Portability issues

[anna.git] / example / diameter / launcher / DEPLOY.sh

diff --git a/example/diameter/launcher/DEPLOY.sh b/example/diameter/launcher/DEPLOY.sh
index d574860..e387526 100755 (executable)
--- a/example/diameter/launcher/DEPLOY.sh
+++ b/example/diameter/launcher/DEPLOY.sh
@@ -2,7 +2,8 @@
 
 # Functions & variables
 SETUPS_DIR=../../../source/diameter/stack/setups
-MSGDTD_DIR=../../../source/diameter/codec/message.dtd
+MSGDTD=../../../include/anna/diameter/codec/message.dtd
+DCTDTD=../../../include/anna/diameter/stack/dictionary.dtd
 BASE_PROT=commands_baseProtocol.xml
 EXEC=/opt/bin/anna/example_diameter_launcher
 DPATH_dflt=$HOME/ADL
@@ -16,50 +17,45 @@ _exit () {
 
 createRunScript () {
 
-echo "#!/bin/ksh" > run.sh
-echo "EXE=\`cat .exe 2>/dev/null\`" >> run.sh
-echo "STARTED=\`ps -fea | grep \"\$EXE\" | grep -v grep\`" >> run.sh
-echo "[ \"\$EXE\" != \"\" -a \"\$STARTED\" != \"\" ] && { echo \"Already started!\"; echo \"\$STARTED\" ; exit ; }" >> run.sh
-echo "pre-start.sh" >> run.sh
-echo "> launcher.traces" >> run.sh
-echo "EXE=\"ndl_\`date '+%Y%m%d%H%M%S'\`\"" >> run.sh
-echo "echo \$EXE > .exe"  >> run.sh
-#echo "rm \$EXE 2>/dev/null" >> run.sh
-echo "echo ; echo \"Executable paths:\" ; echo" >> run.sh
-echo "for i in \`ls execs/.*/*\` ; do echo \$i ; done" >> run.sh
-echo "echo ; echo \"Input the executable path:\" ; read path ; while test \"\$path\" = \"\" ; do read path ; done" >> run.sh
-echo "ln -s \$path \$EXE" >> run.sh
-echo >> run.sh
-echo -n "\$EXE " >> run.sh
-for i in `cat args.txt | grep -v "^#"`
-do
-   echo -n "$i " >> run.sh
-done
-echo "&" >> run.sh
-chmod a+x run.sh
-rm args.txt
+  echo "#!/bin/ksh" > run.sh
+  echo "EXE=\`cat .exe 2>/dev/null\`" >> run.sh
+  echo "STARTED=\`ps -fea | grep \"\$EXE\" | grep -v grep\`" >> run.sh
+  echo "[ \"\$EXE\" != \"\" -a \"\$STARTED\" != \"\" ] && { echo \"Already started!\"; echo \"\$STARTED\" ; exit ; }" >> run.sh
+  echo "./pre-start.sh" >> run.sh
+  echo "> launcher.traces" >> run.sh
+  echo "EXE=\"./ADL-launcher\"" >> run.sh
+  echo "echo \$EXE > .exe"  >> run.sh
+  echo >> run.sh
+  echo -n "\$EXE " >> run.sh
+  for i in `cat args.txt | grep -v "^#"`
+  do
+    echo -n "$i " >> run.sh
+  done
+  echo "&" >> run.sh
+  chmod a+x run.sh
+  rm args.txt
 }
 
 createDictionaryPaths () {
 
 
 for i in stacks/*commands*xml
-do
-   stacks/dependence.sh $i >/dev/null
-   stack=`basename $i`
-   if test "$stack" != "$BASE_PROT"
-   then
+  do
+    stacks/dependence.sh $i >/dev/null
+    stack=`basename $i`
+    if test "$stack" != "$BASE_PROT"
+    then
       > .dictionary__${stack}
       for j in `cat ${i}.dep`
       do
-         echo "${j},\c" >> .dictionary__${stack}
+        echo -n "${j}," >> .dictionary__${stack}
       done
       echo "stacks/$BASE_PROT,stacks/${stack}" >> .dictionary__${stack}
-   fi
-done
+    fi
+  done
 
-# Default:
-ln -s .dictionary__commands_qosControl.xml .dictionary
+  # Default:
+  ln -s .dictionary__commands_qosControl.xml .dictionary
 }
 
 #############
@@ -70,22 +66,25 @@ echo "---------------------------------------"
 echo "Anna Diameter Launcher (ADL) deployment"
 echo "---------------------------------------"
 echo
-echo "Input deployment path [$DPATH_dftl]:"
+echo "Input deployment path [$DPATH_dflt]:"
 read DPATH
 [[ "$DPATH" = "" ]] && DPATH=$DPATH_dflt
-mkdir -p $DPATH
-mkdir $DPATH/stacks
+[[ -d $DPATH ]] && _exit "The path '$DPATH' already exists. Remove it before continue..."
 
 echo "Basic checkings ..."
-[[ ! -f $EXEC ]] && salir "Anna Diameter Launcher (ADL) is not installed in the system. Execute 'sudo scons install' for 'anna' suite."
-[[ ! -d $SETUPS_DIR ]] && salir "Diameter stacks not found ($SETUPS_DIR). Perhaps you executed '$0' out of its parent path."
+[[ ! -f $EXEC ]] && _exit "Anna Diameter Launcher (ADL) is not installed in the system. Execute 'sudo scons install' for 'anna' suite."
+[[ ! -d $SETUPS_DIR ]] && _exit "Diameter stacks not found ($SETUPS_DIR). Perhaps you executed this script out of its parent path."
 
 echo "Copying ..."
-cp $EXEC $DPATH/launcher
+mkdir -p $DPATH
+mkdir -p $DPATH/stacks
+cp $EXEC $DPATH/ADL-launcher
 cp resources/* $DPATH
 cp $SETUPS_DIR/*xml $DPATH/stacks
 cp $SETUPS_DIR/*sh $DPATH/stacks
-cp $MSGDTD_DIR $DPATH
+cp $SETUPS_DIR/readme.txt $DPATH/stacks
+cp $MSGDTD $DPATH
+cp $DCTDTD $DPATH
 
 echo "Preparing ..."
 cd $DPATH
@@ -94,16 +93,11 @@ createDictionaryPaths
 cd - >/dev/null
 
 # Help:
-echo "Stacks available at '.dictionary__<stack description>', create a symbolic link from '.dictionary'." >> tmp/README
-echo "Template for xml messages: message.dtd (informative, not actually required by process)" >> tmp/README
-echo "Start with 'run.sh'" >> tmp/README
-
-mv tmp ADL-installer
-tar cvfz ADL-installer.tar.gz ADL-installer
-rm -rf ADL-installer
-
 echo
-echo "Created ADL-installer.tar.gz !"
+echo "Go to '$DPATH' and see README file"
+echo
+echo "Done!"
+echo
 echo