannot load diameter answers for burst feature", ANNA_FILE_LOCATION);
try { codecMsg.valid(); } catch(anna::RuntimeException &ex) { ex.trace(); } // at least we need to see validation errors although it will continue loading (see validation mode configured in launcher)
- int position = getWorkingNode()->loadBurstMessage(codecMsg.code());
- result = "Loaded '";
- result += param2;
- result += "' file into burst list position ";
- result += anna::functions::asString(position);
+ int position = getOperatedHost()->loadBurstMessage(codecMsg.code());
+ opt_response_content = "loaded '";
+ opt_response_content += param2;
+ opt_response_content += "' file into burst list position ";
+ opt_response_content += anna::functions::asString(position);
} else if(param1 == "start") {
if(param2 == "") throw anna::RuntimeException("Missing initial load for burst start operation", ANNA_FILE_LOCATION);
int initialLoad = atoi(param2.c_str());
- int processed = getWorkingNode()->startBurst(initialLoad);
+ int processed = getOperatedHost()->startBurst(initialLoad);
if(processed > 0) {
- result = "Initial load completed for ";
- result += anna::functions::entriesAsString(processed, "message");
- result += ".";
+ opt_response_content = "initial load completed for ";
+ opt_response_content += anna::functions::entriesAsString(processed, "message");
}
} else if(param1 == "push") {
if(param2 == "") throw anna::RuntimeException("Missing load amount for burst push operation", ANNA_FILE_LOCATION);
- int pushed = getWorkingNode()->pushBurst(atoi(param2.c_str()));
+ int pushed = getOperatedHost()->pushBurst(atoi(param2.c_str()));
if(pushed > 0) {
- result = "Pushed ";
- result += anna::functions::entriesAsString(pushed, "message");
- result += ".";
+ opt_response_content = "pushed ";
+ opt_response_content += anna::functions::entriesAsString(pushed, "message");
}
} else if(param1 == "pop") {
if(param2 == "") throw anna::RuntimeException("Missing amount for burst pop operation", ANNA_FILE_LOCATION);
int releaseLoad = atoi(param2.c_str());
- int popped = getWorkingNode()->popBurst(releaseLoad);
+ int popped = getOperatedHost()->popBurst(releaseLoad);
if(popped > 0) {
- result = "Burst popped for ";
- result += anna::functions::entriesAsString(popped, "message");
- result += ".";
+ opt_response_content = "burst popped for ";
+ opt_response_content += anna::functions::entriesAsString(popped, "message");
}
} else if(param1 == "stop") {
- int left = getWorkingNode()->stopBurst();
+ int left = getOperatedHost()->stopBurst();
if(left != -1) {
- result += anna::functions::entriesAsString(left, "message");
- result += " left to the end of the cycle.";
+ opt_response_content += anna::functions::entriesAsString(left, "message");
+ opt_response_content += " left to the end of the cycle";
}
} else if(param1 == "repeat") {
if(param2 == "") param2 = "yes";
bool repeat = (param2 == "yes");
- getWorkingNode()->repeatBurst(repeat);
- result += (repeat ? "Mode on." : "Mode off.");
+ getOperatedHost()->repeatBurst(repeat);
+ opt_response_content += (repeat ? "repeat enabled" : "repeat disabled");
} else if(param1 == "send") {
if(param2 == "") throw anna::RuntimeException("Missing amount for burst send operation", ANNA_FILE_LOCATION);
- int sent = getWorkingNode()->sendBurst(atoi(param2.c_str()));
+ int sent = getOperatedHost()->sendBurst(atoi(param2.c_str()));
if(sent > 0) {
- result = "Sent ";
- result += anna::functions::entriesAsString(sent, "message");
- result += ".";
+ opt_response_content = "sent ";
+ opt_response_content += anna::functions::entriesAsString(sent, "message");
}
} else if(param1 == "goto") {
if(param2 == "") throw anna::RuntimeException("Missing order position for burst goto operation", ANNA_FILE_LOCATION);
- result = getWorkingNode()->gotoBurst(atoi(param2.c_str()));
- result += ".";
+ opt_response_content = getOperatedHost()->gotoBurst(atoi(param2.c_str()));
} else if(param1 == "look") {
- if(param2 == "") throw anna::RuntimeException("Missing order position for burst look operation", ANNA_FILE_LOCATION);
-
- result = "\n\n";
- result += getWorkingNode()->lookBurst(atoi(param2.c_str()));
- result += "\n\n";
+ int order = ((param2 != "") ? atoi(param2.c_str()) : -1);
+ opt_response_content = "\n\n";
+ opt_response_content += getOperatedHost()->lookBurst(order);
} else {
- throw anna::RuntimeException("Wrong body content format on HTTP Request for 'burst' operation (unexpected action parameter). See help", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request for 'burst' operation (unexpected action parameter). Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ }
+
+ } else if((opType == "test")) {
+ // test|<id>|<command>[|parameters] Add a new step to the test case ...
+ // test|ttps|<amount> Starts/resume the provided number of time ticks per second (ttps). The ADML starts ...
+ // test|next[|<sync-amount>] Forces the execution of the next test case(s) without waiting for test manager tick ...
+ // test|ip-limit[|amount] In-progress limit of test cases. No new test cases will be launched over this value ...
+ // test|repeats|<amount> Restarts the whole programmed test list when finished the amount number of times ...
+ // test|report|<initialized/in-progress/failed/success/[all]/none>[|[yes]|no]
+ // Enables/disables report generation for a certain test case state: initialized, in-progress ...
+ // test|report-hex[|[yes]|no] Reports could include the diameter messages in hexadecimal format. Disabled by default.
+ // test|goto|<id> Updates current test pointer position.
+ // test|look[|id] Show programmed test case for id provided, current when missing ...
+ // test|state[|id] Show test case state for id provided, current when missing ...
+ // test|interact|amount|id Makes interactive a specific test case id. The amount is the margin of execution steps ...
+ // test|reset|<[soft]/hard>[|id] Reset the test case for id provided, all the tests when missing ...
+ // test|auto-reset|<soft|hard> When cycling, current test cases can be soft (default) or hard reset ...
+ // test|clear Clears all the programmed test cases.
+ // test|summary Test manager general report (number of test cases, counts by state ...
+
+
+ if(param1 == "ttps") {
+ if (numParams > 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ bool success = ((param2 != "") ? testManager.configureTTPS(atoi(param2.c_str())) : false);
+ if (success) {
+ opt_response_content = "assigned new test launch rate to ";
+ opt_response_content += anna::functions::asString(atoi(param2.c_str()));
+ opt_response_content += " events per second";
+ }
+ else {
+ opt_response_content += "unable to configure the test rate provided";
+ }
+ }
+ else if (param1 == "next") {
+ if (numParams > 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ int sync_amount = ((param2 != "") ? atoi(param2.c_str()) : 1);
+
+ if (sync_amount < 1)
+ throw anna::RuntimeException("The parameter 'sync-amount' must be a positive integer value", ANNA_FILE_LOCATION);
+
+ bool success = testManager.execTestCases(sync_amount);
+
+ opt_response_content = (success ? "" : "not completely " /* completed cycle and no repeats, rare case */);
+ opt_response_content += "processed ";
+ opt_response_content += anna::functions::asString(sync_amount);
+ opt_response_content += ((sync_amount > 1) ? " test cases synchronously" : " test case");
+ }
+ else if(param1 == "ip-limit") {
+ if (numParams > 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ unsigned int limit;
+ if (param2 != "") {
+ limit = atoi(param2.c_str());
+ testManager.setInProgressLimit(limit);
+ opt_response_content = "new in-progress limit: ";
+ opt_response_content += (limit != UINT_MAX) ? anna::functions::asString(limit) : "<no limit>";
+ }
+ else {
+ opt_response_content = "in-progress limit amount: ";
+ limit = testManager.getInProgressLimit();
+ opt_response_content += (limit != UINT_MAX) ? anna::functions::asString(limit) : "<no limit>";
+ opt_response_content += "; currently there are ";
+ opt_response_content += anna::functions::asString(testManager.getInProgressCount());
+ opt_response_content += " test cases running";
+ }
+ }
+ else if(param1 == "repeats") {
+ if (numParams != 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ int repeats = atoi(param2.c_str());
+ if (repeats < 0) repeats = -1;
+ testManager.setPoolRepeats(repeats);
+ std::string nolimit = (repeats != -1) ? "":" [no limit]";
+ opt_response_content += anna::functions::asString("Pool repeats: %d%s (current cycle: %d)", repeats, nolimit.c_str(), testManager.getPoolCycle());
+ }
+ else if(param1 == "report") {
+ if (numParams > 3)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ if(param2 == "") param2 = "all";
+ if(param3 == "") param3 = "yes";
+ bool enable = (param3 == "yes");
+
+ if(param2 == "initialized")
+ testManager.setDumpInitializedReports(enable);
+ else if(param2 == "in-progress")
+ testManager.setDumpInProgressReports(enable);
+ else if(param2 == "failed")
+ testManager.setDumpFailedReports(enable);
+ else if(param2 == "success")
+ testManager.setDumpSuccessReports(enable);
+ else if(param2 == "all") {
+ param2 = "any";
+ testManager.setDumpAllReports(enable);
+ }
+ else if(param2 == "none") {
+ enable = !enable;
+ param2 = "any";
+ testManager.setDumpAllReports(enable);
+ }
+ else
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ opt_response_content += (enable ? "report enabled " : "report disabled ");
+ opt_response_content += "for tests in '";
+ opt_response_content += param2;
+ opt_response_content += "' state";
+ }
+ else if(param1 == "report-hex") {
+ if (numParams > 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ if(param2 == "") param2 = "yes";
+ testManager.setDumpHex((param2 == "yes"));
+ opt_response_content += (testManager.getDumpHex() ? "report includes hexadecimal messages" : "report excludes hexadecimal messages");
+ }
+ else if(param1 == "dump-stdout") {
+ if (numParams > 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ if(param2 == "") param2 = "yes";
+ testManager.setDumpStdout((param2 == "yes"));
+ opt_response_content += (testManager.getDumpHex() ? "test manager dumps progress into stdout" : "test manager does not dump progress into stdout");
+ }
+ else if(param1 == "goto") {
+ if (numParams > 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ if(param2 == "") throw anna::RuntimeException("Missing id for test goto operation", ANNA_FILE_LOCATION);
+ int id = atoi(param2.c_str());
+ if (testManager.gotoTestCase(id)) {
+ opt_response_content = "position updated for id provided (";
+ }
+ else {
+ opt_response_content = "cannot found test id (";
+ }
+ opt_response_content += anna::functions::asString(id);
+ opt_response_content += ")";
+ }
+ else if(param1 == "run") {
+ if (numParams > 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ if(param2 == "") throw anna::RuntimeException("Missing id for test run operation", ANNA_FILE_LOCATION);
+ int id = atoi(param2.c_str());
+ if (testManager.runTestCase(id)) {
+ opt_response_content = "test executed for id provided (";
+ }
+ else {
+ opt_response_content = "cannot found test id (";
+ }
+ opt_response_content += anna::functions::asString(id);
+ opt_response_content += ")";
+ }
+ else if(param1 == "look") {
+ if (numParams > 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ int id = ((param2 != "") ? atoi(param2.c_str()) : -1);
+ anna::testing::TestCase *testCase = testManager.findTestCase(id);
+
+ if (testCase) {
+ response_content = testCase->asXMLString();
+ return true; // OK
+ }
+ else {
+ result = false;
+ if (id == -1) {
+ opt_response_content = "no current test case detected (testing started ?)";
+ }
+ else {
+ opt_response_content = "cannot found test id (";
+ opt_response_content += anna::functions::asString(id);
+ opt_response_content += ")";
+ }
+ }
+ }
+ else if(param1 == "state") {
+ if (numParams > 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ int id = ((param2 != "") ? atoi(param2.c_str()) : -1);
+ anna::testing::TestCase *testCase = testManager.findTestCase(id);
+
+ if (testCase) {
+ response_content = anna::testing::TestCase::asText(testCase->getState());
+ return testCase->isSuccess();
+ }
+ else {
+ result = false;
+ if (id == -1) {
+ opt_response_content = "no current test case detected (testing started ?)";
+ }
+ else {
+ opt_response_content = "cannot found test id (";
+ opt_response_content += anna::functions::asString(id);
+ opt_response_content += ")";
+ }
+ }
+ }
+ else if (param1 == "interact") {
+ if (numParams != 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ int amount = atoi(param2.c_str());
+ if (amount < -1)
+ throw anna::RuntimeException("Interactive amount must be -1 (to disable interactive mode) or a positive number.", ANNA_FILE_LOCATION);
+
+ int id = ((param3 != "") ? atoi(param3.c_str()) : -1);
+ anna::testing::TestCase *testCase = testManager.findTestCase(id);
+ if (testCase) {
+ if (amount == -1) {
+ testCase->makeInteractive(false);
+ opt_response_content = "interactive mode disabled";
+ }
+ else {
+ testCase->addInteractiveAmount(amount);
+ opt_response_content = "added interactive amount of ";
+ opt_response_content += anna::functions::asString(amount);
+ opt_response_content += " units";
+ if (amount == 0) opt_response_content += " (0: freezing a non-interactive testcase, no effect on already interactive)";
+ }
+ opt_response_content += " for test case id ";
+ opt_response_content += anna::functions::asString(id);
+ }
+ else {
+ result = false;
+ opt_response_content = "cannot found test id (";
+ opt_response_content += anna::functions::asString(id);
+ opt_response_content += ")";
+ }
+ }
+ else if(param1 == "reset") {
+ if (numParams > 3)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ if(param2 == "") param2 = "soft";
+ if (param2 != "soft" && param2 != "hard")
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ int id = ((param3 != "") ? atoi(param3.c_str()) : -1);
+ anna::testing::TestCase *testCase = ((id != -1) ? testManager.findTestCase(id) : NULL);
+
+ if (testCase) {
+ bool done = testCase->reset(param2 == "hard");
+ opt_response_content = "test ";
+ opt_response_content += param2;
+ opt_response_content += " reset for id ";
+ opt_response_content += anna::functions::asString(id);
+ opt_response_content += done ? ": done": ": not done";
+ }
+ else {
+ if (id == -1) {
+ bool anyReset = testManager.resetPool(param2 == "hard");
+ opt_response_content = param2; opt_response_content += " reset have been sent to all programmed tests: "; opt_response_content += anyReset ? "some/all have been reset" : "nothing was reset";
+ }
+ else {
+ result = false;
+ opt_response_content = "cannot found test id (";
+ opt_response_content += anna::functions::asString(id);
+ opt_response_content += ")";
+ }
+ }
+ }
+ else if(param1 == "auto-reset") {
+ if (numParams != 2)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ if (param2 != "soft" && param2 != "hard")
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ testManager.setAutoResetHard(param2 == "hard");
+ opt_response_content += anna::functions::asString("Auto-reset configured to '%s'", param2.c_str());
+ }
+ else if(param1 == "initialized") {
+ if (numParams > 1)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ opt_response_content = anna::functions::asString("%lu", testManager.getInitializedCount());
+ }
+ else if(param1 == "finished") {
+ if (numParams > 1)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ opt_response_content = anna::functions::asString("%lu", testManager.getFinishedCount());
}
+ else if(param1 == "clear") {
+ if (numParams > 1)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+
+ if (testManager.clearPool()) {
+ opt_response_content = "all the programmed test cases have been dropped";
+ }
+ else {
+ opt_response_content = "there are not programmed test cases to be removed";
+ }
+ }
+ else if(param1 == "junit") {
+ response_content = testManager.junitAsXMLString();
+ return true; // OK
+ }
+ else if(param1 == "summary-counts") {
+ response_content = testManager.summaryCounts();
+ return true; // OK
+ }
+ else if(param1 == "summary-states") {
+ response_content = testManager.summaryStates();
+ return true; // OK
+ }
+ else if(param1 == "summary") {
+ response_content = testManager.asXMLString();
+ return true; // OK
+ }
+ else {
+ int id = atoi(param1.c_str());
+ if(id < 0)
+ throw anna::RuntimeException("Invalid test case identifier: must be a non-negative number", ANNA_FILE_LOCATION);
+
+ // PARAM: 1 2 3 4 5 6 7 8 9 10 11
+ // test|<id>|<command>
+ // description|<description>
+ // ip-limit[|<iplimit>]
+ // timeout| <msecs>
+ // sendxml2e| <file>[|<step number>]
+ // sendxml2c| <file>[|<step number>]
+ // delay| [msecs]
+ // wait<fe/fc>|[code]|[bitR]|[hopByHop]|[applicationId]|[sessionId]|[resultCode]|[msisdn]|[imsi]|[serviceContextId]
+ // wait<fe/fc>-answer|<step number>
+ // wait<fe/fc>-xml |<source_file>[|strict]
+ // wait<fe/fc>-hex |<source_file>[|strict]
+ if(param2 == "") throw anna::RuntimeException("Missing command for test id operation", ANNA_FILE_LOCATION);
+
+ // Commands:
+ if (param2 == "description") {
+ if (numParams > 3)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ if(param3 == "") throw anna::RuntimeException("Missing description for test case", ANNA_FILE_LOCATION);
+ testManager.getTestCase(id)->setDescription(param3); // creates / reuses
+ }
+ else if (param2 == "ip-limit") {
+ if (numParams > 3)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ unsigned int limit = (param3 == "") ? 1 : atoi(param3.c_str());
+ testManager.getTestCase(id)->addIpLimit(limit); // creates / reuses
+ }
+ else if (param2 == "timeout") {
+ if (numParams > 3)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ if(param3 == "") throw anna::RuntimeException("Missing milliseconds for 'timeout' command in test id operation", ANNA_FILE_LOCATION);
+ anna::Millisecond timeout = checkTimeMeasure("Test case timeout", param3);
+ testManager.getTestCase(id)->addTimeout(timeout); // creates / reuses
+ }
+ else if ((param2 == "sendxml2e")||(param2 == "sendxml2c")) {
+ if (numParams > 4)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ if(param3 == "") throw anna::RuntimeException(anna::functions::asString("Missing xml file for '%s' command in test id operation", param2.c_str()), ANNA_FILE_LOCATION);
+ codecMsg.loadXMLFile(param3);
+ LOGWARNING(
+ if (!codecMsg.isRequest() && (param4 == ""))
+ anna::Logger::warning("Step number has not been provided. Take into account that this answer message will be sent 'as is' and sequence information could be wrong at the remote peer", ANNA_FILE_LOCATION);
+ );
+
+ updateOperatedOriginHostWithMessage(codecMsg);
+ int stepNumber = ((param4 != "") ? atoi(param4.c_str()):-1);
+
+ if (param2 == "sendxml2e")
+ testManager.getTestCase(id)->addSendDiameterXml2e(codecMsg.code(), getOperatedHost(), stepNumber); // creates / reuses
+ else
+ testManager.getTestCase(id)->addSendDiameterXml2c(codecMsg.code(), getOperatedHost(), stepNumber); // creates / reuses
+ }
+ else if (param2 == "delay") {
+ if (numParams > 3)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ if(param3 == "") throw anna::RuntimeException("Missing milliseconds for 'delay' command in test id operation", ANNA_FILE_LOCATION);
+ anna::Millisecond delay = ((param3 == "0" /* special case */) ? (anna::Millisecond)0 : checkTimeMeasure("Test case delay step", param3));
+ testManager.getTestCase(id)->addDelay(delay); // creates / reuses
+ }
+
+// TODO(***)
+// The way to identify the test case, is through registered Session-Id values for
+// programmed requests. But this depends on the type of node. Acting as clients,
+// requests received have Session-Id values which are already registered with
+// one test case, causing an error if not found. Acting as servers, requests are
+// received over a diameter local server from a client which are generating that
+// Session-Id values. Then we know nothing about such values. The procedure in
+// this case is find out a test case not-started containing a condition which
+// comply with the incoming message, and reactivates it.
+// The other solution: register Session-Id values for answers send to client from a local diameter server.
+ else if ((param2 == "waitfe")||(param2 == "waitfc")) {
+ if (numParams > 11)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ if (param3 != "" || param4 != "" || param5 != "" || param6 != "" || param7 != "" || param8 != "" || param9 != "" || param10 != "" || param11 != "") {
+ bool fromEntity = (param2.substr(4,2) == "fe");
+ testManager.getTestCase(id)->addWaitDiameter(fromEntity, param3, param4, param5, param6, param7, param8, param9, param10, param11);
+ }
+ else {
+ throw anna::RuntimeException(anna::functions::asString("Missing condition for '%s' command in test id operation", param2.c_str()), ANNA_FILE_LOCATION);
+ }
+ }
+ else if ((param2 == "waitfe-hex")||(param2 == "waitfc-hex")) {
+ if (numParams > 4)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ if(param3 == "") throw anna::RuntimeException(anna::functions::asString("Missing hex file for '%s' command in test id operation", param2.c_str()), ANNA_FILE_LOCATION);
+
+ // Get DataBlock from file with hex content:
+ if(!getDataBlockFromHexFile(param3, db_aux))
+ throw anna::RuntimeException("Error reading hex content from file provided", ANNA_FILE_LOCATION);
+
+ // Hexadecimal representation read from file:
+ std::string regexp = anna::functions::asHexString(db_aux);
+
+ // optional 'full':
+ if(param4 != "strict") {
+ //// If request, we will ignore sequence data:
+ //if (anna::diameter::codec::functions::requestBit(db_aux))
+ regexp.replace (24, 16, "[0-9A-Fa-f]{16}");
+
+ regexp.insert(0, "^");
+ regexp += "$";
+ }
+
+ bool fromEntity = (param2.substr(4,2) == "fe");
+ testManager.getTestCase(id)->addWaitDiameterRegexpHex(fromEntity, regexp);
+ }
+ else if ((param2 == "waitfe-xml")||(param2 == "waitfc-xml")) {
+ if (numParams > 4)
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ if(param3 == "") throw anna::RuntimeException(anna::functions::asString("Missing xml file for '%s' command in test id operation", param2.c_str()), ANNA_FILE_LOCATION);
+
+ codecMsg.loadXMLFile(param3);
+ std::string regexp = codecMsg.asXMLString(true /* normalization */);
+
+ // Now we must insert regular expressions in hop-by-hop, end-to-end and Origin-State-Id:
+
+ // optional 'full':
+ if(param4 != "strict") {
+ std::string::size_type pos, pos_1, pos_2;
+
+ pos = regexp.find("end-to-end-id=", 0u);
+ pos = regexp.find("\"", pos);
+ pos_1 = pos;
+ pos = regexp.find("\"", pos+1);
+ pos_2 = pos;
+ regexp.replace(pos_1 + 1, pos_2 - pos_1 - 1, "[0-9]+");
+
+ pos = regexp.find("hop-by-hop-id=", 0u);
+ pos = regexp.find("\"", pos);
+ pos_1 = pos;
+ pos = regexp.find("\"", pos+1);
+ pos_2 = pos;
+ regexp.replace(pos_1 + 1, pos_2 - pos_1 - 1, "[0-9]+");
+
+ // For this representation: <avp name="Origin-State-Id" data="1428633668"/>
+ //pos = regexp.find("Origin-State-Id", 0u);
+ //pos = regexp.find("\"", pos);
+ //pos = regexp.find("\"", pos+1);
+ //pos_1 = pos;
+ //pos = regexp.find("\"", pos+1);
+ //pos_2 = pos;
+ //regexp.replace(pos_1 + 1, pos_2 - pos_1 - 1, "[0-9]+");
+ // But we have this one: <avp data="1428633668" name="Origin-State-Id"/>
+ pos = regexp.find("Origin-State-Id", 0u);
+ pos = regexp.rfind("\"", pos);
+ pos = regexp.rfind("\"", pos-1);
+ pos = regexp.rfind("\"", pos-1);
+ pos_1 = pos;
+ pos = regexp.find("\"", pos+1);
+ pos_2 = pos;
+ regexp.replace(pos_1 + 1, pos_2 - pos_1 - 1, "[0-9]+");
+
+ //regexp.insert(0, "^");
+ //regexp += "$";
+ }
+
+ bool fromEntity = (param2.substr(4,2) == "fe");
+ testManager.getTestCase(id)->addWaitDiameterRegexpXml(fromEntity, regexp);
+ }
+ else if (param2 == "sh-command") {
+ // Allow pipes in command:
+ //if (numParams > 4)
+ // throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ if(param3 == "") throw anna::RuntimeException("Missing script/executable command-line for 'sh-command' in test id operation", ANNA_FILE_LOCATION);
+ std::string token = "|sh-command|";
+ std::string command = operation.substr(operation.find(token) + token.size());
+ testManager.getTestCase(id)->addCommand(command); // creates / reuses
+ }
+ else {
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
+ }
+ }
+
} else if((opType == "sendxml2c") || (opType == "sendhex2c")) {
- if(!localServer) throw anna::RuntimeException("No local server configured to send the message", ANNA_FILE_LOCATION);
- anna::diameter::comm::Message *msg = getWorkingNode()->createCommMessage();
+ anna::diameter::comm::Message *msg;
if(opType == "sendxml2c") {
- codecMsg.loadXML(param1);
+ codecMsg.loadXMLFile(param1);
+ updateOperatedOriginHostWithMessage(codecMsg);
+ msg = getOperatedHost()->createCommMessage();
msg->clearBody();
try { codecMsg.valid(); } catch(anna::RuntimeException &ex) { ex.trace(); } // at least we need to see validation errors although it will continue sending (see validation mode configured in launcher)
// Get DataBlock from file with hex content:
if(!getDataBlockFromHexFile(param1, db_aux))
throw anna::RuntimeException("Error reading hex file provided", ANNA_FILE_LOCATION);
-
+ msg = getOperatedHost()->createCommMessage();
msg->setBody(db_aux);
}
- bool success = localServer->send(msg);
- getWorkingNode()->releaseCommMessage(msg);
+ bool success = getOperatedServer()->send(msg);
+ getOperatedHost()->releaseCommMessage(msg);
// Detailed log:
- if(getWorkingNode()->logEnabled()) {
- anna::diameter::comm::ServerSession *usedServerSession = localServer->getLastUsedResource();
- std::string detail = usedServerSession ? usedServerSession->asString() : "<null server session>"; // esto no deberia ocurrir
- getWorkingNode()->writeLogFile(codecMsg, (success ? "sent2c" : "send2cError"), detail);
+ if(getOperatedHost()->logEnabled()) {
+ anna::diameter::comm::ServerSession *usedServerSession = getOperatedServer()->getLastUsedResource();
+ std::string detail = usedServerSession ? usedServerSession->asString() : "<null server session>"; // shouldn't happen
+ getOperatedHost()->writeLogFile(codecMsg, (success ? "sent2c" : "send2cError"), detail);
}
} else if(opType == "loadxml") {
- codecMsg.loadXML(param1);
- std::string xmlString = codecMsg.asXMLString();
- std::cout << xmlString << std::endl;
+ codecMsg.loadXMLFile(param1);
+ response_content = codecMsg.asXMLString();
+ return true; // OK
} else if(opType == "diameterServerSessions") {
int diameterServerSessions = atoi(param1.c_str());
+ getOperatedServer()->setMaxConnections(diameterServerSessions);
- if(localServer)
- localServer->setMaxConnections(diameterServerSessions);
- else
- LOGWARNING(anna::Logger::warning("To update the number of sessions, you must configure the process diameter local server: you could also launch it with no sessions (disabled)", ANNA_FILE_LOCATION));
-
- } else if((opType == "answerxml") || (opType == "answerxml2c")) {
- if(!localServer)
- throw anna::RuntimeException("Operation not applicable (no own diameter server has been configured)", ANNA_FILE_LOCATION);
-
+ } else if(opType == "answerxml2c") {
if(param1 == "") { // programmed answers FIFO's to stdout
- std::cout << localServer->getReactingAnswers()->asString("ANSWERS TO CLIENT") << std::endl;
- response_content = "Programmed answers dumped on stdout\n";
- return;
+ response_content = getOperatedServer()->getReactingAnswers()->asString("ANSWERS TO CLIENT");
+ return true; // OK
} else if (param1 == "rotate") {
- localServer->getReactingAnswers()->rotate(true);
+ getOperatedServer()->getReactingAnswers()->rotate(true);
} else if (param1 == "exhaust") {
- localServer->getReactingAnswers()->rotate(false);
+ getOperatedServer()->getReactingAnswers()->rotate(false);
} else if (param1 == "clear") {
- localServer->getReactingAnswers()->clear();
+ getOperatedServer()->getReactingAnswers()->clear();
} else if (param1 == "dump") {
- localServer->getReactingAnswers()->dump();
+ getOperatedServer()->getReactingAnswers()->dump("programmed_answer");
} else {
- anna::diameter::codec::Message *message = getCodecEngine()->createMessage(param1); // // XXXXXXXXXXXXXX el del nodo de trabajo
- LOGDEBUG
- (
- anna::Logger::debug(message->asXMLString(), ANNA_FILE_LOCATION);
- );
+ codecMsg.loadXMLFile(param1);
+ updateOperatedOriginHostWithMessage(codecMsg);
+ anna::diameter::codec::Message *message = getOperatedHost()->getCodecEngine()->createMessage(param1); // loads xml again, lesser of two evils
+ LOGDEBUG(anna::Logger::debug(message->asXMLString(), ANNA_FILE_LOCATION));
if(message->isRequest())
throw anna::RuntimeException("Cannot program diameter requests. Answer type must be provided", ANNA_FILE_LOCATION);
int code = message->getId().first;
LOGDEBUG(anna::Logger::debug("Adding a new programed 'answer to client' to the FIFO queue corresponding to its message code ...", ANNA_FILE_LOCATION));
- localServer->getReactingAnswers()->addMessage(code, message);
+ getOperatedServer()->getReactingAnswers()->addMessage(code, message);
}
} else if(opType == "answerxml2e") {
- if(!entity)
- throw anna::RuntimeException("Operation not applicable (no diameter entity has been configured)", ANNA_FILE_LOCATION);
if(param1 == "") { // programmed answers FIFO's to stdout
- std::cout << entity->getReactingAnswers()->asString("ANSWERS TO ENTITY") << std::endl;
- response_content = "Programmed answers dumped on stdout\n";
- return;
+ response_content = getOperatedEntity()->getReactingAnswers()->asString("ANSWERS TO ENTITY");
+ return true; // OK
} else if (param1 == "rotate") {
- entity->getReactingAnswers()->rotate(true);
+ getOperatedEntity()->getReactingAnswers()->rotate(true);
} else if (param1 == "exhaust") {
- entity->getReactingAnswers()->rotate(false);
+ getOperatedEntity()->getReactingAnswers()->rotate(false);
} else if (param1 == "clear") {
- entity->getReactingAnswers()->clear();
+ getOperatedEntity()->getReactingAnswers()->clear();
} else if (param1 == "dump") {
- entity->getReactingAnswers()->dump();
+ getOperatedEntity()->getReactingAnswers()->dump("programmed_answer");
} else {
- anna::diameter::codec::Message *message = getCodecEngine()->createMessage(param1); // XXXXXXXXXXXXXX el del nodo de trabajo
- LOGDEBUG
- (
- anna::Logger::debug(message->asXMLString(), ANNA_FILE_LOCATION);
- );
+ codecMsg.loadXMLFile(param1);
+ updateOperatedOriginHostWithMessage(codecMsg);
+ anna::diameter::codec::Message *message = getOperatedHost()->getCodecEngine()->createMessage(param1); // loads xml again, lesser of two evils
+ LOGDEBUG(anna::Logger::debug(message->asXMLString(), ANNA_FILE_LOCATION));
if(message->isRequest())
throw anna::RuntimeException("Cannot program diameter requests. Answer type must be provided", ANNA_FILE_LOCATION);
int code = message->getId().first;
LOGDEBUG(anna::Logger::debug("Adding a new programed 'answer to entity' to the FIFO queue corresponding to its message code ...", ANNA_FILE_LOCATION));
- entity->getReactingAnswers()->addMessage(code, message);
+ getOperatedEntity()->getReactingAnswers()->addMessage(code, message);
}
} else {
- LOGWARNING(anna::Logger::warning(help(), ANNA_FILE_LOCATION));
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Unsupported/unrecognized operation type", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
}
// HTTP response
- response_content = "Operation processed; ";
-
- if((opType == "decode") || (opType == "code")) {
- response_content += "File '";
- response_content += param2;
- response_content += "' created.";
- response_content += "\n";
- } else if((opType == "hide") || (opType == "show")) {
- response_content += "Resource '";
- response_content += ((param1 != "") ? param1 : "Entity");
-
- if(param2 != "") {
- response_content += "|";
- response_content += param2;
- }
-
- response_content += "' ";
-
- if(opType == "hide") response_content += "has been hidden.";
-
- if(opType == "show") response_content += "has been shown.";
-
- response_content += "\n";
- } else if((opType == "hidden") || (opType == "shown")) {
- response_content += "Result: ";
- response_content += result;
- response_content += "\n";
- } else if((opType == "sendxml") || (opType == "sendxml2e") || (opType == "sendhex") || (opType == "sendhex2e")) {
- response_content += "Message '";
- response_content += param1;
- response_content += "' sent to entity.";
- response_content += "\n";
- } else if(opType == "burst") {
- response_content += "Burst '";
- response_content += param1;
- response_content += "' executed. ";
- response_content += result;
- response_content += "\n";
- } else if((opType == "sendxml2c") || (opType == "sendhex2c")) {
- response_content += "Message '";
- response_content += param1;
- response_content += "' sent to client.";
- response_content += "\n";
- } else if(opType == "loadxml") {
- response_content += "Message '";
- response_content += param1;
- response_content += "' loaded.";
- response_content += "\n";
- } else if((opType == "answerxml") || (opType == "answerxml2c")) {
- response_content += "'";
- response_content += param1;
- response_content += "' applied on server FIFO queue";
- response_content += "\n";
- } else if(opType == "answerxml2e") {
- response_content += "'";
- response_content += param1;
- response_content += "' applied on client FIFO queue";
- response_content += "\n";
- } else if(opType == "diameterServerSessions") {
- response_content += "Maximum server socket connections updated to '";
- response_content += param1;
- response_content += "'.";
- response_content += "\n";
+ response_content = "Operation correctly processed: "; response_content += operation;
+ if (opt_response_content != "") {
+ response_content += " => ";
+ response_content += opt_response_content;
}
+
+ return result;
}
anna::xml::Node* Launcher::asXML(anna::xml::Node* parent) const
anna::comm::Application::asXML(result);
// Timming:
result->createAttribute("StartTime", a_start_time.asString());
+ result->createAttribute("InitialWorkingDirectory", a_initialWorkingDirectory);
result->createAttribute("SecondsLifeTime", anna::time::functions::lapsedMilliseconds() / 1000);
// Diameter:
- getCodecEngine()->asXML(result);
- for (realm_nodes_it it = a_nodes.begin(); it != a_nodes.end(); it++) {
+ anna::diameter::comm::OriginHostManager &ohm = anna::diameter::comm::OriginHostManager::instantiate();
+ for (diameter::comm::origin_hosts_it it = ohm.begin(); it != ohm.end(); it++) {
it->second->asXML(result);
}
+ // Registered codec engines:
+ anna::diameter::codec::EngineManager &em = anna::diameter::codec::EngineManager::instantiate();
+ em.asXML(result);
+
+ // OAM & statistics:
+ oamAsXML(result);
+ statsAsXML(result);
+
+ // Testing: could be heavy if test case reports are enabled
+ anna::testing::TestManager::instantiate().asXML(result);
+
+ return result;
+}
+
+anna::xml::Node* Launcher::oamAsXML(anna::xml::Node* parent) const
+throw() {
+ anna::xml::Node* result = parent->createChild("Oam");
+
// OAM:
anna::diameter::comm::OamModule::instantiate().asXML(result);
anna::diameter::comm::ApplicationMessageOamModule::instantiate().asXML(result);
anna::diameter::codec::OamModule::instantiate().asXML(result);
+
+ return result;
+}
+
+anna::xml::Node* Launcher::statsAsXML(anna::xml::Node* parent) const
+throw() {
+ anna::xml::Node* result = parent->createChild("Statistics");
+
// Statistics:
anna::statistics::Engine::instantiate().asXML(result);
+
return result;
}
projects / anna.git / blobdiff