}
}
+#define SIGUSR2_TASKS_INPUT_FILENAME "./sigusr2.tasks.input"
+#define SIGUSR2_TASKS_OUTPUT_FILENAME "./sigusr2.tasks.output"
+
// Auxiliary message for sendings
anna::diameter::comm::Message G_commMsgSent2c, G_commMsgSent2e, G_commMsgFwd2c, G_commMsgFwd2e;
void evRequest(anna::comm::ClientSocket&, const anna::http::Request& request) throw(anna::RuntimeException);
void evResponse(anna::comm::ClientSocket&, const anna::http::Response&) throw(anna::RuntimeException) {;}
- void sendOperation(const std::string &, std::string &) throw(anna::RuntimeException);
};
class MyCommunicator : public anna::comm::Communicator {
void baseProtocolSetupAsClient(void) throw(anna::RuntimeException);
anna::diameter::comm::Entity *getEntity() throw() { return a_entity; }
anna::diameter::comm::LocalServer* getDiameterLocalServer() throw() { return a_diameterLocalServer; }
+ void eventOperation(const std::string &, std::string &) throw(anna::RuntimeException);
bool logEnabled() const throw() { return (((a_logFile == "") || (a_logFile == "null")) ? false : true); }
void writeLogFile(const anna::DataBlock & db, const std::string &logExtension, const std::string &detail) const throw();
void writeLogFile(const anna::diameter::codec::Message & decodedMessage, const std::string &logExtension, const std::string &detail) const throw();
anna::xml::Node* asXML(anna::xml::Node* parent) const throw();
void resetStatistics() throw() { a_myDiameterEngine->resetStatistics(); }
void resetCounters() throw();
+ void signalUSR2() throw(anna::RuntimeException);
std::string help() const throw();
std::string programmedAnswers2e() const throw();
std::string programmedAnswers2c() const throw();
oamDiameterComm.resetCounters();
}
+void Launcher::signalUSR2() throw(anna::RuntimeException) {
+
+ LOGNOTICE(
+ std::string msg = "Captured signal SIGUSR2. Reading tasks at '";
+ msg += SIGUSR2_TASKS_INPUT_FILENAME;
+ msg += "' (results will be written at '";
+ msg += SIGUSR2_TASKS_OUTPUT_FILENAME;
+ msg += "')";
+ anna::Logger::notice(msg, ANNA_FILE_LOCATION);
+ );
+
+ // Operation:
+ std::string line;
+ std::string response_content;
+
+ std::ifstream in_file (SIGUSR2_TASKS_INPUT_FILENAME);
+ std::ofstream out_file (SIGUSR2_TASKS_OUTPUT_FILENAME);
+
+ if (!in_file.is_open()) throw RuntimeException("Unable to read tasks", ANNA_FILE_LOCATION);
+ if (!out_file.is_open()) throw RuntimeException("Unable to write tasks", ANNA_FILE_LOCATION);
+
+ while (getline (in_file, line))
+ {
+ LOGDEBUG(
+ std::string msg = "Processing line: ";
+ msg += line;
+ anna::Logger::debug(msg, ANNA_FILE_LOCATION);
+ );
+
+ try {
+ eventOperation(line, response_content);
+ } catch (RuntimeException &ex) {
+ ex.trace();
+ }
+ out_file << response_content;
+ }
+ in_file.close();
+ out_file.close();
+}
+
+
std::string Launcher::help() const throw() {
std::string result = "\n";
result += "\n ------------- HELP -------------\n";
+ result += "\n";
+ result += "\nOVERVIEW";
+ result += "\n--------";
+ result += "\n";
result += "\nThe ADL (ANNA Diameter Launcher) process is a complete diameter agent with client and server";
- result += "\ncapabilities as well as balancer (proxy) features. It could be used as diameter server";
- result += "\n(i.e. to simulate PCRF nodes, OCS systems, etc.), as diameter client (GGSNs, DPIs, etc.)";
- result += "\nand balancer systems to provide failover to external round-robin launchers). Also, auxiliary";
- result += "\nencoder/decoder/loader function could be deployed to reinterpret certain external flow and";
- result += "\nsend it to another process.";
+ result += "\n capabilities as well as balancer (proxy) features. It could be used as diameter server";
+ result += "\n (i.e. to simulate PCRF nodes, OCS systems, etc.), as diameter client (GGSNs, DPIs, etc.),";
+ result += "\n and balancer systems to provide failover to external round-robin launchers. Also, auxiliary";
+ result += "\n encoder/decoder/loader function could be deployed to reinterpret certain external flow and";
+ result += "\n send it to another process.";
result += "\n";
- result += "\nAs any other ANNA process, context dump could be retrieved sending -10 signal:";
- result += "\n kill -10 <pid> ; vi /var/tmp/anna.context.<pid>";
+ result += "\nThe ANNA::diameter_comm built-in module provides a great set of characteristics as multiple connections";
+ result += "\n on both server and client side, definition for multiple-server entities (and not only two as standard";
+ result += "\n establish as minimum), separate statistics analyzer per each resource, automatic CER/CEA and DWR/DWA";
+ result += "\n generation, expiration control and many more features.";
+ result += "\n";
+ result += "\nProcess traces are dump on \"launcher.traces\" and could have any trace level (POSIX levels), usually";
+ result += "\n 'debug' or 'warning'. See ANNA documentation for more details.";
+ result += "\n";
+ result += "\nAs any other ANNA process, context dump could be retrieved sending SIGUSR1 signal:";
+ result += "\n kill -10 <pid>";
+ result += "\n or";
+ result += "\n kill -s SIGUSR1 <pid>";
+ result += "\n and then";
+ result += "\n vi /var/tmp/anna.context.<pid>";
result += "\n";
result += "\nA complete xml report will show all the context information (counters, alarms, statistics,";
- result += "\nhandlers, diameter dictionary, etc.), and a powerful log module could dump all the events";
- result += "\nprocessed and flow information. Statistics could be analized at context dump and optionally";
- result += "\nwritten to disk as sample files with all the events measurements.";
+ result += "\n handlers, diameter dictionary, etc.), and a powerful log module could dump all the events";
+ result += "\n processed and flow information. Statistics could be analized at context dump and optionally";
+ result += "\n written to disk as sample files (useful for graphs and spreadsheet reports) with all the";
+ result += "\n measurements.";
result += "\n";
- result += "\nProcess traces are dump on \"launcher.traces\" and could have any trace level (POSIX levels):";
- result += "\nusually 'debug' or 'warning'. See ANNA documentation.";
+ result += "\nAlso SIGUSR2 is handled for management purposes. We will talk later about this.";
result += "\n";
- result += "\nThe ANNA::diameter_comm built-in module provide a great set of characteristics as multiple connections";
- result += "\non both server and client side, definition for multiple-server entities (and not only two as standard";
- result += "\nestablish as minimum), separate statistics analyzer per each resource, automatic CER/CEA and DWR/DWA";
- result += "\ngeneration, expiration control and many more features";
result += "\n";
- result += "\nOPERATIONS INTERFACE";
+ result += "\nCOMMAND LINE";
+ result += "\n------------";
result += "\n";
- result += "\nADL supports several operations via HTTP interface. The HTTP request body content will";
- result += "\nbe an string with a command:";
+ result += "\nStart the launcher process without arguments in order to see all the startup configuration";
+ result += "\n posibilities, many of which could be modified on the air through the management interface";
+ result += "\n (we will talk later about this great feature). Some of the more common parameters are:";
result += "\n";
- result += "\nFor example, we could launch an operation via curl:";
+ result += "\nAs mandatory, the stack definition given through the xml dictionary:";
+ result += "\n -dictionary <path to dictionary file>";
result += "\n";
- result += "\n curl -m 1 --data \"diameterServerSessions|4\" localhost:9000";
- result += "\n curl -m 1 --data \"code|ccr.xml\" localhost:9000";
- result += "\n curl -m 1 --data \"decode|ccr.hex\" localhost:9000";
- result += "\n curl -m 1 --data \"sendxml2e|ccr.xml\" localhost:9000";
- result += "\n etc.";
+ result += "\nActing as a diameter server (accepting i.e. 10 connections), you would have:";
+ result += "\n -diameterServer localhost:3868 -diameterServerSessions 10 -entityServerSessions 0";
result += "\n";
- result += "\nThese are the available commands:";
+ result += "\nActing as a diameter client (launching i.e. 10 connections to each entity server), you would have:";
+ result += "\n -entity 192.168.12.11:3868,192.168.12.21:3868 -entityServerSessions 10 -diameterServerSessions 0";
result += "\n";
+ result += "\nIf you act as a proxy or a translation agent, you need to combine both former setups, and probably";
+ result += "\n will need to program the answers to be replied through the operations interface. To balance the";
+ result += "\n traffic at your client side you shall use '-balance' and '-sessionBasedModelsClientSocketSelection'";
+ result += "\n arguments in order to define the balancing behaviour.";
result += "\n";
- result += "\nGeneral -----------------------------";
+ result += "\nThe process builds automatically CER and DWR messages as a client, but you could specify your own";
+ result += "\n customized ones using '-cer <xml message file>' and '-dwr <xml message file>'.";
+ result += "\nThe process builds automatically CEA and DWA messages as a server, but you could program your own";
+ result += "\n customized ones using operations interface.";
+ result += "\n";
+ result += "\n";
+ result += "\nDYNAMIC OPERATIONS";
+ result += "\n------------------";
+ result += "\n";
+ result += "\nADL supports several operations which could be reconized via HTTP interface or SIGUSR2 caugh.";
+ result += "\nAn operation is specified by mean a string containing the operation name and needed arguments";
+ result += "\n separated by pipes. These are the available commands:";
+ result += "\n";
+ result += "\n--------------------------------------------------------------------------------------- General purpose";
result += "\n";
result += "\nhelp This help. Startup information-level traces also dump this help.";
result += "\n";
- result += "\nParsing operations ------------------";
+ result += "\n------------------------------------------------------------------------------------ Parsing operations";
result += "\n";
result += "\ncode|<source_file>|<target_file> Encodes source file (pathfile) into target file (pathfile).";
result += "\ndecode|<source_file>|<target_file> Decodes source file (pathfile) into target file (pathfile).";
result += "\nloadxml|<source_file> Reinterpret xml source file (pathfile).";
result += "\n";
- result += "\nHot changes -------------------------";
+ result += "\n------------------------------------------------------------------------------------------- Hot changes";
result += "\n";
- result += "\ndiameterServerSessions|<integer> Updates the maximum number of accepted connections to diameter server socket.";
- result += "\ncollect Reset statistics and counters to start a new test stage of performance measurement.";
- result += "\n Context data is written at '/var/tmp/anna.context.<pid>' by mean 'kill -10 <pid>'.";
+ result += "\ndiameterServerSessions|<integer> Updates the maximum number of accepted connections to diameter";
+ result += "\n server socket.";
+ result += "\ncollect Reset statistics and counters to start a new test stage of";
+ result += "\n performance measurement. Context data is written at";
+ result += "\n '/var/tmp/anna.context.<pid>' by mean 'kill -10 <pid>'.";
result += "\n";
result += "\n<visibility action>|[<address>:<port>]|[socket id]";
result += "\n";
- result += "\n Actions: hide, show (update state) and hidden, shown (query state).";
- result += "\n Acts over a client session for messages delivery (except CER/A, DWR/A, DPR/A).";
- result += "\n If missing server (first parameter) all applications sockets will be affected.";
- result += "\n If missing socket (second parameter) for specific server, all its sockets will be affected.";
+ result += "\n Actions: hide, show (update state) and hidden, shown (query state).";
+ result += "\n Acts over a client session for messages delivery (except CER/A, DWR/A, DPR/A).";
+ result += "\n If missing server (first parameter) all applications sockets will be affected.";
+ result += "\n If missing socket (second parameter) for specific server, all its sockets will be affected.";
result += "\n";
- result += "\n All application client sessions are shown on startup, but standard delivery only use primary server ones except if fails.";
- result += "\n Balance configuration use all the allowed sockets. You could also use command line 'sessionBasedModelsClientSocketSelection'";
- result += "\n to force traffic flow over certain client sessions, but for this, hide/show feature seems easier.";
+ result += "\n All application client sessions are shown on startup, but standard delivery only use primary";
+ result += "\n server ones except if fails. Balance configuration use all the allowed sockets. You could also";
+ result += "\n use command line 'sessionBasedModelsClientSocketSelection' to force traffic flow over certain";
+ result += "\n client sessions, but for this, hide/show feature seems easier.";
result += "\n";
- result += "\nFlow operations ---------------------";
+ result += "\n--------------------------------------------------------------------------------------- Flow operations";
result += "\n";
- result += "\nsendxml2e|<source_file> Sends xml source file (pathfile) through configured diameter entity.";
- result += "\nsendxml2c|<source_file> Sends xml source file (pathfile) to diameter client.";
- result += "\nsendxml|<source_file> Same as 'sendxml2e'.";
- result += "\nanswerxml2e|[source_file] Answer xml source file (pathfile) for corresponding request from diameter entity.";
- result += "\nanswerxml2c|[source_file] Answer xml source file (pathfile) for corresponding request from diameter client.";
- result += "\nanswerxml|[source_file] Same as 'answerxml2c'.";
- result += "\n List programmed answers if no parameter provided.";
+ result += "\nsendxml2e|<source_file> Sends xml source file (pathfile) through configured entity.";
+ result += "\nsendxml2c|<source_file> Sends xml source file (pathfile) to client.";
+ result += "\nsendxml|<source_file> Same as 'sendxml2e'.";
+ result += "\nanswerxml2e|[source_file] Answer xml source file (pathfile) for corresponding request from entity.";
+ result += "\nanswerxml2c|[source_file] Answer xml source file (pathfile) for corresponding request from client.";
+ result += "\nanswerxml|[source_file] Same as 'answerxml2c'.";
+ result += "\n List programmed answers if no parameter provided.";
result += "\n";
- result += "\nIf a request is received, answer map (built with 'answerxml<[2c] or 2e>' operations) will be checked to find";
- result += "\na corresponding programmed answer to be replied(*). If no ocurrence is found, or answer message was received,";
- result += "\nthe message is forwarded to the other side (entity or client), or nothing but trace when no peer at that side";
- result += "\nis configured. Answer to client have sense when diameter server socket is configured, answer to entity have";
- result += "\nsense when entity does.";
+ result += "\nIf a request is received, answer map (built with 'answerxml<[2c] or 2e>' operations) will be";
+ result += "\n checked to find a corresponding programmed answer to be replied(*). If no ocurrence is found,";
+ result += "\n or answer message was received, the message is forwarded to the other side (entity or client),";
+ result += "\n or nothing but trace when no peer at that side is configured. Answer to client have sense when";
+ result += "\n diameter server socket is configured, answer to entity have sense when entity does.";
result += "\n";
- result += "\n(*) sequence values (hop-by-hop and end-to-end), Session-Id and Subscription-Id avps, are mirrored to the";
- result += "\n peer which sent the request. If user wants to test a specific answer without changing it, use sendxml";
- result += "\n operations better than programming.";
+ result += "\n(*) sequence values (hop-by-hop and end-to-end), Session-Id and Subscription-Id avps, are mirrored";
+ result += "\n to the peer which sent the request. If user wants to test a specific answer without changing it,";
+ result += "\n use sendxml operations better than programming.";
result += "\n";
- result += "\nBalance ('-balance' command line parameter) could be used to forward server socket receptions through entity servers";
- result += "\nby mean a round-robin algorithm. Both diameter server socket and entity targets should have been configured, that is";
- result += "\nto say: launcher acts as client and server. If no balance is used, an standard delivery is performed: first primary";
- result += "\nentity server, secondary when fails, etc.";
+ result += "\nBalance ('-balance' command line parameter) could be used to forward server socket receptions through";
+ result += "\n entity servers by mean a round-robin algorithm. Both diameter server socket and entity targets should";
+ result += "\n have been configured, that is to say: launcher acts as client and server. If no balance is used, an";
+ result += "\n standard delivery is performed: first primary entity server, secondary when fails, etc.";
result += "\n";
- result += "\nProcessing types --------------------";
+ result += "\n--------------------------------------------------------------------------- Processing types (log tags)";
result += "\n";
- result += "\nUsed as log file extensions (when '-splitLog' is provided on command line) and context preffixes on log details when";
- result += "\nunique log file is dumped:";
+ result += "\nUsed as log file extensions (when '-splitLog' is provided on command line) and context preffixes on log";
+ result += "\n details when unique log file is dumped:";
result += "\n";
result += "\n [sent2e/send2eError] Send to entity (success/error)";
result += "\n [sent2c/send2cError] Send to client (success/error)";
result += "\n [recvfe] Reception from entity";
result += "\n [req2c-expired] A request sent to client has been expired";
result += "\n [req2e-expired] A request sent to entity has been expired";
- result += "\n [recvfc-ans-unknown] Reception from client of an unknown answer (probably former [req2c-expired] has been logged)";
- result += "\n [recvfe-ans-unknown] Reception from entity of an unknown answer (probably former [req2e-expired] has been logged)";
+ result += "\n [recvfc-ans-unknown] Reception from client of an unknown answer (probably former [req2c-expired]";
+ result += "\n has been logged)";
+ result += "\n [recvfe-ans-unknown] Reception from entity of an unknown answer (probably former [req2e-expired]";
+ result += "\n has been logged)";
+ result += "\n";
+ result += "\n-------------------------------------------------------------------------------------------- Load tests";
+ result += "\n";
+ result += "\nburst|<action>|[parameter] Used for performance testing, we first program diameter requests";
+ result += "\n messages in order to launch them from client side to the configured";
+ result += "\n diameter entity. We could start the burst with an initial load";
+ result += "\n (non-asynchronous sending), after this, a new request will be sent";
+ result += "\n per answer received or expired context. There are 10 actions: clear,";
+ result += "\n load, start, push, pop, stop, repeat, send, goto and look.";
result += "\n";
- result += "\nLoad tests --------------------------";
+ result += "\n burst|clear Clears all loaded burst messages.";
+ result += "\n burst|load|<source_file> Loads the next diameter message into launcher burst.";
+ result += "\n burst|start|<initial load> Starts (or restarts if already in progress) the message sending with";
+ result += "\n a certain initial load.";
+ result += "\n burst|push|<load amount> Sends specific non-aynchronous load.";
+ result += "\n burst|pop|<release amount> Skip send burst messages in order to reduce over-the-air requests.";
+ result += "\n Popping all OTA requests implies burst stop because no more answer";
+ result += "\n will arrive to the process. Burst output file (-burstLog command";
+ result += "\n line parameter) shows popped messages with crosses (x). Each cross";
+ result += "\n represents one received answer for which no new request is sent.";
+ result += "\n burst|stop Stops the burst cycle. You can resume pushing 1 load amount.";
+ result += "\n burst|repeat|[[yes]|no] Restarts the burst launch when finish. If initial load or push load";
+ result += "\n amount is greater than burst list size, they will be limited when";
+ result += "\n the list is processed except when repeat mode is enabled.";
+ result += "\n burst|send|<amount> Sends messages from burst list. The main difference with start/push";
+ result += "\n operations is that burst won't be awaken. Externally we could control";
+ result += "\n sending time (no request will be sent for answers).";
+ result += "\n burst|goto|<order> Updates current burst pointer position.";
+ result += "\n burst|look|<order> Show programmed burst message for order provided.";
result += "\n";
- result += "\nburst|<action>|[parameter] Used for performance testing, we first program diameter requests messages in order";
- result += "\n to launch them from client side to the configured diameter entity. We could start";
- result += "\n the burst with an initial load (non-asynchronous sending), after this, a new request";
- result += "\n will be sent per answer received or expired context. There are 10 actions: clear, load";
- result += "\n start, push, pop, stop, repeat, send, goto and look.";
result += "\n";
- result += "\n burst|clear clears all loaded burst messages.";
- result += "\n burst|load|<source_file> loads the next diameter message into launcher burst.";
- result += "\n burst|start|<initial load> starts (or restarts if already in progress) the message sending with a certain initial load.";
- result += "\n burst|push|<load amount> sends specific non-aynchronous load.";
- result += "\n burst|pop|<release amount> skip send burst messages in order to reduce over-the-air requests. Popping all OTA requests";
- result += "\n implies burst stop because no more answer will arrive to the process. Burst output file";
- result += "\n (-burstLog command line parameter) shows popped messages with crosses (x). Each cross";
- result += "\n represents one received answer for which no new request is sent.";
- result += "\n burst|stop stops the burst cycle. You can resume pushing 1 load amount.";
- result += "\n burst|repeat|[[yes]|no] restarts the burst launch when finish. If initial load or push load amount is";
- result += "\n greater than burst list size, they will be limited when the list is processed";
- result += "\n except when repeat mode is enabled.";
- result += "\n burst|send|<amount> send messages from burst list. The main difference with start/push operations is that burst";
- result += "\n won't be awaken. Externally we could control sending time (no request will be sent for answers).";
- result += "\n burst|goto|<order> Updates current burst pointer position.";
- result += "\n burst|look|<order> Show programmed burst message for order provided.";
+ result += "\nUSING OPERATIONS INTERFACE";
+ result += "\n--------------------------";
result += "\n";
+ result += "\n------------------------------------------------------------------------- Operations via HTTP interface";
result += "\n";
+ result += "\nAll the operations described above can be used through the optional HTTP interface. You only have";
+ result += "\n to define the http server at the command line with something like: '-httpServer localhost:9000'.";
+ result += "\nTo send the task, we shall build the http request body with the operation string. Some examples";
+ result += "\n using curl client could be:";
+ result += "\n";
+ result += "\n curl -m 1 --data \"diameterServerSessions|4\" localhost:9000";
+ result += "\n curl -m 1 --data \"code|ccr.xml\" localhost:9000";
+ result += "\n curl -m 1 --data \"decode|ccr.hex\" localhost:9000";
+ result += "\n curl -m 1 --data \"sendxml2e|ccr.xml\" localhost:9000";
+ result += "\n etc.";
+ result += "\n";
+ result += "\n------------------------------------------------------------------------- Operations via SIGUSR2 signal";
+ result += "\n";
+ result += "\nThe alternative using SIGUSR2 signal requires the creation of the task(s) file which will be read at";
+ result += "\n signal event:";
+ result += "\n echo \"<<operation>\" > "; result += SIGUSR2_TASKS_INPUT_FILENAME;
+ result += "\n then";
+ result += "\n kill -12 <pid>";
+ result += "\n or";
+ result += "\n kill -s SIGUSR2 <pid>";
+ result += "\n and then see the results:";
+ result += "\n cat "; result += SIGUSR2_TASKS_OUTPUT_FILENAME;
+ result += "\n";
+ result += "\nYou could place more than one line (task) in the input file. Output reports will be appended in that";
+ result += "\n case over the output file. Take into account that all the content of the task file will be executed";
+ result += "\n sinchronously by the process. If you are planning traffic load, better use the asynchronous http";
+ result += "\n interface.";
+ result += "\n";
+ result += "\n";
+
return result;
}
commandLine.add("logStatisticSamples", anna::CommandLine::Argument::Optional, "Log statistics samples for the provided concept id list, over './sample.<concept id>.csv' files. For example: \"1,2\" will log concepts 1 and 2. Reserved word \"all\" activates all registered statistics concept identifiers. That ids are shown at context dump (see help to get it).");
commandLine.add("burstLog", anna::CommandLine::Argument::Optional, "Burst operations log file. By default 'launcher.burst'. Empty string or \"null\" name, to disable. Warning: there is no rotation for log files (use logrotate or whatever). Output: dot (.) for each burst message sent/pushed, cross (x) for popped ones, and order number when multiple of 1% of burst list size, plus OTA requests when changed.");
// Communications
- commandLine.add("httpServer", anna::CommandLine::Argument::Mandatory, "HTTP Management interface address (using i.e. curl tool) in '<address>:<port>' format. For example: 10.20.30.40:8080");
+ commandLine.add("httpServer", anna::CommandLine::Argument::Optional, "HTTP Management interface address (using i.e. curl tool) in '<address>:<port>' format. For example: 10.20.30.40:8080");
commandLine.add("httpServerShared", anna::CommandLine::Argument::Optional, "Enables shared bind for HTTP Management interface address. It would be useful i.e. to allow a great amount of curl operations per second", false);
commandLine.add("diameterServer", anna::CommandLine::Argument::Optional, "Diameter own server address in '<address>:<port>' format. For example: 10.20.30.40:3868");
commandLine.add("diameterServerSessions", anna::CommandLine::Argument::Optional, "Diameter own server available connections (0: diameter server disabled). Default value of 1");
anna::Logger::information(msg, ANNA_FILE_LOCATION);
);
// HTTP Server:
- anna::comm::Network& network = anna::comm::Network::instantiate();
- std::string address;
- int port;
- anna::functions::getAddressAndPortFromSocketLiteral(cl.getValue("httpServer"), address, port);
-// const anna::comm::Device* device = network.find(Device::asAddress(address)); // aqui hay que proporcionar una IP !
- const anna::comm::Device* device = *((network.resolve(address)->device_begin())); // ArtimaƱa para resolver (IP o hostname)
- a_httpServerSocket = new anna::comm::ServerSocket(anna::comm::INetAddress(device, port), cl.exists("httpServerShared") /* shared bind */, &anna::http::Transport::getFactory());
+ if (cl.exists("httpServer")) {
+ anna::comm::Network& network = anna::comm::Network::instantiate();
+ std::string address;
+ int port;
+ anna::functions::getAddressAndPortFromSocketLiteral(cl.getValue("httpServer"), address, port);
+ //const anna::comm::Device* device = network.find(Device::asAddress(address)); // aqui hay que proporcionar una IP !
+ const anna::comm::Device* device = *((network.resolve(address)->device_begin())); // ArtimaƱa para resolver (IP o hostname)
+ a_httpServerSocket = new anna::comm::ServerSocket(anna::comm::INetAddress(device, port), cl.exists("httpServerShared") /* shared bind */, &anna::http::Transport::getFactory());
+ }
+
// Stack:
anna::diameter::codec::Engine *codecEngine = new anna::diameter::codec::Engine();
anna::diameter::stack::Engine &stackEngine = anna::diameter::stack::Engine::instantiate();
}
a_communicator->setRecoveryTime((const anna::Millisecond)reconnectionPeriod);
- a_communicator->attach(a_httpServerSocket); // HTTP
+ if (cl.exists("httpServer")) a_communicator->attach(a_httpServerSocket); // HTTP
a_communicator->accept();
}
std::string response_content;
try {
- sendOperation(body_content, response_content);
+ Launcher& my_app = static_cast <Launcher&>(anna::app::functions::getApp());
+ my_app.eventOperation(body_content, response_content);
} catch (RuntimeException &ex) {
ex.trace();
}
}
}
-void MyHandler::sendOperation(const std::string &operation, std::string &response_content) throw(anna::RuntimeException) {
- LOGMETHOD(anna::TraceMethod tm("MyHandler", "sendOperation", ANNA_FILE_LOCATION));
- Launcher& my_app = static_cast <Launcher&>(anna::app::functions::getApp());
+void Launcher::eventOperation(const std::string &operation, std::string &response_content) throw(anna::RuntimeException) {
+ LOGMETHOD(anna::TraceMethod tm("Launcher", "eventOperation", ANNA_FILE_LOCATION));
CommandLine& cl(anna::CommandLine::instantiate());
LOGDEBUG(anna::Logger::debug(operation, ANNA_FILE_LOCATION));
response_content = "Operation processed with exception. See traces\n"; // supposed
// Help:
if (operation == "help") {
- std::cout << my_app.help() << std::endl;
+ std::string s_help = help();
+ std::cout << s_help << std::endl;
+ LOGINFORMATION(anna::Logger::information(s_help, ANNA_FILE_LOCATION));
response_content = "Help dumped on stdout and information-level traces (launcher.traces file)\n";
return;
}
// Reset performance data:
if (operation == "collect") {
- my_app.resetCounters();
- my_app.resetStatistics();
+ resetCounters();
+ resetStatistics();
response_content = "All process counters & statistic information have been reset\n";
return;
}
//LOGDEBUG(anna::Logger::debug(anna::functions::asString("Number of operation parameters: %d", numParams), ANNA_FILE_LOCATION));
if (numParams > 2) {
- LOGWARNING(anna::Logger::warning(my_app.help(), ANNA_FILE_LOCATION));
+ LOGWARNING(anna::Logger::warning(help(), ANNA_FILE_LOCATION));
throw anna::RuntimeException("Wrong body content format on HTTP Request", ANNA_FILE_LOCATION);
}
outfile.close();
infile.close();
} else if ((opType == "hide") || (opType == "show") || (opType == "hidden") || (opType == "shown")) {
- anna::diameter::comm::Entity *entity = my_app.getEntity();
+ anna::diameter::comm::Entity *entity = getEntity();
if (!entity) throw anna::RuntimeException("No entity configured to send messages", ANNA_FILE_LOCATION);
key += "|";
key += param2;
- if (opType == "hide") my_app.getMyDiameterEngine()->findClientSession(key)->hide();
+ if (opType == "hide") getMyDiameterEngine()->findClientSession(key)->hide();
- if (opType == "show") my_app.getMyDiameterEngine()->findClientSession(key)->show();
+ if (opType == "show") getMyDiameterEngine()->findClientSession(key)->show();
- if (opType == "hidden") result = my_app.getMyDiameterEngine()->findClientSession(key)->hidden() ? "true" : "false";
+ if (opType == "hidden") result = getMyDiameterEngine()->findClientSession(key)->hidden() ? "true" : "false";
- if (opType == "shown") result = my_app.getMyDiameterEngine()->findClientSession(key)->shown() ? "true" : "false";
+ if (opType == "shown") result = getMyDiameterEngine()->findClientSession(key)->shown() ? "true" : "false";
} else {
std::string address;
int port;
anna::functions::getAddressAndPortFromSocketLiteral(param1, address, port);
- if (opType == "hide") my_app.getMyDiameterEngine()->findServer(address, port)->hide();
+ if (opType == "hide") getMyDiameterEngine()->findServer(address, port)->hide();
- if (opType == "show") my_app.getMyDiameterEngine()->findServer(address, port)->show();
+ if (opType == "show") getMyDiameterEngine()->findServer(address, port)->show();
- if (opType == "hidden") result = my_app.getMyDiameterEngine()->findServer(address, port)->hidden() ? "true" : "false";
+ if (opType == "hidden") result = getMyDiameterEngine()->findServer(address, port)->hidden() ? "true" : "false";
- if (opType == "shown") result = my_app.getMyDiameterEngine()->findServer(address, port)->shown() ? "true" : "false";
+ if (opType == "shown") result = getMyDiameterEngine()->findServer(address, port)->shown() ? "true" : "false";
}
} else {
if (opType == "hide") entity->hide();
if (numParams != 1)
throw anna::RuntimeException("Wrong body content format on HTTP Request for 'sendxml/sendxml2e' operation (missing parameter)", ANNA_FILE_LOCATION);
- anna::diameter::comm::Entity *entity = my_app.getEntity();
+ anna::diameter::comm::Entity *entity = getEntity();
if (!entity) throw anna::RuntimeException("No entity configured to send the message", ANNA_FILE_LOCATION);
bool success = entity->send(G_commMsgSent2e, cl.exists("balance"));
// Detailed log:
- if (my_app.logEnabled()) {
+ if (logEnabled()) {
anna::diameter::comm::Server *usedServer = entity->getLastUsedResource();
anna::diameter::comm::ClientSession *usedClientSession = usedServer ? usedServer->getLastUsedResource() : NULL;
std::string detail = usedClientSession ? usedClientSession->asString() : "<null client session>"; // esto no deberia ocurrir
- my_app.writeLogFile(G_codecMsg, (success ? "sent2e" : "send2eError"), detail);
+ writeLogFile(G_codecMsg, (success ? "sent2e" : "send2eError"), detail);
}
} else if ((opType == "burst")) {
if (numParams < 1)
throw anna::RuntimeException("Wrong body content format on HTTP Request for 'burst' operation (missing action parameter)", ANNA_FILE_LOCATION);
- anna::diameter::comm::Entity *entity = my_app.getEntity();
+ anna::diameter::comm::Entity *entity = getEntity();
if (!entity) throw anna::RuntimeException("No entity configured to use burst feature", ANNA_FILE_LOCATION);
if (param1 == "clear") {
result = "Removed ";
- result += anna::functions::asString(my_app.clearBurst());
+ result += anna::functions::asString(clearBurst());
result += " elements.";
} else if (param1 == "load") {
if (param2 == "") throw anna::RuntimeException("Missing xml path file for burst load operation", ANNA_FILE_LOCATION);
if (G_codecMsg.isAnswer()) throw anna::RuntimeException("Cannot load diameter answers for burst feature", ANNA_FILE_LOCATION);
try { G_codecMsg.valid(); } catch (anna::RuntimeException &ex) { ex.trace(); } // at least we need to see validation errors although it will continue loading (see validation mode configured in launcher)
- int position = my_app.loadBurstMessage(G_codecMsg.code());
+ int position = loadBurstMessage(G_codecMsg.code());
result = "Loaded '";
result += param2;
result += "' file into burst list position ";
if (param2 == "") throw anna::RuntimeException("Missing initial load for burst start operation", ANNA_FILE_LOCATION);
int initialLoad = atoi(param2.c_str());
- int processed = my_app.startBurst(initialLoad);
+ int processed = startBurst(initialLoad);
if (processed > 0) {
result = "Initial load completed for ";
} else if (param1 == "push") {
if (param2 == "") throw anna::RuntimeException("Missing load amount for burst push operation", ANNA_FILE_LOCATION);
- int pushed = my_app.pushBurst(atoi(param2.c_str()));
+ int pushed = pushBurst(atoi(param2.c_str()));
if (pushed > 0) {
result = "Pushed ";
if (param2 == "") throw anna::RuntimeException("Missing amount for burst pop operation", ANNA_FILE_LOCATION);
int releaseLoad = atoi(param2.c_str());
- int popped = my_app.popBurst(releaseLoad);
+ int popped = popBurst(releaseLoad);
if (popped > 0) {
result = "Burst popped for ";
result += ".";
}
} else if (param1 == "stop") {
- int left = my_app.stopBurst();
+ int left = stopBurst();
if (left != -1) {
result += anna::functions::entriesAsString(left, "message");
if (param2 == "") param2 = "yes";
bool repeat = (param2 == "yes");
- my_app.repeatBurst(repeat);
+ repeatBurst(repeat);
result += (repeat ? "Mode on." : "Mode off.");
} else if (param1 == "send") {
if (param2 == "") throw anna::RuntimeException("Missing amount for burst send operation", ANNA_FILE_LOCATION);
- int sent = my_app.sendBurst(atoi(param2.c_str()));
+ int sent = sendBurst(atoi(param2.c_str()));
if (sent > 0) {
result = "Sent ";
} else if (param1 == "goto") {
if (param2 == "") throw anna::RuntimeException("Missing order position for burst goto operation", ANNA_FILE_LOCATION);
- result = my_app.gotoBurst(atoi(param2.c_str()));
+ result = gotoBurst(atoi(param2.c_str()));
result += ".";
} else if (param1 == "look") {
if (param2 == "") throw anna::RuntimeException("Missing order position for burst look operation", ANNA_FILE_LOCATION);
result = "\n\n";
- result += my_app.lookBurst(atoi(param2.c_str()));
+ result += lookBurst(atoi(param2.c_str()));
result += "\n\n";
} else {
throw anna::RuntimeException("Wrong body content format on HTTP Request for 'burst' operation (unexpected action parameter). See help", ANNA_FILE_LOCATION);
if (numParams != 1)
throw anna::RuntimeException("Wrong body content format on HTTP Request for 'sendxml2c' operation (missing parameter)", ANNA_FILE_LOCATION);
- anna::diameter::comm::LocalServer *localServer = my_app.getDiameterLocalServer();
+ anna::diameter::comm::LocalServer *localServer = getDiameterLocalServer();
if (!localServer) throw anna::RuntimeException("No local server configured to send the message", ANNA_FILE_LOCATION);
bool success = localServer->send(G_commMsgSent2c);
// Detailed log:
- if (my_app.logEnabled()) {
+ if (logEnabled()) {
anna::diameter::comm::ServerSession *usedServerSession = localServer->getLastUsedResource();
std::string detail = usedServerSession ? usedServerSession->asString() : "<null server session>"; // esto no deberia ocurrir
- my_app.writeLogFile(G_codecMsg, (success ? "sent2c" : "send2cError"), detail);
+ writeLogFile(G_codecMsg, (success ? "sent2c" : "send2cError"), detail);
}
} else if (opType == "loadxml") {
if (numParams != 1)
int diameterServerSessions = atoi(param1.c_str());
- if (!my_app.getDiameterLocalServer())
- my_app.startDiameterServer(diameterServerSessions);
+ if (!getDiameterLocalServer())
+ startDiameterServer(diameterServerSessions);
else
- my_app.getDiameterLocalServer()->setMaxConnections(diameterServerSessions);
+ getDiameterLocalServer()->setMaxConnections(diameterServerSessions);
} else if ((opType == "answerxml") || (opType == "answerxml2c")) {
- anna::diameter::comm::LocalServer *localServer = my_app.getDiameterLocalServer();
+ anna::diameter::comm::LocalServer *localServer = getDiameterLocalServer();
if (!localServer)
throw anna::RuntimeException("Operation not applicable (no own diameter server has been configured)", ANNA_FILE_LOCATION);
G_reactingAnswers2C[code] = message;
} else { // answers query on stdout
- std::cout << my_app.programmedAnswers2c() << std::endl;
+ std::cout << programmedAnswers2c() << std::endl;
response_content = "Programmed answers dumped on stdout\n";
return;
}
} else if ((opType == "answerxml2e")) {
- anna::diameter::comm::Entity *entity = my_app.getEntity();
+ anna::diameter::comm::Entity *entity = getEntity();
if (!entity)
throw anna::RuntimeException("Operation not applicable (no diameter entity has been configured)", ANNA_FILE_LOCATION);
G_reactingAnswers2E[code] = message;
} else { // answers query on stdout
- std::cout << my_app.programmedAnswers2e() << std::endl;
+ std::cout << programmedAnswers2e() << std::endl;
response_content = "Programmed answers dumped on stdout\n";
return;
}
} else {
- LOGWARNING(anna::Logger::warning(my_app.help(), ANNA_FILE_LOCATION));
+ LOGWARNING(anna::Logger::warning(help(), ANNA_FILE_LOCATION));
throw anna::RuntimeException("Wrong body content format on HTTP Request. Unsupported/unrecognized operation type", ANNA_FILE_LOCATION);
}