\n\
originRealm: Node identifier (Origin-Realm name).\n\
applicationId: The Application-Id provided must exists as a registered 'stack id'.\n\
- originHost: Diameter application host name (system name). If missing, process sets o.s. hostname\n\
+ originHost: Diameter application host name (system name). If missing, process sets o.s. hostname.\n\
Note that if you have two or more realms, the names must be different.\n\
cer: User defined CER path file to be encoded to establish diameter connections.\n\
- If missing, will be harcoded\n\
+ If missing, will be harcoded.\n\
dwr: User defined DWR path file to be encoded for diameter protocol keep alive.\n\
- If missing, will be harcoded\n\
+ If missing, will be harcoded.\n\
allowedInactivityTime: Milliseconds for the maximum allowed inactivity time on server sessions born over the\n\
- local server before being reset. If missing, default value of 90000 will be assigned\n\
+ local server before being reset. If missing, default value of 90000 will be assigned.\n\
tcpConnectDelay: Milliseconds to wait TCP connect to any server. If missing, default value of 200 will\n\
be assigned\n\
answersTimeout: Milliseconds to wait pending application answers from diameter peers. If missing,\n\
- default value of 10000 will be assigned\n\
+ default value of 10000 will be assigned.\n\
ceaTimeout: Milliseconds to wait CEA from diameter server. If missing, default value of 'answersTimeout'\n\
- will be assigned\n\
+ will be assigned.\n\
watchdogPeriod: Milliseconds for watchdog timer (Tw) for diameter keep-alive procedure. If missing, default\n\
- value of 30000 will be assigned\n\
+ value of 30000 will be assigned.\n\
entity: Target diameter entity (comma-separated '<address>:<port>' format).\n\
- For example: 10.20.30.40:3868,10.20.30.41:3868. If missing, no entity will be enabled\n\
- entityServerSessions: Diameter entity server sessions (0: diameter entity disabled). Default value of 1\n\
+ For example: 10.20.30.40:3868,10.20.30.41:3868. If missing, no entity will be enabled.\n\
+ entityServerSessions: Diameter entity server sessions (0: diameter entity disabled). Default value of 1.\n\
diameterServer: Diameter own server address in '<address>:<port>' format. For example: 10.20.30.40:3868.\n\
- If missing, no local server will be enabled\n\
- diameterServerSessions: Diameter own server available connections (0: diameter server disabled). Default value of 1\n\
+ If missing, no local server will be enabled.\n\
+ diameterServerSessions: Diameter own server available connections (0: diameter server disabled). Default value of 1.\n\
+ Negative value implies no limit accepting incoming connections.\n\
balance: Balance over entity servers instead of doing standard behaviour (first primary, secondary\n\
- if fails, etc.). Default value 'no'\n\
+ if fails, etc.). Default value 'no'.\n\
sessionBasedModelsClientSocketSelection: By default, round-robin will be applied for IEC model (SMS/MMS), and Session-Id Low Part\n\
will be analyzed for ECUR/SCUR model (data, voice and content). You could change ECUR/SCUR\n\
analysis behaviour providing 'SessionIdHighPart', 'SessionIdOptionalPart' (atoi applied;\n\
- usually subscriber id data, i.e. MSISDN or IMSI) and 'RoundRobin' (also 'SessionIdLowPart')\n\
- retries: Expired responses will cause a number of request retransmissions. Disabled by default (0 retries)\n\
+ usually subscriber id data, i.e. MSISDN or IMSI) and 'RoundRobin' (also 'SessionIdLowPart').\n\
+ retries: Expired responses will cause a number of request retransmissions. Disabled by default (0 retries).\n\
log: Process log file (operations result, traffic log, etc.). By default '<originRealm>.launcher.log'.\n\
Empty string or \"null\" name, to disable. Warning: there is no rotation for log files\n\
- (use logrotate or whatever you consider)\n\
+ (use logrotate or whatever you consider).\n\
splitLog: Splits log file (appends to log filename, extensions with the type of event: see help on\n\
startup information-level traces). No log files for code/decode and load operations are created.\n\
- Default value 'no'\n\
+ Default value 'no'.\n\
detailedLog: Insert detailed information at log files. Should be disabled on automatic tests. Useful on\n\
- 'balance' mode to know messages flow along the sockets. Default value 'no'\n\
+ 'balance' mode to know messages flow along the sockets. Default value 'no'.\n\
dumpLog: Write to disk every incoming/outcoming message named as:\n\
'<originRealm>.<hop by hop>.<end to end>.<message code>.<request|answer>.<type of event>.xml'\n\
- Default value 'no'\n\
+ Default value 'no'.\n\
burstLog: Burst operations log file. By default '<originRealm>.launcher.burst'. Empty string or \"null\" name, to disable.\n\
Warning: there is no rotation for log files (use logrotate or whatever). Output: dot (.) for each\n\
burst message sent/pushed, cross (x) for popped ones, and order number when multiple of 1% of burst\n\
- list size, plus OTA requests when changed\n\
+ list size, plus OTA requests when changed.\n\
\n\
-->\n\
\n\
result += "\n Test cases reports are not dumped on process context (too many information in general).";
result += "\n The report contains context information in every moment: this operation acts as a snapshot.";
result += "\n";
- result += "\n test|report[|[yes]|no] Every time a test case is finished, its xml representation will be dump on a file under";
- result += "\n the execution directory (or the one configured in process command-line 'tmDir') with";
- result += "\n the name 'cycle-<cycle id>.testcase-<test case id>.xml'. This option is disabled by";
- result += "\n default reducing IO. ADML process context won't show test manager whole information";
- result += "\n because it could be a huge amount of data to write. Anyway, you could use the 'look'";
- result += "\n operation to see the desired report(s).";
- result += "\n";
- result += "\n test|report-hex[|[yes]|no] Reports could include the diameter messages in hexadecimal format. Disabled by default.";
- result += "\n";
result += "\n test|interact|amount|id Makes interactive a specific test case id. The amount is the margin of execution steps";
result += "\n to be done. Normally, we will execute 'test|interact|0|<test case id>', which means that";
result += "\n the test case is selected to be interactive, but no step is executed. Then you have to";
result += "\n";
result += "\n test|summary Test manager general report (number of test cases, counts by state, global configuration,";
result += "\n forced in-progress limitation, reports visibility, etc.). Be careful when you have reports";
- result += "\n dumps enabled because all the programmed test cases will be dump and that could be heavy.";
+ result += "\n enabled because the programmed test cases dumps could be heavy (anyway you could enable the";
+ result += "\n dumps separately, for any of the possible states: Initialized, InProgress, Failed, Success).";
+ result += "\n";
+ result += "\n test|report|<initialized/in-progress/failed/success/all>[|[yes]|no]";
+ result += "\n";
+ result += "\n Enables/disables report generation for a certain test case state: initialized, in-progress,";
+ result += "\n failed or success. This applies to report summary (former described operation) and automatic";
+ result += "\n dumps during testing where only failed or success states will appear: every time a test case";
+ result += "\n is finished its xml representation will be dump on a file under the execution directory (or";
+ result += "\n the one configured in process command-line 'tmDir') with the name:";
+ result += "\n";
+ result += "\n 'cycle-<cycle id>.testcase-<test case id>.xml'.";
+ result += "\n";
+ result += "\n By default, all the states are disabled to avoid IO overload. In most of cases not all the";
+ result += "\n tests are going to fail and you could enable only such failed dumps, but you can enable all";
+ result += "\n the types if you want (use reserved word 'all' for this).";
+ result += "\n";
+ result += "\n test|report-hex[|[yes]|no] Reports could include the diameter messages in hexadecimal format. Disabled by default.";
result += "\n";
result += "\n";
result += "\nUSING OPERATIONS INTERFACE";
}
} else if((opType == "test")) {
- // test|<id>|<command>[|parameters] Add a new step to the test case ...
- // test|ttps|<amount> Starts/resume the provided number of time ticks per second (ttps). The ADML starts ...
- // test|next[|<sync-amount>] Forces the execution of the next test case(s) without waiting for test manager tick ...
- // test|ip-limit[|amount] In-progress limit of test cases. No new test cases will be launched over this value ...
- // test|repeats|<amount> Restarts the whole programmed test list when finished the amount number of times ...
- // test|report[|[yes]|no] Every time a test case is finished a report file in xml format will be created under ...
- // test|report-hex[|[yes]|no] Reports could include the diameter messages in hexadecimal format. Disabled by default.
- // test|goto|<id> Updates current test pointer position.
- // test|look[|id] Show programmed test case for id provided, current when missing ...
- // test|interact|amount|id Makes interactive a specific test case id. The amount is the margin of execution steps ...
- // test|reset|<soft/hard>[|id] Reset the test case for id provided, all the tests when missing ...
- // test|clear Clears all the programmed test cases.
- // test|summary Test manager general report (number of test cases, counts by state ...
+ // test|<id>|<command>[|parameters] Add a new step to the test case ...
+ // test|ttps|<amount> Starts/resume the provided number of time ticks per second (ttps). The ADML starts ...
+ // test|next[|<sync-amount>] Forces the execution of the next test case(s) without waiting for test manager tick ...
+ // test|ip-limit[|amount] In-progress limit of test cases. No new test cases will be launched over this value ...
+ // test|repeats|<amount> Restarts the whole programmed test list when finished the amount number of times ...
+ // test|report|<initialized/in-progress/failed/success/all>[|[yes]|no]
+ // Enables/disables report generation for a certain test case state: initialized, in-progress ...
+ // test|report-hex[|[yes]|no] Reports could include the diameter messages in hexadecimal format. Disabled by default.
+ // test|goto|<id> Updates current test pointer position.
+ // test|look[|id] Show programmed test case for id provided, current when missing ...
+ // test|interact|amount|id Makes interactive a specific test case id. The amount is the margin of execution steps ...
+ // test|reset|<soft/hard>[|id] Reset the test case for id provided, all the tests when missing ...
+ // test|clear Clears all the programmed test cases.
+ // test|summary Test manager general report (number of test cases, counts by state ...
if(param1 == "ttps") {
opt_response_content += anna::functions::asString("Pool repeats: %d%s (current cycle: %d)", repeats, nolimit.c_str(), testManager.getPoolCycle());
}
else if(param1 == "report") {
- if (numParams > 2)
+ if (numParams > 3)
throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
- if(param2 == "") param2 = "yes";
- testManager.setDumpReports((param2 == "yes"));
- opt_response_content += (testManager.getDumpReports() ? "report enabled" : "report disabled");
+ if(param2 != "initialized" && param2 != "in-progress" && param2 != "failed" && param2 != "success" && param2 != "all")
+ throw anna::RuntimeException("Wrong body content format on HTTP Request. Use 'help' management command to see more information.", ANNA_FILE_LOCATION);
+
+ if(param3 == "") param3 = "yes";
+ bool enable = (param3 == "yes");
+
+ if(param2 == "initialized")
+ testManager.setDumpInitializedReports(enable);
+ else if(param2 == "in-progress")
+ testManager.setDumpInProgressReports(enable);
+ else if(param2 == "failed")
+ testManager.setDumpFailedReports(enable);
+ else if(param2 == "success")
+ testManager.setDumpSuccessReports(enable);
+ else // all
+ testManager.setDumpAllReports(enable);
+
+ opt_response_content += (enable ? "report enabled " : "report disabled ");
+ opt_response_content += "for tests in '";
+ opt_response_content += param2;
+ opt_response_content += "' state";
}
else if(param1 == "report-hex") {
if (numParams > 2)
projects / anna.git / blobdiff