log: Process log file (operations result, traffic log, etc.). By default '<originHost>.launcher.log'.\n\
Empty string or \"null\" name, to disable. Warning: there is no rotation for log files\n\
(use logrotate or whatever you consider).\n\
- splitLog: Splits log file (appends to log filename, extensions with the type of event: see help on\n\
- startup information-level traces). No log files for code/decode and load operations are created.\n\
+ splitLog: Splits log file (appends to log filename, extensions with the type of event.\n\
+ (Check 'HELP.md' for more information). No log files for code/decode and load operations are created.\n\
Default value 'no'.\n\
detailedLog: Insert detailed information at log files (timestamps, communication resources, etc.). Useful\n\
to analyze the messages flow along the sockets (specially on 'balance' mode). Default 'no'.\n\
anna::statistics::Engine::instantiate().enable();
LOGINFORMATION(
- // Help on startup traces:
- anna::Logger::information(help(), ANNA_FILE_LOCATION);
// Test messages dtd:
std::string msg = "\n ------------- TESTMESSAGES DTD -------------\n";
msg += anna::diameter::codec::MessageDTD;
out_file.close();
}
-std::string Launcher::help() const throw() {
- std::string result = "\n";
- result += "\n ------------- HELP -------------\n";
- result += "\n";
- result += "\nOVERVIEW";
- result += "\n--------";
- result += "\n";
- result += "\nThe ADML (ANNA Diameter MultiHost Launcher) process is a multi-host node with client and server";
- result += "\n capabilities as well as balancer (proxy) features. It could be used as diameter server (i.e. to";
- result += "\n simulate PCRF nodes, OCS systems, etc.), as diameter client (GGSNs, DPIs, etc.), and balancer";
- result += "\n systems to provide failover to external round-robin launchers. Also, auxiliary encoder/decoder/loader";
- result += "\n function could be deployed to reinterpret certain external flow and send it to another process.";
- result += "\n ";
- result += "\nThe ANNA::diameter_comm built-in module provides a great set of characteristics as multiple connections";
- result += "\n on both server and client side, definition for multiple-server entities (and not only two as standard";
- result += "\n establish as minimum), separate statistics analyzer per each resource, automatic CER/CEA and DWR/DWA";
- result += "\n generation, expiration control and many more features.";
- result += "\n";
- result += "\nThe ADML process can easily configure a many origin-host nodes as needed, which will have own endpoints.";
- result += "\nYou should avoid loop configurations (client and server for that client) because automatic forwarding,";
- result += "\n is implemented and this would get in a never ending cycle when a request is sent.";
- result += "\n";
- result += "\nProcess traces are dump on \"launcher.trace\" and could have any trace level (POSIX levels), usually";
- result += "\n 'debug' or 'warning'. See ANNA documentation for more details.";
- result += "\n";
- result += "\nAs any other ANNA process, context dump could be retrieved sending SIGUSR1 signal:";
- result += "\n kill -10 <pid>";
- result += "\n or";
- result += "\n kill -s SIGUSR1 <pid>";
- result += "\n and then";
- result += "\n vi /var/tmp/anna.context.<pid>";
- result += "\n";
- result += "\nA complete xml report will show all the context information (counters, alarms, statistics,";
- result += "\n handlers, diameter stacks, etc.), and a powerful log module could dump all the events";
- result += "\n processed and flow information. Statistics could be analized at context dump and optionally";
- result += "\n written to disk as sample files (useful for graphs and spreadsheet reports) with all the";
- result += "\n measurements.";
- result += "\n";
- result += "\nAlso SIGUSR2 is handled for management purposes. We will talk later about this.";
- result += "\n";
- result += "\n";
- result += "\nCOMMAND LINE";
- result += "\n------------";
- result += "\n";
- result += "\nStart the launcher process without arguments in order to see all the startup configuration";
- result += "\n posibilities, many of which could be modified on the air through the management interface";
- result += "\n (we will talk later about this great feature). There is only one mandatory parameter which";
- result += "\n is the services definition: --services <services xml file>. You must follow the dtd schema";
- result += "\n to build a valid services xml file. Some basic examples are:";
- result += "\n";
- result += "\nClient configuration:";
- result += "\n";
- result += "\n<services>";
- result += "\n <!-- Stacks -->";
- result += "\n <stack id=\"0\" dictionary=\"dictionary.xml\"/>";
- result += "\n";
- result += "\n <!-- Nodes -->";
- result += "\n <node originHost=\"ADML-client\" applicationId=\"0\" entity=\"localhost:3868\"/>";
- result += "\n</services>";
- result += "\n";
- result += "\nServer configuration:";
- result += "\n";
- result += "\n<services>";
- result += "\n <!-- Stacks -->";
- result += "\n <stack id=\"0\" dictionary=\"dictionary.xml\"/>";
- result += "\n";
- result += "\n <!-- Nodes -->";
- result += "\n <node originHost=\"ADML-server\" applicationId=\"0\" diameterServer=\"localhost:3868\"/>";
- result += "\n</services>";
- result += "\n";
- result += "\nIf you act as a proxy or a translation agent, you need to combine both former setups, and probably";
- result += "\n will need to program the answers to be replied through the operations interface. To balance the";
- result += "\n traffic at your client side you shall use '--balance' and '--sessionBasedModelsClientSocketSelection'";
- result += "\n arguments in order to define the balancing behaviour. To make hybrid setups you only must mix the nodes:";
- result += "\n";
- result += "\nClient and server configuration:";
- result += "\n";
- result += "\n<services>";
- result += "\n <!-- Stacks -->";
- result += "\n <stack id=\"16777236\" dictionary=\"dictionary_Rx.xml\"/>";
- result += "\n <stack id=\"16777238\" dictionary=\"dictionary_Gx.xml\"/>";
- result += "\n <stack id=\"0\" dictionary=\"dictionary_base.xml\"/>";
- result += "\n";
- result += "\n <!-- Nodes -->";
- result += "\n <node originHost=\"ADML-Rx-client\" applicationId=\"16777236\" entity=\"localhost:3868\" cer=\"cer_Rx.xml\"/>";
- result += "\n <node originHost=\"ADML-Gx-client\" applicationId=\"16777238\" entity=\"localhost:3868\" cer=\"cer_Gx.xml\"/>";
- result += "\n</services>";
- result += "\n";
- result += "\n";
- result += "\nThe process builds automatically CER and DWR messages as a client, but you could specify your own";
- result += "\n as shown in the hybrid former example. Note that the base protocol stack must be registered because";
- result += "\n the configuration corresponds to a multistack process which change the stack using the application-id";
- result += "\n processed (0 in the case of base protocol messages: CER, CEA, DWR, DWA, DPR, DPA).";
- result += "\n";
- result += "\nDYNAMIC OPERATIONS";
- result += "\n------------------";
- result += "\n";
- result += "\nADML supports several operations which could be reconized via HTTP interface or SIGUSR2 caugh.";
- result += "\nAn operation is specified by mean a string containing the operation name and needed arguments";
- result += "\n separated by pipes. These are the available commands:";
- result += "\n";
- result += "\n--------------------------------------------------------------------------------------- General purpose";
- result += "\n";
- result += "\nhelp This help.";
- result += "\n";
- result += "\n--------------------------------------------------------------------------------------- Node management";
- result += "\n";
- result += "\nnode[|<name>] Selects a context working node by mean a registered name (origin-host).";
- result += "\n All the subsequent operations will be forced to work with";
- result += "\n this node, which makes possible some rare scenarios like";
- result += "\n sending unexpected messages on remote peers. This is also";
- result += "\n useful for some operations in order to restrict the scope";
- result += "\n of action (statistics, communication visibility, etc.).";
- result += "\n Empty parameter will show the current configuration.";
- result += "\n";
- result += "\nnode_auto Returns to the default behaviour (smart node selection).";
- result += "\n Depending on the operation, this could imply a global";
- result += "\n action scope, affecting to all the registered hosts.";
- result += "\n This should be the normal configuration. Take into";
- result += "\n account that if you fix the working node, this could";
- result += "\n affect to things like test programming: communication";
- result += "\n resources will override those which would be inferred";
- result += "\n from programmed messages Origin-Host avps.";
- result += "\n";
- result += "\n------------------------------------------------------------------------------------ Parsing operations";
- result += "\n";
- result += "\ncode|<source_file>|<target_file> Encodes source file (pathfile) into target file (pathfile).";
- result += "\ndecode|<source_file>|<target_file> Decodes source file (pathfile) into target file (pathfile).";
- result += "\nloadxml|<source_file> Reinterpret xml source file (pathfile).";
- result += "\n";
- result += "\n------------------------------------------------------------------------------------------- Hot changes";
- result += "\n";
- result += "\nservices[|source file] Adds and starts the services specified in the xml file provided.";
- result += "\n (if missing, the file 'services.xml' will be used). This is used";
- result += "\n to load new nodes once the ADML is started, regardless if command";
- result += "\n line '--services' parameter was used or not. Those services which";
- result += "\n are not correctly loaded will be ignored to keep the process alive.";
- result += "\n If you need to load services as deltas, you must firstly load the";
- result += "\n diameter base dictionary with stack id 0, because all the nodes";
- result += "\n will use this dictionary to encode/decode base protocol messages";
- result += "\n managed by the communication engine.";
- result += "\n";
- result += "\ndiameterServerSessions|<integer> Updates the maximum number of accepted connections to diameter";
- result += "\n server socket.";
- result += "\ncontext[|target file] Application context could also be written by mean this operation,";
- result += "\n and not only through SIGUSR1. If optional path file is missing,";
- result += "\n default '/var/tmp/anna.context.<pid>' will be used.";
- result += "\ncollect Reset statistics and counters to start a new test stage of";
- result += "\n performance measurement. Context data can be written at";
- result += "\n '/var/tmp/anna.context.<pid>' by mean 'kill -10 <pid>'.";
- result += "\n or sending operation 'context|[target file]'.";
- result += "\n This operation applies over all the registered host nodes";
- result += "\n except if one specific working node has been set.";
- result += "\nforceCountersRecord Forces dump to file the current counters of the process.";
- result += "\nlog-statistics-samples|<list> Log statistics samples for the provided comma-separated concept id";
- result += "\n list, over './sample.<concept id>.csv' files. For example: \"1,2\"";
- result += "\n will log concepts 1 and 2. Reserved words \"all\"/\"none\" activates/";
- result += "\n deactivates all registered statistics concept identifiers. That ids";
- result += "\n are shown at context dump.";
- result += "\nchange-dir[|directory] Changes the execution point which could be fine to ease some";
- result += "\n file system interaction tasks. Be care about some requirements";
- result += "\n (for example if you have a user defined counters directory as";
- result += "\n relative path this must exists from the new execution directory).";
- result += "\n If nothing provided, initial working directory will be restored.";
- result += "\nshow-oam Dumps current counters of the process. This is also done at";
- result += "\n process context dump.";
- result += "\nshow-stats Dumps statistics of the process. This is also done at process";
- result += "\n context dump.";
- result += "\n";
- result += "\n<visibility action>[|<address>:<port>][|socket id]";
- result += "\n";
- result += "\n Actions: hide, show (update state) and hidden, shown (query state).";
- result += "\n Acts over a client session for messages delivery (except CER/A, DWR/A, DPR/A).";
- result += "\n If missing server (first parameter) all applications sockets will be affected.";
- result += "\n If missing socket (second parameter) for specific server, all its sockets will be affected.";
- result += "\n";
- result += "\n All application client sessions are shown on startup, but standard delivery only use primary";
- result += "\n server ones except if fails. Balance configuration use all the allowed sockets. You could also";
- result += "\n use command line 'sessionBasedModelsClientSocketSelection' to force traffic flow over certain";
- result += "\n client sessions, but for this, hide/show feature seems easier.";
- result += "\n";
- result += "\n--------------------------------------------------------------------------------------- Flow operations";
- result += "\n";
- result += "\nsendxml2e|<source_file> Sends xml source file (pathfile) through configured entity.";
- result += "\nsendxml2c|<source_file> Sends xml source file (pathfile) to client.";
- result += "\nanswerxml2e[|source_file] Answer xml source file (pathfile) for incoming request with same code from entity.";
- result += "\n The answer is stored in a FIFO queue for a specific message code, then there are";
- result += "\n as many queues as different message codes have been programmed.";
- result += "\nanswerxml2c[|source_file] Answer xml source file (pathfile) for incoming request with same code from client.";
- result += "\n The answer is stored in a FIFO queue for a specific message code, then there are";
- result += "\n as many queues as different message codes have been programmed.";
- result += "\nanswerxml<2e/2c> List programmed answers (to entity/client) if no parameter provided.";
- result += "\nanswerxml<2e/2c>|dump Write programmed answers (to entity/client) to file 'programmed_answer.<message code>.<sequence>',";
- result += "\n where 'sequence' is the order of the answer in each FIFO code-queue of programmed answers.";
- result += "\nanswerxml<2e/2c>|clear Clear programmed answers (to entity/client).";
- result += "\nanswerxml<2e/2c>|exhaust Disable the corresponding queue rotation, which is the default behaviour.";
- result += "\nanswerxml<2e/2c>|rotate Enable the corresponding queue rotation, useful in performance tests.";
- result += "\n Rotation consists in add again to the queue, each element retrieved for answering.";
- result += "\n";
- result += "\nSend operations are available using hexadecimal content (hex formatted files) which also allow to test";
- result += "\nspecial scenarios (protocol errors):";
- result += "\n";
- result += "\nsendhex2e|<source_file> Sends hex source file (pathfile) through configured entity.";
- result += "\nsendhex2c|<source_file> Sends hex source file (pathfile) to client.";
- result += "\n";
- result += "\nAnswer programming in hexadecimal is not really neccessary (you could use send primitives) and also";
- result += "\n is intended to be used with decoded messages in order to replace things like hop by hop, end to end,";
- result += "\n subscriber id, session id, etc. Anyway you could use 'decode' operation and then program the xml created.";
- result += "\n";
- result += "\nIf a request is received, answer map (built with 'answerxml<2e/2c>' operations) will be";
- result += "\n checked to find a corresponding programmed answer to be replied(*). If no ocurrence is found,";
- result += "\n or answer message was received, the message is forwarded to the other side (entity or client),";
- result += "\n or nothing but trace when no peer at that side is configured. Answer to client have sense when";
- result += "\n diameter server socket is configured, answer to entity have sense when entity does.";
- result += "\n";
- result += "\nIn the most complete situation (process with both client and server side) there are internally";
- result += "\n two maps with N FIFO queues, one for each different message code within programmed answers.";
- result += "\nOne map is for answers towards the client, and the other is to react entity requests. Then in";
- result += "\n each one we could program different answers corresponding to different request codes received.";
- result += "\n";
- result += "\n(*) sequence values (hop-by-hop and end-to-end), Session-Id and Subscription-Id avps, are mirrored";
- result += "\n to the peer which sent the request. If user wants to test a specific answer without changing it,";
- result += "\n use sendxml<2e/2c>/sendhex<2e/2c> operations better than programming.";
- result += "\n";
- result += "\nBalance ('--balance' command line parameter) could be used to forward server socket receptions through";
- result += "\n entity servers by mean a round-robin algorithm. Both diameter server socket and entity targets should";
- result += "\n have been configured, that is to say: launcher acts as client and server. If no balance is used, an";
- result += "\n standard delivery is performed: first primary entity server, secondary when fails, etc.";
- result += "\n";
- result += "\n--------------------------------------------------------------------------- Processing types (log tags)";
- result += "\n";
- result += "\nUsed as log file extensions (when '--splitLog' is provided on command line) and context preffixes on log";
- result += "\n details when unique log file is dumped:";
- result += "\n";
- result += "\n [sent2e/send2eError] Send to entity (success/error)";
- result += "\n [sent2c/send2cError] Send to client (success/error)";
- result += "\n [fwd2e/fwd2eError] Forward to entity a reception from client (success/error)";
- result += "\n [fwd2c/fwd2cError] Forward to client a reception from entity (success/error)";
- result += "\n [recvfc] Reception from client";
- result += "\n [recvfe] Reception from entity";
- result += "\n [req2c-expired] A request sent to client has been expired";
- result += "\n [req2e-expired] A request sent to entity has been expired";
- result += "\n [recvfc-ans-unknown] Reception from client of an unknown answer (probably former [req2c-expired]";
- result += "\n has been logged)";
- result += "\n [recvfe-ans-unknown] Reception from entity of an unknown answer (probably former [req2e-expired]";
- result += "\n has been logged)";
- result += "\n [retry] Request retransmission";
- result += "\n";
- result += "\n------------------------------------------------------------------------------------------- Burst tests";
- result += "\n";
- result += "\nIn order to simplify user experience, burst category operations are only allowed in single host node";
- result += "\n configuration. Indeed, you could send messages with unmatched Origin-Host, and no warning is shown.";
- result += "\nAll the operations are performed through the unique host: if you need to use more interfaces, you may";
- result += "\n launch different ADML instances. Is nonsense to allow burst in a multi-host configured ADML, because";
- result += "\n this feature is not able to coordinate the messages.";
- result += "\n";
- result += "\nburst|<action>[|parameter] Used for performance testing, we first program diameter requests";
- result += "\n messages in order to launch them from client side to the configured";
- result += "\n diameter entity. We could start the burst with an initial load";
- result += "\n (non-asynchronous sending), after this, a new request will be sent";
- result += "\n per answer received or expired context. There are 10 actions: clear,";
- result += "\n load, start, push, pop, stop, repeat, send, goto and look.";
- result += "\n";
- result += "\n burst|clear Clears all loaded burst messages.";
- result += "\n burst|load|<source_file> Loads the next diameter message into launcher burst.";
- result += "\n burst|start|<initial load> Starts (or restarts if already in progress) the message sending with";
- result += "\n a certain initial load.";
- result += "\n burst|push|<load amount> Sends specific non-aynchronous load.";
- result += "\n burst|pop|<release amount> Skip send burst messages in order to reduce over-the-air requests.";
- result += "\n Popping all OTA requests implies burst stop because no more answer";
- result += "\n will arrive to the process. Burst output file (--burstLog command";
- result += "\n line parameter) shows popped messages with crosses (x). Each cross";
- result += "\n represents one received answer for which no new request is sent.";
- result += "\n burst|stop Stops the burst cycle. You can resume pushing 1 load amount.";
- result += "\n burst|repeat[|[yes]|no] Restarts the burst launch when finish. If initial load or push load";
- result += "\n amount is greater than burst list size, they will be limited when";
- result += "\n the list is processed except when repeat mode is enabled.";
- result += "\n burst|send|<amount> Sends messages from burst list. The main difference with start/push";
- result += "\n operations is that burst won't be awaken. Externally we could control";
- result += "\n sending time (no request will be sent for answers).";
- result += "\n burst|goto|<order> Updates current burst pointer position.";
- result += "\n burst|look[|order] Show programmed burst message for order provided, current when missing.";
- result += "\n";
- result += "\n-------------------------------------------------------------------------------------- Advanced testing";
- result += "\n";
- result += "\n Burst mode only allows single interface interaction. For multiple interface";
- result += "\n (origin-host) coordination, you could use the advanced test cases programming:";
- result += "\n";
- result += "\n";
- result += "\n test|<id>|<command>[|parameters]";
- result += "\n";
- result += "\n Adds a new step to the test case with provided identifier. If provided identifier";
- result += "\n is not registered yet, a new test case will be created with that value and the";
- result += "\n step will be added as the first. For a specific 'id', the steps are stored in";
- result += "\n order as they are programmed. Check possible runtime exceptions when adding a";
- result += "\n new step because those which fail, will be ignored/skipped during test case";
- result += "\n programming giving an incomplete sequence invalid for the testing purpose.";
- result += "\n";
- result += "\n <id>: integer number, normally monotonically increased for each test case. Some external";
- result += "\n script/procedure shall clone a test case template in order to build a collection";
- result += "\n of independent and coherent test cases (normally same type) with different context";
- result += "\n values (Session-Id, Subscriber-Id, etc.).";
- result += "\n";
- result += "\n <command>: commands to be executed for the test id provided. Each command programmed";
- result += "\n constitutes a test case 'step', numbered from 1 to N, with an exception for";
- result += "\n 'description' which is used to describe the test case:";
- result += "\n";
- result += "\n description|<description> Sets a test case description. Test cases by default are";
- result += "\n constructed with description 'Testcase_<id>'.";
- result += "\n";
- result += "\n ip-limit[|amount] In-progress limit of test cases controlled from this test.";
- result += "\n No new test cases will be launched over this value (test";
- result += "\n manager tick work will be ignored). Zero-value is equivalent";
- result += "\n to stop the clock tick, -1 is used to specify 'no limit' which";
- result += "\n is the default. For missing amount, value of 1 is applied.";
- result += "\n";
- result += "\n timeout|<msecs> Sets an asynchronous timer to restrict the maximum timeout";
- result += "\n until last test step. Normally, this command is invoked";
- result += "\n in the first step, anyway it measures the time from the";
- result += "\n execution point whatever it is. The expiration will abort";
- result += "\n the test if still running. One or more timeouts could be";
- result += "\n programmed (not usual), but the more restrict will apply.";
- result += "\n It is highly recommended to program a initial timeout step,";
- result += "\n or the test case could be eternally in-progress.";
- result += "\n";
- result += "\n sendxml2e|<source_file>[|<step number>]";
- result += "\n Sends xml source file (pathfile) to entity (it would be a";
- result += "\n 'forward' event if it came through local server endpoint).";
- result += "\n Take into account that the xml message is encoded just on";
- result += "\n call. The xml file is not longer needed neither interpreted";
- result += "\n in case of modification, after calling this command.";
- result += "\n The step number should be provided for answers to indicate";
- result += "\n the 'wait for request' corresponding step. If you miss this";
- result += "\n reference, the sequence information (hop-by-hop, end-to-end)";
- result += "\n will be sent as they are in the answer xml message (realize";
- result += "\n the difficulty of predicting these information). Be sure to";
- result += "\n refer to a 'wait for request' step. Conditions like 'regexp'";
- result += "\n (as we will see later) are not verified.";
- result += "\n In the case of requests, the step number is used to force the";
- result += "\n copy of Session-Id value from the referred step.";
- result += "\n";
- result += "\n sendxml2c|<source_file>[|<step number>]";
- result += "\n Sends xml source file (pathfile) to client (it would be a";
- result += "\n 'forward' event if it came through remote server endpoint).";
- result += "\n Same commented for 'sendxml2e' regarding the step number.";
- result += "\n";
- result += "\n delay|<msecs> Blocking step until the time lapse expires. Useful to give ";
- result += "\n some cadence control and time schedule for a specific case.";
- result += "\n A value of 0 could be used as a dummy step.";
- result += "\n";
- result += "\n sh-command|<script> External execution for script/executable via shell through a dedicated";
- result += "\n thread, providing the command and parameters. You could use dynamic";
- result += "\n variables ##<tag> to have more flexibility:";
- result += "\n Test pool cycle id: "; result += SH_COMMAND_TAG_FOR_REPLACE__CYCLE_ID;
- result += "\n Test case id: "; result += SH_COMMAND_TAG_FOR_REPLACE__TESTCASE_ID;
- result += "\n Test step id: "; result += SH_COMMAND_TAG_FOR_REPLACE__TESTSTEP_ID;
- result += "\n";
- result += "\n For example, your command could be something like this:";
- result += "\n insert_sql_"; result += SH_COMMAND_TAG_FOR_REPLACE__TESTCASE_ID; result += ".sh -db dbname --verbose";
- result += "\n > /tmp/cycle-"; result += SH_COMMAND_TAG_FOR_REPLACE__CYCLE_ID;
- result += ".testcase-"; result += SH_COMMAND_TAG_FOR_REPLACE__TESTCASE_ID;
- result += ".teststep-"; result += SH_COMMAND_TAG_FOR_REPLACE__TESTSTEP_ID;
- result += ".out";
- result += "\n Try to redirect stdout and stderr to avoid ADML output contamination";
- result += "\n with the possible outputs from the scripts. You could also put your";
- result += "\n job in background although sh-command will return 0-value immediately.";
- result += "\n";
- result += "\n wait<fe/fc>-hex|<source_file>[|strict]";
- result += "\n Wait condition, from entity (waitfe-hex) or client (waitfc-hex) to";
- result += "\n match the hexadecimal representation for received messages against";
- result += "\n source file (hex format). Fix mode must be enabled to avoid unexpected";
- result += "\n matching behaviour. Specify 'strict' to use the hex content 'as is'.";
- result += "\n If not, the hex content will be understood as whole message and then,";
- result += "\n borders will be added (^<content>$) and sequence information bypassed";
- result += "\n even for diameter answers.";
- result += "\n";
- result += "\n wait<fe/fc>-xml|<source_file>[|strict]";
- result += "\n Wait condition from entity (waitfe-xml) or client (waitfc-xml) to";
- result += "\n match the serialized xml content for received messages against";
- result += "\n source file (xml representation). Fix mode must be enabled to avoid";
- result += "\n unexpected matching behaviour. If you need a strict matching you";
- result += "\n must add parameter 'strict', if not, regexp is built ignoring sequence";
- result += "\n information (hop-by-hop-id=\"[0-9]+\" end-to-end-id=\"[0-9]+\") and";
- result += "\n Origin-State-Id value.";
- result += "\n All LF codes will be internally removed when comparison is executed";
- result += "\n in order to ease xml content configuration.";
- result += "\n";
- result += "\n wait<fe/fc>|<condition> Blocking step until condition is fulfilled. The message could";
- result += "\n received from entity (waitfe) or from client (waitfc).";
- result += "\n CPU cost is lower than former 'wait<fe/fc>-<xml|hex>' variants.";
- result += "\n";
- result += "\n <condition>: Optional parameters which must be fulfilled to continue through the next step.";
- result += "\n Any received message over diameter interfaces will be evaluated against the";
- result += "\n corresponding test case starting from the current step until the first one";
- result += "\n whose condition is fulfilled. If no condition is fulfilled the event will be";
- result += "\n classified as 'uncovered' (normally a test case bad configuration, or perhaps";
- result += "\n a real unexpected message).";
-
- // TODO(***)
- // result += "\n The way to identify the test case, is through registered Session-Id values for";
- // result += "\n programmed requests. But this depends on the type of node. Acting as clients,";
- // result += "\n requests received have Session-Id values which are already registered with";
- // result += "\n one test case, causing an error if not found. Acting as servers, requests are";
- // result += "\n received over a diameter local server from a client which are generating that";
- // result += "\n Session-Id values. Then we know nothing about such values. The procedure in";
- // result += "\n this case is find out a test case not-started containing a condition which";
- // result += "\n comply with the incoming message, and reactivates it.";
- // The other solution: register Session-Id values for answers send to client from a local diameter server.
-
- result += "\n How to answer: a wait condition for a request will store the incoming message";
- result += "\n which fulfills that condition. This message is useful together with the peer";
- result += "\n connection source in a further send step configured with the corresponding";
- result += "\n response. You could also insert a delay between wait and send steps to be";
- result += "\n more realistic (processing time simulation in a specific ADML host node).";
- result += "\n Always, a response send step will get the needed information from the most";
- result += "\n recent wait step finding in reverse order (note that some race conditions";
- result += "\n could happen if your condition is not specific enough).";
-
- result += "\n";
- result += "\n Condition format:";
- result += "\n";
- result += "\n [code]|[bitR]|[hopByHop]|[applicationId]|[sessionId]|[resultCode]|[msisdn]|[imsi]|[serviceContextId]";
- result += "\n";
- result += "\n code: integer number";
- result += "\n bitR: 1 (request), 0 (answer)";
- result += "\n hopByHop: integer number or request send step reference: #<step number>";
- result += "\n";
- result += "\n Using the hash reference, you would indicate a specific wait condition";
- result += "\n for answers. The step number provided must correspond to any of the";
- result += "\n previous send commands (sendxml2e/sendxml2c) configured for a request.";
- result += "\n This 'hop-by-hop' variant eases the wait condition for answers in the";
- result += "\n safest way.";
- result += "\n";
- result += "\n applicationId: integer number";
- result += "\n sessionId: string";
- result += "\n resultCode: integer number";
- result += "\n msisdn: string";
- result += "\n imsi: string";
- result += "\n serviceContextId: string";
- result += "\n";
- result += "\n Take into account these rules, useful in general:";
- result += "\n";
- result += "\n - Be as much specific as possible defining conditions to avoid ambiguity sending";
- result += "\n messages out of context due to race conditions. Although you could program several";
- result += "\n times similar conditions, some risky practices will throw a warning trace (if you";
- result += "\n repeat the same condition within the same test case).";
- result += "\n - Adding a ResultCode and/or HopByHop to the condition are only valid waiting answers.";
- result += "\n - Requests hop-by-hop values must be different for all the test case requests.";
- result += "\n RFC says that a hop by hop must be unique for a specific connection, something that";
- result += "\n could be difficult to manage if we have multiple available connections from client";
- result += "\n side endpoint (entity or local server), even if we would have only one connection but";
- result += "\n several host interfaces. It is enough to configure different hop-by-hop values within";
- result += "\n each test case, because on reception, the Session-Id is used to identify that test case.";
- result += "\n";
- result += "\n";
- result += "\n";
- result += "\n";
- result += "\n Programming example:";
- result += "\n";
- result += "\n Basic Rx/Gx scenary: PCEF (Gx) - PCRF - AF (Rx)";
- result += "\n";
- result += "\n test|1|timeout|5000 (step 1: whole time requirement is 5 seconds)";
- result += "\n test|1|sendxml2e|CCR-I.xml (step 2: imagine this xml uses the Session-Id 'SGx')";
- result += "\n test|1|waitfe|272|0|||SGx|2001 (step 3: waits the CCA for the CCR-I with Result-Code = DIAMETER_SUCCESS)";
- result += "\n test|1|sendxml2e|AAR-flows.xml (step 4: imagine this xml uses the Session-Id 'SRx')";
- result += "\n test|1|waitfe|265|0|||SRx|2001 (step 5: waits the AAA for the AAR-flows with Result-Code = DIAMETER_SUCCESS)";
- result += "\n test|1|waitfe|258|1|||SGx (step 6: waits the RAR (install policies) from the PCRF server)";
- result += "\n test|1|sendxml2e|RAA-install.xml|6 (step 7: sends the response for the RAR)";
- result += "\n test|1|sendxml2e|CCR-T.xml (step 8: termination of the Gx session, imagine this xml puts hop-by-hop 'H1')";
- result += "\n test|1|waitfe|272|0|H1||SGx|2001 (step 9: waits the CCA for the CCR-T with Result-Code = DIAMETER_SUCCESS and hop-by-hop 'H1')";
- result += "\n test|1|waitfe|258|1|||SGx (step 10: waits the RAR (remove policies) from the PCRF server)";
- result += "\n test|1|sendxml2e|RAA-remove.xml|10 (step 11: sends the response for the RAR)";
- result += "\n";
- result += "\n Notes: We added an additional condition in step 9: the hop-by-hop. When we program the corresponding";
- result += "\n source request (CCR-T), we configured the value 'H1' for the hop-by-hop. This is an 'application";
- result += "\n value' because the real hop-by-hop transported through the client connection is managed by the";
- result += "\n diameter stack. But when returned, the transaction pool resolve the original value. This feature";
- result += "\n is necessary to ease the implementation of certain diameter agents (proxies for example). In our";
- result += "\n case, we could format the hop-by-hop values within the request templates with total freedom to";
- result += "\n improve the programmed conditions.";
- result += "\n";
- result += "\n In the case of 'waiting for requests' is not such easy. Indeed, steps 6 and 10 will write a warning";
- result += "\n because they are the same condition. We know that we are not going to have any problem because";
- result += "\n such events are blocking-protected regarding logic-dependent messages (CCR-T), and race condition";
- result += "\n is absolutely strange in this case.";
- result += "\n";
- result += "\n You could speed up the test case moving forward steps like 3 & 5, understood as non-strict requirements";
- result += "\n to continue testing. Anyway, remember that test cases should be as real as possible, and that there";
- result += "\n are many ways to increase the load rate as we will see in next section (test cases execution).";
- result += "\n";
- result += "\n Other simplifications: the steps 3, 5 and 9 can be replaced by";
- result += "\n";
- result += "\n test|1|waitfe||0|#2";
- result += "\n test|1|waitfe||0|#4";
- result += "\n test|1|waitfe||0|#8";
- result += "\n";
- result += "\n which means that hop-by-hop must be retrieved from steps 2, 4 and 8 respectively,";
- result += "\n and the expected message shall be an answer. Normally you will add other conditions,";
- result += "\n for example a DIAMETER_SUCCESS result (adding 2001 as Result-Code).";
- result += "\n";
- result += "\nTest cases execution:";
- result += "\n";
- result += "\n";
- result += "\n test|ttps|<amount> Starts/resume the provided number of test ticks per second (ttps). The ADML starts";
- result += "\n with the event trigger system suspended, and this operation is neccessary to begin";
- result += "\n those cases which need this time event (internal triggering). Some other test cases";
- result += "\n could be started through external events (first test case event could be programmed";
- result += "\n to wait specific message), but is not usual this external mode and neither usual to";
- result += "\n mix triggering types. Normally, you will pause/stop new test launchs providing 0 as";
- result += "\n ttps value, and also you could dynamically modify the load rate updating that value.";
- result += "\n If a test case has N messages then 'ttps * N' will be the virtual number of messages";
- result += "\n managed per second when no bottleneck exists.";
- result += "\n";
- result += "\n Provide 0 in order to stop the timer triggering.";
- result += "\n";
- result += "\n The timer manager resolution currently harcoded allows a maximum of ";
- result += anna::functions::asString(1000/a_admlMinResolution); result += " events";
- result += "\n per second. To reach greater rates ADML will join synchronously the needed number of";
- result += "\n new time-triggered test cases per a single event, writting a warning-level trace to";
- result += "\n advice about the risk of burst sendings and recommend launching multiple instances";
- result += "\n to achieve such load with a lower rate per instance.";
- result += "\n";
- result += "\n test|next[|<sync-amount>] Forces the execution of the next test case(s) without waiting for test manager tick.";
- result += "\n Provide an integer value for 'sync-amount' to send a burst synchronous amount of the";
- result += "\n next programmed test cases (1 by default). This event works regardless the timer tick";
- result += "\n function, but it is normally used with the test manager tick stopped.";
- result += "\n";
- result += "\n test|ip-limit[|amount] In-progress limit of test cases established from global context. This value will be";
- result += "\n overwritten if used at test case level when the corresponding test step is executed.";
- result += "\n Anyway, the meaning is the same in both contexts. But now, when the amount is missing,";
- result += "\n the limit and current amount of in-progress test cases will be shown.";
- result += "\n";
- result += "\n test|goto|<id> Updates current test pointer position.";
- result += "\n";
- result += "\n test|look[|id] Show programmed test case for id provided, current 'in-process' test case when missing.";
- result += "\n Test cases reports are not dumped on process context (too many information in general).";
- result += "\n The report contains context information in every moment: this operation acts as a snapshot.";
- result += "\n";
- result += "\n test|state[|id] Get test case state for id provided, current 'in-process' test case when missing.";
- result += "\n";
- result += "\n test|interact|amount[|id] Makes interactive a specific test case id. The amount is the margin of execution steps";
- result += "\n to be done. Normally, we will execute 'test|interact|0[|<test case id>]', which means that";
- result += "\n the test case is selected to be interactive, but no step is executed. Then you have to";
- result += "\n interact with positive amounts (usually 1), executing the provided number of steps if";
- result += "\n they are ready and fulfill the needed conditions. The value of 0, implies no execution";
- result += "\n steps margin, which could be useful to 'freeze' a test in the middle of its execution.";
- result += "\n You could also provide -1 to make it non-interactive resuming it from the current step.";
- result += "\n By default, current test case id is selected for interaction.";
- result += "\n";
- result += "\n test|reset|<[soft]/hard>[|id] Reset the test case for id provided, all the tests when missing. It could be hard/soft:";
- result += "\n - hard: you probably may need to stop the load rate before. This operation initializes";
- result += "\n all test cases regardless their states.";
- result += "\n - soft: only for finished cases (those with 'Success' or 'Failed' states). It does not";
- result += "\n affect to test cases with 'InProgress' state.";
- result += "\n";
- result += "\n test|repeats|<amount> Restarts the whole programmed test list when finished the amount number of times (repeats";
- result += "\n forever if value -1 is provided). This is disabled by default (amount = 0): testing trigger";
- result += "\n system will enter suspended state until new ttps operation is received and a soft reset has";
- result += "\n been done before. Test cases state & data will be reset (when achieved again), but general";
- result += "\n statistics and counters will continue measuring until reset with 'collect' operation.";
- result += "\n";
- result += "\n test|auto-reset|<soft|hard> When cycling, current test cases can be soft (default) or hard reset. If no timeout has";
- result += "\n been configured for the test case, hard reset could prevent stuck on the next cycle for";
- result += "\n those test cases still in progress.";
- result += "\n";
- result += "\n test|initialized Shows the number of initialized test cases. Zero-value means that everything was processed";
- result += " or not initiated yet.\n";
- result += "\n";
- result += "\n test|finished Shows the number of finished (successful or failed) test cases.";
- result += "\n";
- result += "\n test|clear Clears all the programmed test cases and stop testing (if in progress).";
- result += "\n";
- result += "\n test|junit Shows the junit report in the moment of execution.";
- result += "\n";
- result += "\n test|summary-counts Test manager counts report. Counts by state and prints total verdict.";
- result += "\n";
- result += "\n test|summary-states Test manager states report.";
- result += "\n";
- result += "\n test|summary Test manager general report (number of test cases, counts by state, global configuration,";
- result += "\n forced in-progress limitation, reports visibility, etc.). Be careful when you have reports";
- result += "\n enabled because the programmed test cases dumps could be heavy (anyway you could enable the";
- result += "\n dumps separately, for any of the possible states: Initialized, InProgress, Failed, Success).";
- result += "\n";
- result += "\n test|report|<initialized/in-progress/failed/success/[all]/none>[|[yes]|no]";
- result += "\n";
- result += "\n Enables/disables report generation for a certain test case state: initialized, in-progress,";
- result += "\n failed or success (also 'all' and 'none' reserved words could be used). This applies to report";
- result += "\n summary (former described operation) and automatic dumps during testing where only failed or";
- result += "\n successful states will appear: every time a test case is finished its xml representation will";
- result += "\n be dump on a file under the execution directory (or the one configured in process command-line";
- result += "\n 'tmDir') with the name:";
- result += "\n";
- result += "\n 'cycle-<cycle id>.testcase-<test case id>.xml'.";
- result += "\n";
- result += "\n By default, all the states are disabled to avoid IO overload. In most of cases not all the";
- result += "\n tests are going to fail then you could enable only such failed dumps. Anyway you could set";
- result += "\n the reports visibility to fit your needs in a given situation.";
- result += "\n";
- result += "\n test|report-hex[|[yes]|no] Reports could include the diameter messages in hexadecimal format. Disabled by default.";
- result += "\n";
- result += "\n test|dump-stdout[|[yes]|no] Test manager information is dumped into stdout.";
- result += "\n";
- result += "\n";
- result += "\n------------------------------------------------------------------------------------- Dynamic procedure";
- result += "\n";
- result += "\ndynamic[|args] This launch an internal operation implemented in 'Procedure' class.";
- result += "\n Its default implementation does nothing, but you could create a dynamic";
- result += "\n library 'libanna_launcherDynamic.so' and replace the one in this project.";
- result += "\n One interesting application consists in the use of the diameter API and";
- result += "\n event operation to create a set of libraries as the testing framework.";
- result += "\n To execute each test case, the ADML process would be executed with a";
- result += "\n specific library path. But the main use would be the stress programming";
- result += "\n to achieve a great amount of cloned (even mixed) tests without using";
- result += "\n the management operation interface by mean http or signals: a single";
- result += "\n call to 'dynamic' would be enough to start a cascade of internally";
- result += "\n implemented operations.";
- result += "\n This operation accepts a generic string argument (piped or not, as you";
- result += "\n desire and depending on your procedure implementation).";
- result += "\n";
- result += "\n This operation requires advanced programming and knowlegde of ANNA Diameter";
- result += "\n stack and testing framework, to take advantage of all the possibilities.";
- result += "\n";
- result += "\n";
- result += "\n";
- result += "\nUSING OPERATIONS INTERFACE";
- result += "\n--------------------------";
- result += "\n";
- result += "\n------------------------------------------------------------------------- Operations via HTTP interface";
- result += "\n";
- result += "\nAll the operations described above can be used through the optional HTTP interface. You only have";
- result += "\n to define the http server at the command line with something like: '--httpServer localhost:9000'.";
- result += "\nTo send the task, we shall build the http request body with the operation string. Some examples";
- result += "\n using curl client could be:";
- result += "\n";
- result += "\n curl -m 1 --data \"diameterServerSessions|4\" localhost:9000";
- result += "\n curl -m 1 --data \"code|ccr.xml\" localhost:9000";
- result += "\n curl -m 1 --data \"decode|ccr.hex\" localhost:9000";
- result += "\n curl -m 1 --data \"sendxml2e|ccr.xml\" localhost:9000";
- result += "\n etc.";
- result += "\n";
- result += "\n------------------------------------------------------------------------- Operations via SIGUSR2 signal";
- result += "\n";
- result += "\nThe alternative using SIGUSR2 signal requires the creation of the task(s) file which will be read at";
- result += "\n signal event:";
- result += "\n echo \"<operation>\" > "; result += getSignalUSR2InputFile();
- result += "\n then";
- result += "\n kill -12 <pid>";
- result += "\n or";
- result += "\n kill -s SIGUSR2 <pid>";
- result += "\n and then see the results:";
- result += "\n cat "; result += getSignalUSR2OutputFile();
- result += "\n";
- result += "\n (this file is ended with EOF final line, useful managing huge batch files to ensure the job completion)";
- result += "\n";
- result += "\nYou could place more than one line (task) in the input file. Output reports will be appended in that";
- result += "\n case over the output file. Take into account that all the content of the task file will be executed";
- result += "\n sinchronously by the process. If you are planning traffic load, better use the asynchronous http";
- result += "\n interface.";
- result += "\n";
- result += "\n";
-
- return result;
-}
-
void Launcher::logStatisticsSamples(const std::string &conceptsList) throw() {
anna::statistics::Engine &statEngine = anna::statistics::Engine::instantiate();
int op_size = operation.size();
std::string args = ((operation.find("dynamic|") == 0) && (op_size > 8)) ? operation.substr(8) : "";
if (args == "" && op_size != 7)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
try {
p.execute(args, response_content);
}
return true; // OK
}
- // Help:
- if(operation == "help") {
- response_content = help();
- return true; // OK
- }
-
// Reset performance data:
if(operation == "collect") {
resetCounters();
// No operation has more than 2 arguments except 'test' ...
if(opType != "test" && numParams > 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
// Check the number of parameters:
// Launch exception
std::string msg = "Wrong body content format on HTTP Request for '";
msg += opType;
- msg += "' operation (missing parameter/s). Use 'help' management command to see more information.";
+ msg += "' operation (missing parameter/s). Check 'HELP.md' for more information.";
throw anna::RuntimeException(msg, ANNA_FILE_LOCATION);
}
opt_response_content = "\n\n";
opt_response_content += getOperatedHost()->lookBurst(order);
} else {
- throw anna::RuntimeException("Wrong body content format on HTTP Request for 'burst' operation (unexpected action parameter). See help", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request for 'burst' operation (unexpected action parameter). Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
}
} else if((opType == "test")) {
// test|report-hex[|[yes]|no] Reports could include the diameter messages in hexadecimal format. Disabled by default.
// test|goto|<id> Updates current test pointer position.
// test|look[|id] Show programmed test case for id provided, current when missing ...
+ // test|state[|id] Show test case state for id provided, current when missing ...
// test|interact|amount|id Makes interactive a specific test case id. The amount is the margin of execution steps ...
// test|reset|<[soft]/hard>[|id] Reset the test case for id provided, all the tests when missing ...
// test|auto-reset|<soft|hard> When cycling, current test cases can be soft (default) or hard reset ...
if(param1 == "ttps") {
if (numParams > 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
bool success = ((param2 != "") ? testManager.configureTTPS(atoi(param2.c_str())) : false);
if (success) {
}
else if (param1 == "next") {
if (numParams > 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
int sync_amount = ((param2 != "") ? atoi(param2.c_str()) : 1);
}
else if(param1 == "ip-limit") {
if (numParams > 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
unsigned int limit;
if (param2 != "") {
}
else if(param1 == "repeats") {
if (numParams != 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
int repeats = atoi(param2.c_str());
if (repeats < 0) repeats = -1;
testManager.setPoolRepeats(repeats);
}
else if(param1 == "report") {
if (numParams > 3)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param2 == "") param2 = "all";
if(param3 == "") param3 = "yes";
testManager.setDumpAllReports(enable);
}
else
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
opt_response_content += (enable ? "report enabled " : "report disabled ");
opt_response_content += "for tests in '";
}
else if(param1 == "report-hex") {
if (numParams > 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param2 == "") param2 = "yes";
testManager.setDumpHex((param2 == "yes"));
}
else if(param1 == "dump-stdout") {
if (numParams > 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param2 == "") param2 = "yes";
testManager.setDumpStdout((param2 == "yes"));
}
else if(param1 == "goto") {
if (numParams > 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param2 == "") throw anna::RuntimeException("Missing id for test goto operation", ANNA_FILE_LOCATION);
int id = atoi(param2.c_str());
}
else if(param1 == "look") {
if (numParams > 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
int id = ((param2 != "") ? atoi(param2.c_str()) : -1);
anna::testing::TestCase *testCase = testManager.findTestCase(id);
}
else if(param1 == "state") {
if (numParams > 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
int id = ((param2 != "") ? atoi(param2.c_str()) : -1);
anna::testing::TestCase *testCase = testManager.findTestCase(id);
}
else if (param1 == "interact") {
if (numParams != 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
int amount = atoi(param2.c_str());
if (amount < -1)
}
else if(param1 == "reset") {
if (numParams > 3)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param2 == "") param2 = "soft";
if (param2 != "soft" && param2 != "hard")
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
int id = ((param3 != "") ? atoi(param3.c_str()) : -1);
anna::testing::TestCase *testCase = ((id != -1) ? testManager.findTestCase(id) : NULL);
}
else if(param1 == "auto-reset") {
if (numParams != 2)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if (param2 != "soft" && param2 != "hard")
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
testManager.setAutoResetHard(param2 == "hard");
opt_response_content += anna::functions::asString("Auto-reset configured to '%s'", param2.c_str());
}
else if(param1 == "initialized") {
if (numParams > 1)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
opt_response_content = anna::functions::asString("%lu", testManager.getInitializedCount());
}
else if(param1 == "finished") {
if (numParams > 1)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
opt_response_content = anna::functions::asString("%lu", testManager.getFinishedCount());
}
else if(param1 == "clear") {
if (numParams > 1)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if (testManager.clearPool()) {
opt_response_content = "all the programmed test cases have been dropped";
// Commands:
if (param2 == "description") {
if (numParams > 3)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param3 == "") throw anna::RuntimeException("Missing description for test case", ANNA_FILE_LOCATION);
testManager.getTestCase(id)->setDescription(param3); // creates / reuses
}
else if (param2 == "ip-limit") {
if (numParams > 3)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
unsigned int limit = (param3 == "") ? 1 : atoi(param3.c_str());
testManager.getTestCase(id)->addIpLimit(limit); // creates / reuses
}
else if (param2 == "timeout") {
if (numParams > 3)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param3 == "") throw anna::RuntimeException("Missing milliseconds for 'timeout' command in test id operation", ANNA_FILE_LOCATION);
anna::Millisecond timeout = checkTimeMeasure("Test case timeout", param3);
testManager.getTestCase(id)->addTimeout(timeout); // creates / reuses
}
else if ((param2 == "sendxml2e")||(param2 == "sendxml2c")) {
if (numParams > 4)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param3 == "") throw anna::RuntimeException(anna::functions::asString("Missing xml file for '%s' command in test id operation", param2.c_str()), ANNA_FILE_LOCATION);
codecMsg.loadXMLFile(param3);
LOGWARNING(
}
else if (param2 == "delay") {
if (numParams > 3)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param3 == "") throw anna::RuntimeException("Missing milliseconds for 'delay' command in test id operation", ANNA_FILE_LOCATION);
anna::Millisecond delay = ((param3 == "0" /* special case */) ? (anna::Millisecond)0 : checkTimeMeasure("Test case delay step", param3));
testManager.getTestCase(id)->addDelay(delay); // creates / reuses
}
+
+// TODO(***)
+// The way to identify the test case, is through registered Session-Id values for
+// programmed requests. But this depends on the type of node. Acting as clients,
+// requests received have Session-Id values which are already registered with
+// one test case, causing an error if not found. Acting as servers, requests are
+// received over a diameter local server from a client which are generating that
+// Session-Id values. Then we know nothing about such values. The procedure in
+// this case is find out a test case not-started containing a condition which
+// comply with the incoming message, and reactivates it.
+// The other solution: register Session-Id values for answers send to client from a local diameter server.
else if ((param2 == "waitfe")||(param2 == "waitfc")) {
if (numParams > 11)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if (param3 != "" || param4 != "" || param5 != "" || param6 != "" || param7 != "" || param8 != "" || param9 != "" || param10 != "" || param11 != "") {
bool fromEntity = (param2.substr(4,2) == "fe");
testManager.getTestCase(id)->addWaitDiameter(fromEntity, param3, param4, param5, param6, param7, param8, param9, param10, param11);
}
else if ((param2 == "waitfe-hex")||(param2 == "waitfc-hex")) {
if (numParams > 4)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param3 == "") throw anna::RuntimeException(anna::functions::asString("Missing hex file for '%s' command in test id operation", param2.c_str()), ANNA_FILE_LOCATION);
// Get DataBlock from file with hex content:
}
else if ((param2 == "waitfe-xml")||(param2 == "waitfc-xml")) {
if (numParams > 4)
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param3 == "") throw anna::RuntimeException(anna::functions::asString("Missing xml file for '%s' command in test id operation", param2.c_str()), ANNA_FILE_LOCATION);
// Get xml content from file:
else if (param2 == "sh-command") {
// Allow pipes in command:
//if (numParams > 4)
- // throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ // throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
if(param3 == "") throw anna::RuntimeException("Missing script/executable command-line for 'sh-command' in test id operation", ANNA_FILE_LOCATION);
std::string token = "|sh-command|";
std::string command = operation.substr(operation.find(token) + token.size());
testManager.getTestCase(id)->addCommand(command); // creates / reuses
}
else {
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
}
}
getOperatedEntity()->getReactingAnswers()->addMessage(code, message);
}
} else {
- throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Check 'HELP.md' for more information.", ANNA_FILE_LOCATION);
}
// HTTP response
projects / anna.git / blobdiff