6 ADML_INSTANCES=`cat .st_conf_adml_instances 2>/dev/null`
7 RATE_PER_INSTANCE=`cat .st_conf_rate_per_instance 2>/dev/null`
8 DESIRED_RATE=`cat .st_conf_desired_rate 2>/dev/null`
9 REPEATS=`cat .st_conf_cycle_repeats 2>/dev/null`
10 PROGRAM_LAYOUT_FILE=.st_conf_n_testcases_program_layout
11 [ -z "$ADML_CONCURRENT_PROVISION_JOBS" ] && ADML_CONCURRENT_PROVISION_JOBS=20
23 Usage: $0 <test stuff directory|dynamic> [-s]
25 Performs test case programming from scratch (current test cases will be dropped
26 from ADML involved instances). There are two types of programming depending on
27 the first argument provided:
31 The folder provided must contain msk files, specially a testcase file with
32 xml files referenced inside. Those xml files (without the .msk extension)
33 shall exists in the directory. For example:
35 $0 st_examples/DynamicQualification
37 Optionally, a file 'specific' could exists containing testcase-specific
38 information, which normally will be used to specify database sentences.
39 This file will be accumulated as a cloning seed over the file 'specific.all'
40 created on test stuff directory.
42 Template type programming could be used for medium-duration testings, because
43 the scripting used for programming, have lots of groups divisions which even
44 background-executed are much more slower on programming than a c++ builtin
45 procedure: dynamic type is the one for large sets of test cases:
50 The current dynamic procedure selected by mean 'dynlibs/select.sh' script,
51 will be programmed using its dirname resources: inside, you may found not
52 only the .so library but the needed xml files for the implemented scenary
53 and a file called 'dynamic.suffix' used to complete the dynamic operation
56 dynamic|<timeout ms>|<initial sequence>|<final sequence>|<dynamic.suffix content>
58 For example, you could have this content for 'dynamic.suffix':
60 0|7|CCR-I.xml|CCR-T.xml (0 for timeout means no timeout step)
62 in order to generate the operation:
64 dynamic|0|<initial sequence>|<final sequence>|7|CCR-I.xml|CCR-T.xml
66 which would be parsed for the specific ADML instance programmed:
68 dynamic|0|2000001|2001000|7|CCR-I.xml|CCR-T.xml
70 The file 'dynamic.suffix' could have several lines for several scenaries.
71 In this case, this script will prompt for the desired one.
73 This script will build every operation for the configured ADML instances
74 to complete all the sequence ranges along the whole test system.
78 -s: start testing just after programming, using desired rate: $DESIRED_RATE test cases per second.
80 [ $ADML_INSTANCES -gt 1 ] && echo " In your case, with $ADML_INSTANCES, a rate of $RATE_PER_INSTANCE ttps will be send per instance."
85 advice_to_squeeze_idle_cpu () {
86 local idle=$(top -b -d 0.1 -n 2 | grep 'Cpu(s):'| tail -1 | awk '{print $8}' | sed 's/,/./')
89 echo "Idle cpu now: $idle. Check the system CPU with top. If is not overcommited, consider"
90 echo " increase the environment variable 'ADML_CONCURRENT_PROVISION_JOBS' (now $ADML_CONCURRENT_PROVISION_JOBS)."
92 echo "Press ENTER to continue ..."
100 [ ! -f .st_conf_adml_instances ] && miss_conf=yes
101 [ ! -f .st_conf_n_testcases_program_layout ] && miss_conf=yes
102 [ ! -f .st_conf_cycle_repeats ] && miss_conf=yes
103 [ ! -f .st_conf_rate_per_instance ] && miss_conf=yes
104 [ ! -f .st_conf_desired_rate ] && miss_conf=yes
105 [ -n "$miss_conf" ] && _exit "You must run './configure.sh' script firtly !!"
109 echo "Testcases programming ..."
113 [ $? -eq 1 ] && _exit "Fix status to continue ..."
115 # We launch in background !
116 #./operation.sh --ping >/dev/null
117 #[ $? -ne 0 ] && _exit "Programming aborted (some ADML client process is not running) !"
123 # test case stuff programming #########################################################
124 if [ "$PROG_TYPE" != "dynamic" ]
126 TESTCASE_DIR=$PROG_TYPE
128 [ ! -d $TESTCASE_DIR ] && _exit "Cannot found the test directory '$TESTCASE_DIR' !!"
129 TESTCASE=( `ls $TESTCASE_DIR/testcase*msk 2>/dev/null` )
130 TESTCASE_FILES=${#TESTCASE[@]}
131 [ $TESTCASE_FILES -ne 1 ] && _exit "One and only one 'testcase*msk' file must be present !!"
133 MAX_NUMBER_GROUPS=$(grep ^MAX_NUMBER_GROUPS= clone.sh | cut -d= -f2)
134 CLONE_GROUPS=$((MAX_NUMBER_GROUPS/ADML_INSTANCES))
137 [ -f $TESTCASE_DIR/specific ] && specific=specific
142 instance=$(echo $line | awk '{ print $1 }')
143 ini_seq=$(echo $line | awk '{ print $2 }')
144 fin_seq=$(echo $line | awk '{ print $3 }')
145 ADML_DIR=`readlink -f ADMLS/ADML-$instance`
146 echo -e "\rCloning interval [$ini_seq,$fin_seq] for $(basename $ADML_DIR) ..."
147 ./clone.sh $ADML_DIR $TESTCASE $ini_seq $fin_seq $CLONE_GROUPS $specific &
150 if [ $count -eq $ADML_CONCURRENT_PROVISION_JOBS ]
156 done < $PROGRAM_LAYOUT_FILE
158 # Advice for idle cpu:
159 advice_to_squeeze_idle_cpu
161 # Wait background jobs to finish:
163 echo "Waiting for clone completion ..."
164 echo "(please be patient, this may take a while)"
166 echo "Background Jobs: $(jobs -p | wc -l)"
170 echo "Programming has finished !"
173 echo "Configuring repeat cycles ..."
174 ./operation.sh "test|repeats|$REPEATS"
176 if [ -n "$specific" ]
178 echo "A new file '$TESTCASE_DIR/specific.all' has been created."
179 echo "Probably you need to apply it before starting traffic."
181 echo "Press ENTER to continue, CTRL-C to abort ..."
185 # dynamic programming #################################################################
187 TESTCASE_DIR=$(readlink -f dynlibs/libanna_dynamicLauncherProcedure.so | xargs dirname)
188 DYNAMIC_SUFFIX_FILE=$TESTCASE_DIR/dynamic.suffix
190 [ ! -f $DYNAMIC_SUFFIX_FILE ] && _exit "Missing '$DYNAMIC_SUFFIX_FILE' file.\nUse 'dynlibs/select.sh' to change the dynamic procedure and restart the ADML instances."
191 dynamic_suffix=( $(grep -v ^# $DYNAMIC_SUFFIX_FILE) )
193 # Multiple scenarios:
194 suffixes=${#dynamic_suffix[@]}
195 if [ $suffixes -gt 1 ]
198 echo "----------------------------------------------------------------"
199 cat $DYNAMIC_SUFFIX_FILE
200 echo "----------------------------------------------------------------"
202 echo "Detected $suffixes scenarios:"
206 for line in $(grep -v ^# $DYNAMIC_SUFFIX_FILE)
213 echo "Select the desired option (0 to input a user defined one):"
215 while [ -z "$option" ]; do read option ; done
216 if [ "$option" != "0" ]
218 dynamic_suffix=$(grep "^${option}) " $tmpfile | cut -d" " -f2-)
219 [ -z "$dynamic_suffix" ] && _exit "Invalid option !"
221 echo "Input specific program arguments:"
222 echo " (be sure that are supported by the dynamic procedure)"
225 while [ -z "$dynamic_suffix" ]; do read dynamic_suffix ; done
229 # Modify xml files path:
230 xmls=( $(echo $dynamic_suffix | sed 's/'\|'/ /g') )
231 dynamic_suffix=$(for xml in ${xmls[@]}
233 echo $xml | grep -q "\.xml$"
234 [ $? -eq 0 ] && echo -n "$TESTCASE_DIR/"
236 done | sed 's/'\|'$//')
238 # If still idle CPU, you could increase chunks number of background jobs
239 echo "Dynamic programming ..."
243 instance=$(echo $line | awk '{ print $1 }')
244 ini_seq=$(echo $line | awk '{ print $2 }')
245 fin_seq=$(echo $line | awk '{ print $3 }')
246 ADML_DIR=`readlink -f ADMLS/ADML-$instance`
249 ./operation.sh -t 60 "dynamic|$ini_seq|$fin_seq|$dynamic_suffix" &
252 if [ $count -eq $ADML_CONCURRENT_PROVISION_JOBS ]
259 done < $PROGRAM_LAYOUT_FILE
261 # Advice for idle cpu:
262 advice_to_squeeze_idle_cpu
269 if [ "$AUTOSTART" = "-s" ]
275 To start testing, you must use the './operation.sh' script. The most
276 common commands used for testing are:
278 - Enable reports dump for failed tests: ./operation.sh "test|report|failed"
279 - Launch traffic: ./operation.sh "test|ttps|<test ticks per second (*)>"
281 (*) this is related to a single instance, because operation script launched
282 here invokes every 'ADMLS/ADML-<instance>/operation.sh' counterpart
283 script. Then, you should divide the desired CPS by the number of
284 instances. For example, if you need $DESIRED_RATE test cases per second,
285 as you have $ADML_INSTANCES instances, then you should execute:
287 ./operation.sh "test|ttps|$RATE_PER_INSTANCE"
289 - Stop traffic: ./operation.sh "test|ttps|0"
290 - Reset already classified (Success/Failed) test cases: ./operation.sh "test|reset[|soft]"
291 - Reset also 'in-progress' state test cases: ./operation.sh "test|reset|hard"
292 - Clear programmed test cases: ./operation.sh "test|clear"
294 Remember that './operation.sh' broadcasts the operation scripts inside
295 the ADML instances, then some operations should better be used within
296 a specific 'ADMLS/ADML-<instance>' directory to avoid console spam:
298 - Check a testcase in runtime: ADMLS/ADML-001/operation.sh "test|look|<test id>"
299 - Execute the next programmed test case: ADMLS/ADML-001/operation.sh "test|next"
300 - Interactive-step execution: ADMLS/ADML-001/operation.sh "test|interact|<steps to execute>|<test id>"
301 - Summary: ADMLS/ADML-001/operation.sh "test|summary"
303 For a complete and detailed information, execute: ./operation.sh --help | less
305 You could also use './launchCPS.sh' script.
311 if [ -n "$start_testing" ]
314 echo "Start testing to achieve desired rate of $DESIRED_RATE test cases per second ..."
316 ./operation.sh "test|ttps|$RATE_PER_INSTANCE"